Jump to content
SAU Community

Recommended Posts

Hi all, l didn’t want to put anything on the forum, however l am unable to work this out and am extremely frustrated, hopefully someone can give me some good direction.

the car blew a cooler hose, since then it has developed a miss at approx 5,000 rpm upwards.

the strange thing is that it now fowls only plug number 6.

all others are fine.

changed coil packs around and same issue.

new coil loom, same. Car runs, idles and drives fine, as long as you don’t go past 5.000 rpm.

running apexi fc. Has had tune. Developed this after the tune. However was running amazing until the hose blew off. 
Boost is a conservative 15.

if anyone can give me some direction it would be greatly appreciated.

regards.

 

 

 

Link to comment
https://www.sau.com.au/forums/topic/483695-r33-s15-missing-at-5000rpm-onwards/
Share on other sites

Sounds like it had a boost leak ( the cooler hose about to pop off) and was tuned to suit that. Now boost leaknis gone tune is wrong.

 

Did you pressure test the cooler pipes before the tune?

 

Yes, plugs changed, several sets now.

has had new cooler piping both sides.

turbo  side to air filter done pre tune. Intake done only a week ago. Still same problem.

 

Car ran perfect after tube, 232rwkw. @ 15psi.

drove it 250kms after tune, no issue. Gave it a few short drives and it, again, was perfect.

blew the intake pipe to plenum off. 

once this happened it ran like shit.

changed plugs as they were all Fouled. 
since then it has had the issue.

Appreciate everyone’s input.

 


 

I have seen a car foul plugs mysteriously more than others, and it turned out to be the diaphragm in the FPR that had failed, sending fuel into the plenum into two cylinders specifically.

Something mechanical has let go in the cylinder that is fouling. It would be very suprising to somehow make a tune that only fouls 1 cylinder unless you are playing with cylinder trims, which I don't think is very common on a powerFC.

You need more data available to you. Is the problem spark related? Fuel related? You may need a dyno to figure this out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...