Jump to content
SAU Community

Recommended Posts

My wife got spotted at the Art Gallery today. A nice gentleman who drives an Atessa Bluebird came in to see who owned the Stag. His son apparently has just? bought a Stagea. Who are the mystery people.

So yesterday was rather eventful.

Spotted the same silver m35 on the same road that i mentioned a few posts back. Last night i saw a white m35 with aero kit on the m1 heading north (beleive he is a member on here) and my mates spotted another white m35 on isle of capri last night. So thats 3 m35s in 1 day + mine! Go the gold coast

Edited by euroequip

Spotted a blue M35 RS with ARX wheels, lowered and an exhaust on Warringah road, near the bridge. If you're on here, it was me that pulled up next to you in the blue fiat.

Edited by zei20l
Spotted Bis-e Bee at Kings Langley shops. Nearly ran me over so maybe he spotted me too.... :P

I was home sick from memory on the date you mention, had a really nice gastro bug happening so left Tuggerah early and drove back to Kings Langley to get some drugs from the chemist. Chances are i didn't spot you, though I remember someone smiling at me lol I'm just anti-social in my old age so it's lucky I didn't run you over eh :)

yeh he cannot see over the dash :D

Now now, that was completely called for.... d'oh! :( love ya work matey.

Yesterday at Narre Dyno night ,Grey S1 with Dayz front lip(Saw it at bunnings,couple oftimes)and white M35 just passed ....

That was me, White M35. I hung around for a while but only saw crappy fords and holdens running. I was there with my kids so had to leave early. Didn't see any other stags tho.

That was me, White M35. I hung around for a while but only saw crappy fords and holdens running. I was there with my kids so had to leave early. Didn't see any other stags tho.

Mine was at the end of the road,and the S1 was 50 mts. from the dyno place ,on the grass...saw you passing while i was talking with the owner of a black GTR...could be good to talk with you...

Spotted yellow and carbon dayz series two on botany road at mascot this afternoon, it was turning towards general holmes drive, beeped as i drove past but i don't think i was noticed, either way its a very nice stag.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...