Jump to content
SAU Community

Recommended Posts

8 minutes ago, GTSBoy said:

So, capable of more flow. If needed. Which usually is not the case.

Don't worry, I'm with you, I said it earlier. Issues are usually airflow and oil cooling. 

  • Like 1
  • 3 months later...

Its been a while, but after 4 months, my GrA Reimax waterpump has been installed. I also replaced the GKTech fan with a new OEM R32 Fan. Everything else is the way it was prior.

The reason I went all out was to try fix my annoying(picky) ECT creeping up at idle. It def ran cooler. I noticed that the temps would come down ALOT quicker. Cruising temps on the motorway is around 72-74 for ECT, same as my oil. I have seen the temps down to 67 in the arvo a few times while driving too(its summer time here too).

Has the waterpump made a difference? Yes I think so. 

The other day, I took it for a drive on a HOT day(27-28). Felt so much hotter, plus I purposely drove through lots of traffic. Max ECT was 82.

My ECT temps at idle we ALOT more stable. Prior, it would creep from say 78 through to 82~ in say under 2 mins, and my 2200CFM AC Fan would come on at 85 which would struggle to bring it back down.

Now, the fan doesnt come on. Mind you, I now run a sequential box, and have heat wrapped my downpipe soo..I had a habit of coasting it in neutral everytime(Never used engine braking), but now I have to stay in gear and engine brake all the time which will aid in temps as there's no spark when you decel in gear.

Would it have made the same difference without the box and the heat wrapping? I think it would have. It was my idle temps that was the issue for me, and that seems to be much better(Might be too early to say its fixed).

  • Like 1
20 hours ago, joshuaho96 said:

I wouldn't be all that concerned about coolant temps until 90C but sounds like it worked out for you.

As I said, I was never worried about how high my ECT peaked.. but moreso how fast it creeped. Need to do more testing to conclusively say its a closed book.

On 25/01/2023 at 9:26 AM, Predator1 said:

I also replaced the GKTech fan with a new OEM R32 Fan.

I feel this is what made the difference, however my thoughts are subjective and not based on any data on Skylines.

(Did have 3x S15s with overheating issues at the track, told all 3x to put back the OEM fan blade and... Yep no more overheating).

  • Like 2

Yes, I have also heard the gktech fans are not the best. I have just splurged on an FPG unit, so hopefully that works out well..

The only other thing I can think of would be to go to an electric water pump, which would give you full control of flow at any vehicle speed. I see that PRP have a new RB electric pump that has been released. This is the way I would go when my pump needs replacing..

  • Like 1
On 25/01/2023 at 9:11 AM, joshuaho96 said:

I wouldn't be all that concerned about coolant temps until 90C but sounds like it worked out for you.

90c? 

When racing heavy loaded circuit, I wouldn't lift off until I got to 112 degrees. This was with 600awhp. 

I would ease off at 112c, and it would start dropping back almost immediately. 

90c is nothing. Lots of modern engines run at 100 degrees as standard. 

all the way up to 110 degrees is okay, just start watching it above that. 113c is my hard limit. 

28 minutes ago, The Mafia said:

90c? 

When racing heavy loaded circuit, I wouldn't lift off until I got to 112 degrees. This was with 600awhp. 

I would ease off at 112c, and it would start dropping back almost immediately. 

90c is nothing. Lots of modern engines run at 100 degrees as standard. 

all the way up to 110 degrees is okay, just start watching it above that. 113c is my hard limit. 

Jono living on the edge haha...

I play it a tiny bit safer, just trim the limiter to tell me the car is getting warm. Ain't nobody got time for gauges when you're racing.

image.thumb.png.3c96a52b934add81af6ef65d8220bc2c.png

10 minutes ago, Dose Pipe Sutututu said:

Jono living on the edge haha...

I play it a tiny bit safer, just trim the limiter to tell me the car is getting warm. Ain't nobody got time for gauges when you're racing.

image.thumb.png.3c96a52b934add81af6ef65d8220bc2c.png

haha mate, I definitely don't have time for gauges. 

I get a very big red full screen on my dash alerting me when I'm at 112 degrees, it's a bit hard to miss. 

At 113c, it starts to pull the limiter down. 

  • Like 1
  • 11 months later...
  • 3 weeks later...
On 13/01/2024 at 3:57 PM, SiR_RB said:

So these pumps have been out for sale now for some years

 

has anyone here used one and whats the comparison to an oem or even n1 unit ?

I posted one a few replies up. Before I parked her up, I did lots of highway pulls. I def noticed that the ECT was alot more stable. Did lots pulls in high gears to redline and I was def happy. Safe to say my ECT issues were completely fixed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...