Jump to content
SAU Community

Recommended Posts

Hey all, on my Subaru I noticed I have a whistling sound when from 60km an hour onwards, below that I don't hear it. I used to hear it from 80km onwards but now it's 60km. It does seem to get louder then plateau's, I thought maybe it's the wheel bearings but I got them replaced about 70,000km ago, unless the mechanic put cheap ones on. What would you guys lean towards it being? Also when going over small bumps and especially when I'm turning the wheel on bumps I can hear like a twitching sound I think from the rear passenger side, maybe the strut? 

I know the rear of the car itself has been squeaky probably since I bought it (separate issue), but I've never fixed it as I generally don't have people sitting in the back and it's not overly noticeable unless I go over bumps with people in the back or if I'm driving myself but turn into a carpark ramp to go up the parking.

On 11/07/2023 at 10:35 PM, GTSBoy said:

You seriously want us to attempt to diagnose odd sounds over the internet?

To be fair something like every second engine issue thread starts with a recording of odd noises happening in the engine bay, no? In that sense I'd say having a recording would be good for a start.

44 minutes ago, soviet_merlin said:

To be fair something like every second engine issue thread starts with a recording of odd noises happening in the engine bay, no? In that sense I'd say having a recording would be good for a start.

Yeah, but when it's happening at 60+ km/h, good luck trying to get a recording that we can hear anything over the wind roar.

On 11/07/2023 at 9:34 PM, silviaz said:

I thought maybe it's the wheel bearings but I got them replaced about 70,000km ago,

Could still be wheel bearings. Or a diff? Dunno if that's a whistle, probably more a whir.

Sounds like the rear is unrelated? Hard to diagnose anything with the amount of info though. YOu could get under the back and just check everything is tight ?

5 hours ago, PranK said:

Could still be wheel bearings. Or a diff? Dunno if that's a whistle, probably more a whir.

Sounds like the rear is unrelated? Hard to diagnose anything with the amount of info though. YOu could get under the back and just check everything is tight ?

Bearings got replaced (could have been cheap ones, though I am leaning towards it), will get it checked out one of these days. Doubt it's the diff, can't hear it on passenger side only driver side.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...