Jump to content
SAU Community

Recommended Posts

14 minutes ago, Murray_Calavera said:

Ah ok. It would be a lot more accurate to simply say, the car has not been tuned. 

Blowing black smoke on boost is so crazy far from any state of 'tune' that I would not even call it poorly tuned. 

Do you know where the ECU lives? It takes about 10 seconds to access the ECU and we could solve this mystery.

I'm just relaying what my mechanic told me. In my other post i talked about sonething similiar but some mechanics said to me that black smoke "can" be normal. But I'm out of my depth here.

Ecu is usually under the driver footwell? Or ive seen it sometimes on passenger footwells. Couldn't see it either.

If it hasn't been tuned, is it even possible for a car to run well (meaning it feels normal when driving, not thinking about A/F ratios and such) if it hasn't been tuned on a aftermarket ecu?

Either way needs a tune, I'll leave it to the professionals.

 

17 minutes ago, silviaz said:

passenger footwells

Yep, see attached 

19 minutes ago, silviaz said:

If it hasn't been tuned, is it even possible for a car to run well (meaning it feels normal when driving, not thinking about A/F ratios and such) if it hasn't been tuned on a aftermarket ecu?

Yep. For example, you buy a Haltech ECU and upload the Haltech base map, the car will start and feel ok while driving however will have had 0 tuning done (provided the car is essentially stock, the base map will line up). 

If you get a few seconds spare, please remove the passenger kick panel and solve this mystery for me lol. 

R32 ECU Mounting 3.jpg

  • Like 1
9 minutes ago, Murray_Calavera said:

Yep, see attached 

Yep. For example, you buy a Haltech ECU and upload the Haltech base map, the car will start and feel ok while driving however will have had 0 tuning done (provided the car is essentially stock, the base map will line up). 

If you get a few seconds spare, please remove the passenger kick panel and solve this mystery for me lol. 

R32 ECU Mounting 3.jpg

Will do. 

  • Like 1
14 hours ago, Murray_Calavera said:

Yep, see attached 

Yep. For example, you buy a Haltech ECU and upload the Haltech base map, the car will start and feel ok while driving however will have had 0 tuning done (provided the car is essentially stock, the base map will line up). 

If you get a few seconds spare, please remove the passenger kick panel and solve this mystery for me lol. 

R32 ECU Mounting 3.jpg

To add to this.

Apart from some cranky cold starts, the tune that was on my ECU years ago for a relatively stock RB25, was happy to run and boost hard my RB30DET, with a TD07S on it.

It was very out of tune, but would run and drive "like normal". Except AFRs and timing weren't right.

  • Like 1
On 08/08/2024 at 2:58 PM, silviaz said:

I noticed my oil on my rb25 stays gold for about 3,500km roughly. Then goes light brown after that. Probably around 4,500 mark it goes dark brown (this is me driving normally with no / minimal pulls as i blow black smoke when i boost) (when I drain the oil it's black at 5,000 no metal shavings though in the filter or oil)

I noticed now that it's been under 3,000km and it's dark brown. I think it's because I've been doing a few pulls more than usual (pulls means, in first gear going up to 5000-7000 rpm)

My oil doesn't smell like fuel at all, and isn't causing me any issues but I don't want to get bearing wear (yes I'll be getting my car tuned soon to)

I don't know if it's just me or if my oil is a bit thinner (I'm comparing brand new oil to oil that has roughly 2,500km from memory so might not be a good comparision.

haha. I change mine every 1500-2000ks :D

 

4 hours ago, MBS206 said:

To add to this.

Apart from some cranky cold starts, the tune that was on my ECU years ago for a relatively stock RB25, was happy to run and boost hard my RB30DET, with a TD07S on it.

It was very out of tune, but would run and drive "like normal". Except AFRs and timing weren't right.

When you say timing wasn't right are you referring to the timing belt being a tooth off? I think my AFR's are f**ked but will find out soon.

55 minutes ago, silviaz said:

When you say timing wasn't right are you referring to the timing belt being a tooth off?

No, he was saying that the ignition timing (which is what people mean when talking about "timing" wrt a tune) was not correct. Meaning that for any given load cell it could have been too retarded (and thus giving away power) or too advanced (and thus being close to or beyond the point of causing knock, and thus dangerous, and thus silly to drive around while using the engine in such a away as to access that load site).

We know your AFRs are f**ked. You're the one who told us it is blowing black smoke.

  • Like 1
54 minutes ago, silviaz said:

When you say timing wasn't right are you referring to the timing belt being a tooth off? I think my AFR's are f**ked but will find out soon.

The message here essentially is, your fuel mixture and ignition timing can be crazy far away from being optimal however the car feels fine to drive. He isn't talking about the physical timing belt when talking about timing not being correct. 

  • Like 2
6 hours ago, silviaz said:

When you say timing wasn't right are you referring to the timing belt being a tooth off? I think my AFR's are f**ked but will find out soon.

No, the tune was f**ked.
Much like your tune is.

It could end catastrophically for your engine. Either exploding engine, decimated bearings, or just burning the internals of the engine up.

STOP DRIVING THE CAR AND GET IT TUNED / LOOKED AT BY SOMEONE WHO KNOWS WHAT THEY'RE DOING!

  • Like 1
5 hours ago, GTSBoy said:

No, he was saying that the ignition timing (which is what people mean when talking about "timing" wrt a tune) was not correct. Meaning that for any given load cell it could have been too retarded (and thus giving away power) or too advanced (and thus being close to or beyond the point of causing knock, and thus dangerous, and thus silly to drive around while using the engine in such a away as to access that load site).

We know your AFRs are f**ked. You're the one who told us it is blowing black smoke.

Ah right. I guess the CAS is also related to that?

5 hours ago, Murray_Calavera said:

The message here essentially is, your fuel mixture and ignition timing can be crazy far away from being optimal however the car feels fine to drive. He isn't talking about the physical timing belt when talking about timing not being correct. 

Ah ok, makes sense.

18 minutes ago, MBS206 said:

No, the tune was f**ked.
Much like your tune is.

It could end catastrophically for your engine. Either exploding engine, decimated bearings, or just burning the internals of the engine up.

STOP DRIVING THE CAR AND GET IT TUNED / LOOKED AT BY SOMEONE WHO KNOWS WHAT THEY'RE DOING!

I will.

1 hour ago, silviaz said:

Ah right. I guess the CAS is also related to that?

No, on the basis that the CAS shouldn't be f**ked with, and if it is, it should be set back to the correct base timing with a timing light immediately.

  • Like 1
1 hour ago, silviaz said:

Ah right. I guess the CAS is also related to that?

No.

The tune is f**ked. The numbers you put in the computer, aren't right.

 

If you keep driving the car, then it seems you want to take even longer, and spend even more money fixing a broken motor.

  • Like 1
3 hours ago, Alex001 said:

how come someone says, this isn’t a car that should be out on the road right now.

Like the others mentioned, you could do more damage because you're driving a car that isn't running right. It's like lifting at the gym when you've already injured yourself. You're just going to injure yourself more if you keep going, instead you should fix the issue (heal the muscle) before continuing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...