Jump to content
SAU Community

Recommended Posts

Trying to find the plastic under cover for an 04' Forester X. The main under cover that covers most of the front of the vehicle under the engine. This has turned out to be a crazy experience. Normally I can find parts for vehicles, if I have the correct info, no problem. But not this! The Forester is a non-turbo btw. In a Forester parts catalog, for model years 03'-06', it shows part# 56410SA070 as being the correct part. So I go to the local Subaru dealership's website to order it. I type in the part#, hit search and there it is, the under cover. "DOES THIS PART FIT YOUR VEHICLE?" I type in my VIN# and sure enough, "This Part Does Not Fit Your Vehicle. See Similar Parts For Your Vehicle." I click on that and part# 56410SA000 comes up. Looks absolutely nothing like the previous part. Not even close. So I go to a different Subaru dealer website and put in that 2nd part# (56410SA000) and "This Part Has Been Replaced By" 56410SA070, which is the first part I looked up. I thought OK, makes sense. They replaced the strange looking part, with the one I looked up first, so I add it to the cart. "Does This Part Fit Your Vehicle?" I type in my VIN#, and sure enough, "This Part Does Not Fit Your Vehicle." I've basically been doing this with various parts suppliers and dealerships, for the past 4 hours! Does anyone know what the hell is going on?? Thanks in advance! 

 
1 hour ago, GTSBoy said:

Strong first post.

On a Skyline-centric forum.

Have you considered actually going out into the world, visiting the actual dealership, and asking the parts guy over the counter? Or at least just call them up on the phone?

So am I not supposed to post on here about Subarus?  As far as going to a dealership, they were closed today, and will be closed at least the next 2 or 3 days. I wanted to get one ordered and never thought I would have such a problem. Pretty ridiculous if you ask me!

41 minutes ago, Murray_Calavera said:

Seeing as it's an 04 model, I would be hitting up wreckers first.

Unfortunately, we don't have any salvage yards around here with any Foresters that are around 2004. I'll try them again next Wednesday or Thursday when they open.

11 minutes ago, GTSBoy said:

'sif not 'Murica.

Called it! 

6 minutes ago, Apache23 said:

Oklahoma City.

Just wondering, why did you pick this site to ask for help and not like a local facebook group for Subis? 

10 minutes ago, Murray_Calavera said:

Called it! 

Just wondering, why did you pick this site to ask for help and not like a local facebook group for Subis? 

Good question. I thought there might be some knowledgeable people on here. Apparently, I thought wrong.

FWIW, if the question was about the undertray for an HY51 Fuga / V37 Skyline I do actually have some knowledge....having ripped mine off crossing a weir that was deeper than I expected

On 17/02/2025 at 2:50 PM, Apache23 said:

Good question. I thought there might be some knowledgeable people on here. Apparently, I thought wrong.

Cut back on the attitude champ, no one is obligated to help you. The chances of Forester owners on here are quite low, considering this forum is called Skylines Australia.

https://www.subarupartsdeal.com/parts/subaru-under-cover-front~56410sa000.html

^ that picture looks wrong, because if you see the diagram, 56410SA070 looks correct.

You can always check where the mounting holes are on your car, and compare them to the pictures.

  • 1 month later...
On 2/18/2025 at 6:40 AM, niZmO_Man said:

Cut back on the attitude champ, no one is obligated to help you. The chances of Forester owners on here are quite low, considering this forum is called Skylines Australia.

https://www.subarupartsdeal.com/parts/subaru-under-cover-front~56410sa000.html

^ that picture looks wrong, because if you see the diagram, 56410SA070 looks correct.

You can always check where the mounting holes are on your car, and compare them to the pictures.

I'm not someone who has the ability to cut back on my attitude, if someone f**ks with me. If no one f**ks with me, there will always be a complete lack of attitude, coming from me. I found this website after searching for the under cover I mentioned above. I had no idea that SAU.com.au was Skylines Australia. For all I knew, it meant Subaru Autos United or some shit! I got an attitude from the first person to comment. And Aussies aren't the only ones allowed to have attitudes btw. I was born and raised on the South side of Chicago, where attitudes were invented. Don't believe me? Then you should visit the South side some time and find out. Fyi, I wouldn't venture too far outside your motel at night. Probably not a good idea to go anywhere in the morning or afternoon either. And never answer the door, or look out the window. Wedge a table or dresser against the door and leave it there at all times. Also, put 2 wet towels against the bottom of the door, and keep the lights off at night. Other than all that, you should be fine. If you make it out to your rental car. Cheers!

4 minutes ago, Apache23 said:

I'm not someone who has the ability to cut back on my attitude, if someone f**ks with me. If no one f**ks with me, there will always be a complete lack of attitude, coming from me. I found this website after searching for the under cover I mentioned above. I had no idea that SAU.com.au was Skylines Australia. For all I knew, it meant Subaru Autos United or some shit! I got an attitude from the first person to comment. And Aussies aren't the only ones allowed to have attitudes btw. I was born and raised on the South side of Chicago, where attitudes were invented. Don't believe me? Then you should visit the South side some time and find out. Fyi, I wouldn't venture too far outside your motel at night. Probably not a good idea to go anywhere in the morning or afternoon either. And never answer the door, or look out the window. Wedge a table or dresser against the door and leave it there at all times. Also, put 2 wet towels against the bottom of the door, and keep the lights off at night. Other than all that, you should be fine. If you make it out to your rental car. Cheers!

What a f**king weener.

I have worked in Gary, IN. At the time there were more gun deaths each night there than almost anywhere else in the world. Still not a reason to be afraid. 95% of people from your part of the world only have 3 teeth left from when you were addicted to meth, and now you're perpetually wrecked by Fentanyl.

The only saving grace is that most of you didn't vote for Trumpler. Speaking of which, I'm off to the oval office right now. Got to relieve my bowels.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...