Jump to content
SAU Community

Recommended Posts

Thank you.

The wiring is okay, i double checked it with a Multimeter. The Sky goes out only in right curves and only if the fuel tank isn't full (the issue starts at about a half-full tank)

In Germany more r32 have this issue. First i thought i need a tank-in-tank solution to counteract the G-Load.

I think that, as GTSBoy said, it will relate to how the oump is mounted in the  cradle. Less likely but also possible the cradle is not firmly secured to the mount in the bottom of the tank and has come loose.

Either way you need to open the tank back up to check.

The main thing to check is that the pump's sock/inlet filter is lying flat right at the bottom of the cradle. Also check the the filter is properly attached to the pump and can't leak, that the pump is secure in the cradle (as the diameter is much smaller than stock), and that the return line from the fuel rail is properly connected so that fuel returns into the cradle not the main tank.

I still have surge with low fuel (under 1/4 tank) in long high g corners on the track, even though I use an in tank lift pump + external surge tank. These days there are better designed aftermarket alternatives if you can't get the standard setup to work OK, like https://frenchysperformancegarage.com/collections/nissan-skyline-r32gt-r/products/fpg-new-nissan-skyline-r32-gt-r-bnr32-in-tank-surge-tank-kit-track-edition-te-fits-c34-stagea-v3-fpg-085

10 hours ago, Stivo said:

The wiring is okay, i double checked it with a Multimeter.

I think you missed the point of what I said. You would need to be driving around a right-hand curve at the same time as measuring with the multimeter to prove this.

What I said was:

10 hours ago, GTSBoy said:

or you've fouled up the wiring so that it is shorting or going open circuit under that G load.

with emphasis added, for, you know, emphasis.

Yeah, I'm betting a combination of fuel pump is positioned higher then the factory pump and the filter/sock is shorter then the factory sock. 

Have a look at the frenchys performance garage hanger setup, they generally position the fuel pump nice and low so would be a good comparison for however you set your pump up.

  • 1 year later...

Hello again,

I just want to tell you that i found the reason why my bnr32 is going out in right corners.

I had my car tuned by a company and they fitted the Emu Classic and a new fuel pump in 2021.

I checked the loom, changed the walbro fuel pump with a Deatschwerks fuel pump. None of this helped.

Then I checked the fuel pressure and thought I was crazy. It was tuned with over 7 bar ( over 100psi) !!!

But why? So I checked the fuel return line and saw that it was closed.

That was probably also the reason why the tuner replaced the fuel pump, but he tuned the Emu with the 7 bar 🫣

The map in the emu has now been changed and evertyhing is fine.

IMG-20240924-WA0009.jpg

IMG-20240924-WA0006.jpg

Edited by Stivo
  • Like 5
  • 2 weeks later...
On 10/26/2024 at 12:06 PM, Stivo said:

Hello again,

I just want to tell you that i found the reason why my bnr32 is going out in right corners.

I had my car tuned by a company and they fitted the Emu Classic and a new fuel pump in 2021.

I checked the loom, changed the walbro fuel pump with a Deatschwerks fuel pump. None of this helped.

Then I checked the fuel pressure and thought I was crazy. It was tuned with over 7 bar ( over 100psi) !!!

But why? So I checked the fuel return line and saw that it was closed.

That was probably also the reason why the tuner replaced the fuel pump, but he tuned the Emu with the 7 bar 🫣

The map in the emu has now been changed and evertyhing is fine.

IMG-20240924-WA0009.jpg

IMG-20240924-WA0006.jpg

It's my experience that when cars get old enough every failure starts to be unique and surprising like this. They must be reading Anna Karenina or something. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...