Jump to content
SAU Community

Recommended Posts

had the stagea on the dyno with the 3076 .82 on.

everythn standard besides

exhaust 3 inch

fmic

pod

nistune

made a nice 240rwkw on 11psi.

cant wait for injectors pump and afm. im planing to run 17 to 18 psi and should make the 300 to 320kw mark. il let yas now how i go once i finish the mods.

How lean is it?

I am only getting a bit more on 15psi, 245-250rwkw

How lean is it?

I am only getting a bit more on 15psi, 245-250rwkw

i lookt at the afr and they seem fairly stable. i told the guy i got tuning it that its gonna take a beating so i want it safe. so hes done what he can with the standard injectors. il see if i can get a couple of print outs and post em up for ya. injectors are running 90% duty. i was shockt it made over 200kw with em.

  • 4 months later...

its pork hunt drifting here im on mates user name cause i cant remeber my pass.

i had rbpower on the dyno again after putting new coil packs in and upping boost from 12 to 14 lbs.

the cars now making 262rwkw with

garret 3076

3 inch custom zorst

pod

fmic

nistune

just put a z32 afm on this arvo and gona lift boost to 16psi if standard injectors let me. they only seem to be running 70 to 80% duty at moment. il update results if i get another tune on sat.

Had my car dynoed at Edge Motorworks by Cihan today...well its the 2nd time. Last week I had my LPG and Petrol tune. Today was E85/Flex fuel tune.

Mods - Note - "Custom" = Scotty's fabrication :worship:

Custom suction pipe

Custom dump/front pipe to Fujitsubo Legalis

Stage 1 hi flow @ 17(?) psi

HDI Intercooler

Blitz SUS Power air filter

Turbosmart boost controller

Greddy Emanage Ultimate

trans cooler

RVO Auto stage 2 shift kit (valve body upgrade/line pressure increased)

610 Deka injectors

Walbro GSS342

JTG Liquid Gas Injection system

Results:

98RON: 247awkw, ~800NM

LPG: 250awkw, ~850 NM

E85: 270 awkw, ~950NM

didn't get dyno sheets as printer not working!!

this is a "screenshot" from last week:

Pretty happy with the results...next step is looking at an EBC and modified actuator to hold boost

post-75595-0-01687100-1300539691_thumb.jpg

Very nice mate, and I am back to the stock turbo. >_<

Glad you like my old setup. How does it feel? :thumbsup:

That pic is terrible, I will see if I can get a print/photo of your 270kw run later today.

Its good!!! Its nuts when it hits 3k+ rpm

Yeah, see if u can get something. He would've saved it right? I dunno...Cihan was in a real hurry to leave...had issues getting my car OFF the dyno LOL...and those straps...I think you better make some miracles with those bits ur welding onto his dyno!

Had my car dynoed at Edge Motorworks by Cihan today...well its the 2nd time. Last week I had my LPG and Petrol tune. Today was E85/Flex fuel tune.

Mods - Note - "Custom" = Scotty's fabrication :worship:

Custom suction pipe

Custom dump/front pipe to Fujitsubo Legalis

Stage 1 hi flow @ 17(?) psi

HDI Intercooler

Blitz SUS Power air filter

Turbosmart boost controller

Greddy Emanage Ultimate

trans cooler

RVO Auto stage 2 shift kit (valve body upgrade/line pressure increased)

610 Deka injectors

Walbro GSS342

JTG Liquid Gas Injection system

Results:

98RON: 247awkw, ~800NM

LPG: 250awkw, ~850 NM

E85: 270 awkw, ~950NM

didn't get dyno sheets as printer not working!!

this is a "screenshot" from last week:

Pretty happy with the results...next step is looking at an EBC and modified actuator to hold boost

NICE!!!!......stick up the e85 run when you get it.....what boost? you'll like the modified actuator.....bit of a gain for yah....have you changed you plugs yet?

Edited by Jetwreck

Looking at the dyno graph, does anyone know what causes tha power dip at 3500rpm??

I have a stock M35 and can feel a very noticeable loss in power at 3500rpm, which is also in the dyno result above?

Also, what is the actuator mod mentioned above?

At a rough guess, I'd say it was the Torque Converter locking up in the Auto gearbox.

I think I've seen it mentioned in other dyno graphs by people with Autos, but I'm happy to be wrong if someone has a better explanation.

Looking at the dyno graph, does anyone know what causes tha power dip at 3500rpm??

I have a stock M35 and can feel a very noticeable loss in power at 3500rpm, which is also in the dyno result above?

Also, what is the actuator mod mentioned above?

yeh what PN-Mad said.

The modified actuator is done but putting a bigger spring on the outside....sort of works like a preload.

Works good too, brings it all on heaps earlier, just like the grub screw in the BOV. :thumbsup:

I just got back from tuning after fitting the stock turbo, it was only a temporary tune as Garrett is out of GTX turbo's at the moment. Running ethanol and pushing 1.2 bar the stocker made 225awkw and 850nm. I might just stick with this one for a while... :cheers:

This is a good representation of what a stock turbo (17psi) and a stage 2 (20psi) can do on ethanol, overlaid on the same graph. Cihan was very impressed with the stockers capabilities.

post-63525-0-49536000-1300611298_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...