Jump to content
SAU Community

Recommended Posts

Ok, first off, before I go any further YES im aware of the search button, I'm aware this subject has been covered probably a million times over. And yes I've done abit of research...but just out of curiosity for the 4 people who still give feedback on this site.

- I'm looking for potential turbo options for my 25neo det

My style of driving is mainly spirited runs through the hills, and potentially grip days/hill climb days down the track.

Not looking for 500+kws  just maximum response from 0-180

E.g hi flow 0p6, 3076, tdo6, 25-660 ect

Link to comment
https://www.sau.com.au/forums/topic/480555-turbo-options/
Share on other sites

Something worth thinking about is, are you prepared to do this job twice? 

Say you buy the ATR45, and for whatever reason you aren't 100% satisfied. Are you prepared to pull the turbo off, sell it 2nd hand and throw on a $$ turbo?

If you can do the labor and tune it yourself, you might only be out of pocket a few hundred $$. Not bad. But if your paying for the install and tune, you could be out of pocket a couple of thousand $$! Maybe that's ok with you, maybe it's not. 

If you don't want to do this job twice, it might be worth saving up for that big shiny $$ turbo. Hey, if your still not satisfied, you know there is literally nothing better in that category of turbo (and really what your wanting then is a unicorn turbo that makes 20psi at 2000 rpm and flows 500kw which doesn't exist haha). 

my 2c. 

Edited by Murray_Calavera
  • Like 1
  • Thanks 1
Link to comment
https://www.sau.com.au/forums/topic/480555-turbo-options/#findComment-7932495
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...