Jump to content
SAU Community

Recommended Posts

If you do this....

2 hours ago, nitznair said:

Better to get an engineer on board from the get go.

...then you don't have to worry so much about this....

3 hours ago, nitznair said:

if there are any issues arising from the conversion, that are picked during the certification process, the conversion shop can rectify them there and then

Besides, if it were me, I'd be wanting to know I had a shop close to home that is useful for such things anyway.

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13 minutes ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Damn man! Stock cats should pass emissions aye? Do you know of any other "trusted" engineers mate? 

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6 minutes ago, MrRx7s3 said:

Man my r34 was basically stock and failed with stock cat by a mile, ended up getting a euro 5 spec cat installed and just passed... also before you go for the test go for a nice spirited 30-45 minute drive get the cat nice and hot.

even the bloke at the testing centre was telling me that this law is pathetic, they want a 20+ year old car to pass emissions as if it were brand new, he also said that if you get a brand new car put a few hundred kms on it and it will fail emissions... I'll shoot my engineer a message see if he knows someone, he was great very helpful and half the price of everyone else.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

9 hours ago, nitznair said:

Ohhhh it has to pass current emissions standards? That's f**ked! Lol. Mines a 2003 V35 Skyline, thats going to be LS swapped 😂😂

That would be really helpful bro. Do let me know if he replies please. 

No it doesn't. It has to meet the standards that was in place at the time the vehicle was constructed. 

If your car was, I think, older then 1985, then you don't need an emissions test as there were no emissions standards/requirements at that time. 

If you are having trouble passing emissions, have a chat with a good tuner. It's not 'hard' to pass emissions, the car just has to be setup to pass emissions....  again this just adds to the overall cost involved in getting your certification. 

I am 100% confident that I could tune/setup a skyline to pass emissions and I'm not a professional tuner by trade.

21 hours ago, MrRx7s3 said:

Mod plate won't help you in NSW. Hardest part of getting engineered in NSW is passing emissions. Engineer that did my r34 stopped doing engineers certs so won't be able to help you there sorry.

I once hinted that a supercharged engine would probably fail (because of emissions) and man did i get burnt by an angry member.

PS: you may wish to edit your post and remove all the carriage returns. I had to take it out of the above quote.

Edited by Vee37
4 minutes ago, nitznair said:

Would putting on a bunch of catalytic converters lower emissions? 

Say for example you have 4 cats on your exhaust, instead of the usual 2

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

17 minutes ago, Murray_Calavera said:

No, the cat needs to come up to temperature before it works. Plugging up the exhaust with multiple cats will not help you.

Just get a good quality euro 5 or 6, 400+ cell cat and you'll be fine.

And then once you pass emissions, get a custom straight pipe done aye? 🤣

Once you get the engineers, its just doing pink slips yearly and rego? No more dramas yeah? 

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

2 minutes ago, Duncan said:

correct, except importantly you can get defected at any time if the police *think* your car may not be legal, engineered or not. You will need to have the car re-inspected if so which would include checking back to the engineered details

Ahhh gotcha. Yep no silly things like dark tints, slammed to the ground, overly loud exhaust, driving like a dumb flamin mongrel etc aye 🤣🤣. Just try to look and drive as "stock" as possible 😉🤣🤣

2 hours ago, nitznair said:

Yep no silly things like

2 hours ago, nitznair said:

a custom straight pipe

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

  • Like 1
3 minutes ago, GTSBoy said:

You would be best to retain a cat. A nice big low cell count cat will do something to clean up the exhaust and largely prevent the big black stain that would be a giveaway to the above if you just had a 1 cell cat.

Ohh that's good advice man. Like a 100 cell or something aye? 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...