Jump to content
SAU Community

Recommended Posts

Hi guys so I have a customer's car in ready for some fab work and something has caught my eye & I believe it's going to cause alot of issues but the customer has been reassured by his engine builder that its fine. But basically they have put a 10mm spacer under 1 engine mount to keep the sump off the steering rack. The mount isn't even sitting flush on the chassis either. Refer to 2nd picture. I will let the pictures do the talking. 

Appreciate any feedback you might have. 

20200520_092348.jpg

20200520_093708.jpg

Link to comment
https://www.sau.com.au/forums/topic/480426-dry-sump-rb2630-fitment-issues/
Share on other sites

In my opinion the motor needs to come out and the sump needs to be notched around the rack. 

You Can see in this pic here where the issue is and it's already been rubbing. 

What issues do you smart gents foresee happening in this situation?

20200516_125725.jpg

That is pretty ghetto. Considering if you are messing around with a dry sump it is a serious build, not a backyard shit box.

no way would i be ok with that, especially considering it is an AWD car.

Yep it's a serious bit of kit. I wouldn't be happy with it either. 

Think it would eventually crack the sump?  

Diff is obviously gunna be loaded up more on 1 side than the other. Especially when the motor running and twisting under power!

As you can see the engine mount is floating on the chassis already 

4 hours ago, Mick_o said:

Yep it's a serious bit of kit. I wouldn't be happy with it either. 

Think it would eventually crack the sump?  

Diff is obviously gunna be loaded up more on 1 side than the other. Especially when the motor running and twisting under power!

As you can see the engine mount is floating on the chassis already 

Ally fretting on steel cross member is either going to wear it paper thin, or cause fatigue.  Problem in the making.

Also I'd reckon the mounts require a zero set - twisting it (power train) while tightening it all down is only going to introduce stress points under load as you say.

Matt's solution looks the goods.

3 hours ago, R32 TT said:

Had same issue - but did something about it.

 

IMG_6671.thumb.jpg.cf19ad57f934d2ee35422dfc3bbed7a4.jpgIMG_6668.thumb.jpg.08122df54ab340d368e9af19da31cede.jpg

IMG_6691.jpg

IMG_6694.jpg

IMG_6696.jpg

IMG_6697.jpg

Thanks mate! That was exactly what I was thinking needed to happen. Unfortunately the owner is going to run with the spacers as he has been reassured there wont be a problem 

  • Like 1

Wow really?   

I don't think I would like a sump resting on, or chafing on, the subframe like that.   Ironic that you would put a dry sump in for ultimate reliability in oil supply, and then let something like this through.

Edited by R32 TT
  • Like 2
  • Sad 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...