Jump to content
SAU Community

Recommended Posts

Hey Guys

 

My name is Mile and Im a newby on this site :)

 

Im in the process of becoming a R34 GTR owner and would like some advice and thoughts to help me with some decisions.

 

1. Would anyone prefer to own a 2001 series 2 base model over a 1999 series 1 vspec model? 

 

2. What your thoughts are on current value of both ? (feel free to give me your thoughts on all 4 x options.... series 1 base / vspec and series 2 base / vspec2 models)

 

3. Order of preferred colour between Bayside (TV2), White (QM1), Athlete Silver (KV2) & Black (GV1)

 

Based on both options being like for like condition wise with same / no mods and with approximately 100,000km on the clock. Full books, grade 4 condition, ticks all the boxes etc.

 

Keep in mind when advising on both options that I will be updating the suspension, wheels, exhaust, filter, computer upgrade etc etc once I find the right example. Mods will be just standard bolt on stuff to pretty it up. 

 

All the updates on the series 2 base model appeal to me, especially the black trimming.

 

I was hoping to get some feedback of what everyones thoughts were on which way they would go with this. There's a few options Im looking at and close to making a decision.

 

Thanks in advance 

Out of those 3 Bayside blue is a real nice "colour", and IMO classic, white and silver just blends in with every other car

You will probably find most will already have some basic mods like you already mentioned 

As for what series, buy the newest and best condition your budget allows

2 minutes ago, The Bogan said:

Out of those 3 Bayside blue is a real nice "colour", and IMO classic, white and silver just blends in with every other car

You will probably find most will already have some basic mods like you already mentioned 

As for what series, buy the newest and best condition your budget allows

Yes, bayside will always be a winner.

 

Do you see a value difference between 1999 vspec s1 & 2001 base s2 ? 

2 minutes ago, Duncan said:

Personally, I'd got the newer one. Particularly if you were going to swap out the vspec brakes and shocks anyway

I probably wouldn’t do the brakes but I would install new coilovers sure. 

Anyone else have any thoughts on if I should go 1999 VS1 or 2001 Base2 ? 
 

And could give me your thoughts if you believe the buying value on both would be about the same ? 

2 hours ago, MK80 said:

Anyone else have any thoughts on if I should go 1999 VS1 or 2001 Base2 ? 
 

And could give me your thoughts if you believe the buying value on both would be about the same ? 

It's swings and roundabouts. Doesn't matter that much. The earlier VSpec 1 has slightly better undercoating from the factory, the headlights still have the level adjustment motors, small touches like that. Series 2 base model gets slightly improved brake bias. Focus on condition. Only worry about VSpec vs base if you actually care about the bits that come with the VSpec like the front diffuser, rear diffuser, A-LSD, and slightly stiffer OEM suspension.

Ultimately it comes down to what u want.

you are the one that’s going to spend $200k + on a car. Why would it matter what other people’s opinions are unless you are just worried about future re sale or internet clout.

I would personally just be finding the best condition example within my budget.

When spending so much money on a classic JDM (or any car for that matter) I would think it’s in my best interest to consider resale value of specific variations of the same car. 
 

People’s thoughts and opinions is just that and is always interesting to get feedback. 
 

The budget covers possible equal condition on both of these models of which I believe could be of equal value, hence the question. 

11 hours ago, MK80 said:

When spending so much money on a classic JDM (or any car for that matter) I would think it’s in my best interest to consider resale value of specific variations of the same car. 
 

People’s thoughts and opinions is just that and is always interesting to get feedback. 
 

The budget covers possible equal condition on both of these models of which I believe could be of equal value, hence the question. 

I personally value the parts that a VSpec gets because I have no plans to actually modify things like the suspension or rear diff. The question you're asking is how many people actually value those parts. Judging by how often these cars have aftermarket diffs and suspension all that's left is two underbody covers basically. Value is relative. To some people the mechanical diff is actually preferable in the base model because it means no A-LSD errors or other nonsense to deal with when you rip out the factory A-LSD found in a VSpec.

I'm not in the market, but I would choose the newer base model over the older V-spec for the same money.

As Joshua says, there's little on the V-spec that would survive my need to piss off the A-LSD, and the various other upgrades that would happen. It pays to remember that a stock GTR, even in V-spec form, is not super exciting. They need mods to be proper fun to drive.

If the fun instead is in having an unmodified car with a particular type of badge, then I can't align with those sorts of priorities.

The ridiculous prices being applied to these cars are only a distraction. They're still the same dirty old Datto that they were in the 90s and early 00s. The prices can't last. All petrol engined cars that are not museum quality are doomed to become valueless. The hope of trying to keep one pristine but still driving it is a nonsense. It's a car. Designed to do one job. It should do that job, or be in a museum. There is no halfway house that makes sense.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...