Jump to content
SAU Community

Recommended Posts

I had my car for over 10 years and done around few thousand miles but never changed the oil. thinking of changing it.

 

what brand and viscocity would you put in ? people seem to use redline shockproof in the diff

 

on  contraty seen others using atf dexron 2 or 3 so wanted to check. is it 1 liter?

Edited by drifter17a
Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/
Share on other sites

31 minutes ago, drifter17a said:

people seem to use redline shockproof in the diff

No. Well, some people "seem to use redline shockproof in the diff". Most do not. I would only contemplate it if you have badly worn CW&P gears.

And no. No-one in their right mind has ever put ATF into a diff.

Any normal diff/gear oil of the right viscosity will do. Whatever takes your fancy. Castrol, Nulon, Penrite, Redline MT range. Whatever. It's just gears.

75W-90 or 80W-90 is typical. I think that GL-5 is hard to avoid these days, although I think that a GL-4 is probably preferred, given the vintage of the equipment. At least Redline offer a number of GL-4 oils.

If you have a clutch type LSD instead of the VLSD, then of course you need a proper LSD oil. Anything from any of the same names above.

If you have a helical LSD, then it does not require LSD oil, and the recco is the same as for the VLSD. You don't want the LSD friction modifiers in the oil for a non-clutch type LSD if you can avoid it.

 

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995189
Share on other sites

I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself

 

in meantime thought I change the diff oil hence post here. So any 75-90?

 

i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995191
Share on other sites

99.9% of them are viscous diffs. The 0.01% are helicals. They were only option-able in the series 2, as well.

I have redline heavy shockproof in my helical. It seems... fine? I don't think anyone is ever going to know until something really breaks and at that point I'm not sure anyone will blame the oil. I just chose it because it's extremely heavy duty and my car will see not-road-legal duty for it. I've also had sadness with various diff oils in the past sweating out everywhere and/or other 'fun' things, with clutch diffs.

Given you have a 1.5 way on the shelf, I'd not even bother with the diff in the car and just get to tinkering with it. I would spend the $90 on oil toward the labor of someone else putting the diff in if time poor even lol.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995192
Share on other sites

1 hour ago, drifter17a said:

I believe mine is helical and not clutch type. During drifting one wheel was spining as if it was open diff so bought kazz 1.5 way and has sat on my shelf for the past 5 years as I want to learn shiming process and do it myself

 

in meantime thought I change the diff oil hence post here. So any 75-90?

 

i am pretty sure r34 are helical not clutch lsd as standard . That is gtt ones

75W90 GL5 is fine. If you aren't sure about the type get one with LSD additive. 

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995194
Share on other sites

2 hours ago, drifter17a said:

believe mine is helical and not clutch type.

Unlikely, as per Greg's post.

2 hours ago, drifter17a said:

During drifting one wheel was spining as if it was open diff

This is not helical diff behaviour unless one wheel is up off the ground.

2 hours ago, drifter17a said:

I want to learn shiming process and do it myself

Shimming what? You don't "shim" a mechanical LSD. Probably not in the sense that you have heard of people "shimming" a diff. And the process that Nissan f**kwits call "shimming" a diff involves super-preloading a VLSD cartridge against the side of the diff to create a friction/wear point (in a place that it wasn't supposed to have one) to make the sloppy, useless, viscous diff into a hybrid viscous/mech abortion.

In case it isn't clear, I consider the process to be stupid.

2 hours ago, drifter17a said:

bought kazz 1.5 way and has sat on my shelf for the past 5 years

Nike.

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995199
Share on other sites

7 minutes ago, GTSBoy said:

This is not helical diff behaviour unless one wheel is up off the ground.

Sadly I can confirm if you are actually seeking to drift, you will quite easily spin up one wheel. Even if you're going in a straight line. I am not entirely sure of the metrics/terminology here but there's only a certain amount that the helical will actually spin both wheels. I've seen it on video with my own car where two lines of smoke switch over to just one after you really get in to it.

Unlike with a clutch diff where you can keep your foot planted until the car regains grip, in my experience with the helical you want to be utilizing traction control allowing LIMITED slip or lifting (partially) when you start to spin up both tyres with a Nissan helical.

Which makes them pretty sub optimal for drifting duty. That said... this is probably a helical on numbers alone. Just put the Kazz in :D

Link to comment
https://www.sau.com.au/forums/topic/485948-r34-diff-oil/#findComment-7995201
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
    • -10 is plenty for running to an oil cooler. When you look at oil feeds, like power steering feeds, they're much smaller, and then just a larger hose size to move volume in less pressure. No need for -12. Even on the race cars, like Duncans, and endurance cars, most of them are all running -10 and everything works perfectly fine, temps are under control, and there's no restrictions.
    • Update: O2 sensor in my downpipe turned out to be faulty when I plugged in to the Haltech software. Was getting a "open circuit" warning. Tons of carbon buildup on it, probably from when I was running rich for a while before getting it corrected. Replaced with new unit and test drove again. The shuffle still happens, albeit far less now. I am not able to replicate it as reliably and it no longer happens at the same RPM levels as before. The only time I was able to hear it was in 5th going uphill and another time in 5th where there was no noticeable incline but applying more throttle first sped it up and then cleared it. Then once in 4th when I slightly lifted the throttle going over a bump but cleared right after. My understanding is that with the O2 sensor out, the ECU relies entirely on the MAP tune and isn't able to make its small adjustments based on the sensors reading. All in all, a big improvement, though not the silver bullet. Will try validating the actuators are set up correctly, and potentially setting up shop time to tune the boost controller on closed loop rather than the open loop it is set to now. Think if it's set up on closed loop to take the O2 reading, that should deal with these last bits. Will try to update again as I go. 
×
×
  • Create New...