Jump to content
SAU Community

Wiper Blades - CPV35

Oliver.Wong
 Share

Recommended Posts

nickcorr Proficient

nickcorr

Posted
Posted

Order the proper off set ones from Nissan, but get some new refills from SCA to tide you over...

Found some close ones at Autobarn when I had my Skyline, and threw away the old ones, before I realised that the new ones were a close fit, not an exact fit, and did not have the offset mount, so had blades that were 1cm to the left of where they were supposed to be... ? 

The Max Mentor

The Max

Posted
Posted

Won't help you if you're in a hurry to get replacement wipers but unless someone has found the Australian equivalents here, I have Bosch Icon (complete arms) on mine, which I bought from the US via eBay. They are mounted in the opposite direction of what they were intended for, given the RHD vs LHD thing, so they look a little oddly placed. Bugger it though - they work and they work really well.

The Max Mentor

The Max

Posted
Posted

They just perform better for longer compared to all the usual blades you find at our typical retailers in Oz. They have a funky design to them to combat winds at high speeds so that the wind isn't fighting against your wiper motor on the freeway but in reality, you'd have to be doing some seriously illegal speeds or driving through a hurricane to have that as a problem. That, however, is why they look a little oddly placed when upside down.

The Max Mentor

The Max

Posted
Posted

Fair question but I read this and figured if it really is the case, then that's the way I'll go.

https://f30.bimmerpost.com/forums/showpost.php?s=b24f005f56e46e74ecc0926c5b0349d9&p=19652599&postcount=13

I know it's dangerous to take the word of a BMW driver but I like to live on the edge sometimes.

niZmO_Man Grand Master

niZmO_Man

Posted
Posted
On 24/07/2020 at 3:14 PM, The Max said:

Fair question but I read this and figured if it really is the case, then that's the way I'll go.

https://f30.bimmerpost.com/forums/showpost.php?s=b24f005f56e46e74ecc0926c5b0349d9&p=19652599&postcount=13

I know it's dangerous to take the word of a BMW driver but I like to live on the edge sometimes.

I'm a BMW driver now ?

I can't see why you can't just bung in ICON or AeroTwin. Hell since it's a Nissan I'm assuming they have J-hook wiper connection (easy peasy to change).

The Max Mentor

The Max

Posted
Posted
2 hours ago, niZmO_Man said:

I can't see why you can't just bung in ICON or AeroTwin. Hell since it's a Nissan I'm assuming they have J-hook wiper connection (easy peasy to change).

Because I haven't seen any Bosch Icon wipers sold here in Australia, only Aerotwin. The Icon wipers are made for LHD instead of RHD. Replacing them is definitely as easy as you describe but their orientation is a bit odd for the reason I explained before about the funky asymmetrical aerodynamic design.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...