Jump to content
SAU Community

Recommended Posts

Sounds like you guys had a great time out there, and well done for coming top of the class :P

Now....I'll be down there from Monday until end of October, so I expect you all to

1) Organise a track day at each Vic track before then

2) Let me know where I can hire a cheap mx5/mrs/mgf etc etc

:(

  • Replies 218
  • Created
  • Last Reply

Top Posters In This Topic

Adz,

You have done very well mate, congrats.

I was following you for a while and you were driving pretty smooth.

Ferni,

To answer your question from the other thread, my oil temp was 100 degrees. Do not worry too much about the guides around the cooler core, but get some vents happenning in your guard lining to circulate the air.

Chris were having highish oil temps as well and he drilled some holes on the lining as a temporary fix. I forgot to ask him how much of a difference it made, but he will let us know when he signs in.

My corner speeds were comparatively lower than everyone else, which fully explains the slower lap times. It was probably the mixture of driver and rubber and there is a lot improve on both counts.

Snwoman,

That is one hot pic, but Geoff is definitely sucking it in. :P

Cheers mate, you were pretty good for street tyres too. Did you like my drift style show on corner 5? Didn't expect to see you facing towards me when I came round on the next lap! Thats what you get for trying to keep up with a GT-40 on slicks! :P Mind you later on Semi's I had a moment, managed to floor it and bring it round though.

Did you like my drift style show on corner 5? Didn't expect to see you facing towards me when I came round on the next lap! Thats what you get for trying to keep up with a GT-40 on slicks!

Did you mean turn 6...? Not much of a drift action was happenning, you were mostly spinning them on a straight line. A lot of smoke though, the girls thought someone blew up. :D

You were too slow anyway, so i took you over. :D

Snowman,

You are soft and sexy and smell tough with a whiff of petrol scent. :bahaha:

Chris told me that his temps dropped from about 120 on sat to about 110 on sun with the holes in the wheel guard inner, and he was driving harder on the sun.

Bingo Andrew, there is the next mod you have to perform before the next track day.

If you are eager enough, you can manufacture some sort of a guide around the core as well. Here is what my HKS one look like :

guide1.jpg

guide2.jpg

guide3.jpg

It's in two pieces and bolted together.

guide4.jpg

ahhh i didn't realise there were 2 peices, i was just thinking it was the left (inside) peice... shouldn't be to hard to measure up and get made, but first i would like to do what you have done with the gtst guard inner

DSCF5432.JPG

...and there she sat all day, all dressed up and no date :(

DSCF5431.JPG

The boys discuss the Wallabies disappointing Sat night performance :(

I was happy to throw the tyres on everyones cars, as the only thing i could really salvage from the weekend was seeing the big smiles of others as they jumped out of their cars :) ...its the only thing that kept me going. Does Geoff ever stop smiling :D

Forget lap times and sticky rubber, who didnt have an off? You should be ashamed :flamed: If you dont spin you aint try'n :D ...

Had a couple of big moments in the wet with the tail wagging the dog, but I caught them...kinda. No offs or full spins. I'm smiling just thinking about it :)

The ability of the track rubber allows so much more confidence and suddenly the race cars were not pulling anything in the turns, so were slaughtered on the straights.

Talked to the guy with the GT Falcon after the event and he'd had a good day too but was a bit put out by getting done by skylines. Quote "And how would sir like his ass handed to him today"

Does Geoff ever stop smiling  

Troy - check out the photo of Andrew, Geoff and Emre (posted above) - i dont see much of a smile there - although it must be the only minute of the whole weekend that he wasn't smiling.

What can we say - Geoff is just a happy guy

...and more.

Emre - thanks for the info on the oil cooler. Was at least 10-15 degrees cooler with those holes I made.

Andrew - i'm going to have to sabotage your car if I cant beat you soon....

Troy - get your biatch back on the road. I wanna see that Geoff style grin light up on your face.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...