Jump to content
SAU Community

Recommended Posts

  • 3 months later...
  • 1 month later...
  • 2 months later...

Hi guys,

When I imported our 250t RS4 I needed new shocks all round so stupidly bought the cheaper BC set instead of the BR. Now they are stuffed and our use for the car has changed a little. I wonder if anyone knows whether you can fit the RX suspension to the 250t rs4 and lift the ride height? Anyone have any experience importing stock suspension direct from Nissan Japan? Or know if you can do that via local Nissan dealers?

  • 3 months later...
2 minutes ago, Long and low said:

I have a set of BC gold adjustables to go in. Seems pretty straight forward to put in. I'll be doing it in my garage on my own. 

Thanks for that. I'm only doing the springs so expect to need a spring compressor. Bought them after a couple too many, now have to work out how to do it ??

If the fronts are anything like a PNM35 ('04+) then you better have hands like a Geisha girl to get out one of the left-side strut top mount bolts. It sits under an A/C pipe so expect to use some inappropriate language.

Other than that, pretty simple stuff. I had to do the rears but from pictures I've seen it'll be easier than the front.

The stock springs are pretty stout and ate one of my spring compressors because I didn't get enough coils in between the jaws, so try to get as many coils as you can between them.

47 minutes ago, Hertz Donut said:

If the fronts are anything like a PNM35 ('04+) then you better have hands like a Geisha girl to get out one of the left-side strut top mount bolts. It sits under an A/C pipe so expect to use some inappropriate language.

Other than that, pretty simple stuff. I had to do the rears but from pictures I've seen it'll be easier than the front.

The stock springs are pretty stout and ate one of my spring compressors because I didn't get enough coils in between the jaws, so try to get as many coils as you can between them.

Thanx for that.

  • 2 years later...

I have a rear upper ball joint with play and want to replace the whole arm instead of paying $500 for new genuine Nissan part will the arm in a 2005 rx350 bolt straight into the 2004 ar-x Four model as well as the lower control arms. Been measuring and comparing photos still stumped the shocks fit perfectly everything seems to match up but the fact it's rwd has me 2nd guessing does anyone know?

7 hours ago, INTHEKNOW said:

I have a rear upper ball joint with play and want to replace the whole arm instead of paying $500 for new genuine Nissan part will the arm in a 2005 rx350 bolt straight into the 2004 ar-x Four model as well as the lower control arms. Been measuring and comparing photos still stumped the shocks fit perfectly everything seems to match up but the fact it's rwd has me 2nd guessing does anyone know?

Have a look here it will tell you the part numbers and you can see if they match. 

https://nissan.epc-data.com/stagea/

 

  • Like 1
  • 3 years later...

Are people still active on here? Never used this site before so forgive me if I’m going about it the wrong way. 
 

wondering if anybody else has encountered issues with rim to rear suspension clearance, and has any remedies or ways around it that don’t involve beating the guards or smaller width rims. 
 

picture attached (is terrible I know) is of backside of rim barrel and coil over, can basically just fit a finger in between, which is fine on anything that is flat. But anything where the front and rear are hitting opposing angles the rims rub on the coilovers which is seriously unpleasant. Can’t run any less camber or the tyre rubs on the inner guard to much, and don’t really want to lift it up high enough to get more clearance off the coilovers 

 

appreciate any pointers cheers! 

IMG_0467.jpeg

IMG_0468.jpeg

IMG_0469.jpeg

IMG_0470.jpeg

23 hours ago, RBW49N said:

Is it an rs4 or an rs4s?

tou can fit an S14/5 rear subframe and suitable driveshafts if it is a factory auto and it will give more clearance

 

Rwd, factory auto, would that alter where the wheels sit? Track width etc or just where suspension bolts up? 

2 minutes ago, Yeevez said:

Rwd, factory auto, would that alter where the wheels sit? Track width etc or just where suspension bolts up? 

It will alter the track of the car and enable you to run less camber without hitting the outer guard and give the coil over clearance 

6 minutes ago, Yeevez said:

19x9 +30 I think in the back, not to aggressive really 

weird, I have standard r34 GTR wheels (18x9 +30) on my factory auto and they fit perfect inside and out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
×
×
  • Create New...