Jump to content
SAU Community

Recommended Posts

Got beeped at by another Stagea owner as i was driving out of nerang towards the highway onramp this afternoon.

I totally didn't see you until you beeped. I was too busy enjoying the car as it's been 3 weeks since it's last been on the road.

Jez

Spotted a silver Axis on GWH at Blaxland last night around 6.25pm going east under the pedestrian bridge to the railway. I was crossing the road back to my car. It stopped at the lights but I couldn't get in my car quick enough to catch up. Female driver. I first didn't think it was a Stagea coming along the road. I was standing on the median strip but as it got closer realised it was a newer than mine.

Spotted a white s1 autec with a SAU sticker on the back on lower north east rd

Then about 3:15 saw a s2 with a dolphin front and nice chromies as we left HJ's -exchanged waves and flashes

Got beeped at by another Stagea owner as i was driving out of nerang towards the highway onramp this afternoon.

I totally didn't see you until you beeped. I was too busy enjoying the car as it's been 3 weeks since it's last been on the road.

Jez

Do you work in Nerang oposite the Pub???

Spotted a white RS4 on the Gateway Motorway just North of Nudgee, Brisbane. I think the plates were SSO22 or something like that. Pretty sure I've seen them before. Gave you a wave. I couldn't see you because your tint was so dark..

Do you work in Nerang oposite the Pub???

Nah. I was just coming back from my parents, out Tallai area.

I live up brisbane way and work @ coolangatta/tweed

Spotted a White RSFOUR-S in a hurry on the M1. Caught up to give a wave and backed off to safe town. Is that your normal highway speed ??? lol

I forgot to mention I saw a wine red M35 ARX parked in Church Street, Parramatta on Wednesday arvo roughly around 2pm, near the corner where the big Holden dealership used to be (either Lansdowne Street or Early Street, can't remember exactly).

passed a black series 2 on O'Sullivans Beach Rd at around 4:30 today. I only just noticed you at the last minute because I was too focused on the under cover cop that had been following me. I chucked out a little wave but you probably didn't see it

Edited by Cheddar

black S2 in my street.... went out and chatted with the new owner of Aaron from import monster's ride.... Nice to meet you Brendan, and hope to see you on the cruise on next sunday

Went out tonight to my cousins 21st at a pub out east. Spotted this in the carpark and had to park next to it.

The other half and my mother didn't appreciate having to walk a mile to the door when there were spots right out front, but hey, it was called for :whistling:.

Unfortunately it was still there when I left so chances are the owner wont know I was there. If the owners on here, thats a sweet looking ride!! I'd be keen to know what suspension your running as the stance on the back looked sweet as.

IMAG0120noplates.jpg

mine on the left.

Edited by comieodor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys my 94 r33 gtst fuel pump has gone out. I have a walbro 525 ready to go in but am unsure if I need to upgrade the fuel tank bulk heads? Ive heard that others have issues with the stock wiring melting... Ive seen alot of people recommend this: https://frenchysperformancegarage.com/products/fpg-nissan-skyline-r33-r34-silvia-s14-s15-billet-fuel-tank-bulkhead-hat-top-an6-with-high-current-connector-apex-2-8-delphi-fpg-100?variant=42873255198898 My current pump that stopped working is aftermarket but I had no relay mod or upgraded connectors. Need some advice please. TIA
    • It’s new. It’s the cd009. I did take the transmission apart to mill down the bellhousing and had both housings come off the gears so wondering is something isn’t in right. I am running redline. I can get it in gear running too but it’s just not easier and it’s almost like 2, 4, 6, and reverse all the back gears aren’t happy going in
    • I’ll remember that as a last choice. It’s brand new
    • Got keys and did a walk around the yard planning the landscaping works with the family that I will be doing Main effort: remove all the woodchip in the gardens that are around (attached) to the outside of the house and replace with 10mm blue metal, having woodchip close to the house is a recipe for inviting white ants, currently there are no white ants within the block and I would like to keep it that way I'll be buying some large raised garden beds to grow veggies and stuff, and the woodchip will be mulched with everything else that gets dug up, pulled out, or cut down during works Next will some minor drainage and landscaping maintenance up one side of the house, where the fuse box, AC, and solar stuff will go, about 12 mtrs long by 2 meters wide, I'll break up the soil, add gypsum and then I'll dig in a French drains about 300mm deep x 300mm wide and fill it with agg pipe and blue metal, then level out the whole area with a 50mm layer of blue metal, the soil, whilst currently pretty compacted, will break up well with the gypsum to aid in drainage, I'll then cover the area with a 50mm layer of more blue metal In saying this, the drainage issue is minor, but that little hidden away area down the side is untidy and weedy, and as all of the main elec stuff is there I want it neat and tidy to appease my OCD Again, the material excavated from the French drains with be added to the garden bed mulch, as will some rose bushes and some other crap looking garden plants, and a old apricot tree that is looking worse for wear The apricot tree is currently in a little roundish garden bed that is in the middle of the back yard with few other crappy looking plants around it, that will all be removed, levelled, re-turfed, and is a perfect spot for a hills hoist There is also a area about 3m x 2m between the rear fence and shed that will get some attention, it looks like some stuff was stored there and the grass is dead, that will also get broken up and mulched, and is a prime spot for a pumpkin patch I've guestimated that I'll need: 3 tonnes of blue metal, 12 meters of agg pipe, 5kg of Gypsum, and a hills hoist, so a few bags of concrete as well to set it in place (the house currently has one of those pull out 4 line jobs, whilst it works, I want a retro old school hills hoist), I am also going to run some chickens, there's a great spot for a coop, so a chicken coop to suit 4 of those lovely egg laying bitches will also be on the job card That should keep me busy for a while, and will finish off the back yard ready for a early spring planting of some veggies and berries  Once the main effort is done I'll start out the front, there's a large rock garden that could use some TLC, but that is only minor works Should be fully moved in within 2 weeks, the landscaping works will start then Fun times, retirement is good  
    • It happens, that's what your single stage filler is used for.  If it is still visible after the 3 coats of 2k primer, it will be visible after the paint is laid down.  Its hard to give 100% perfect advice without being there in person, I'm very tempted to say stop where you are, fill your pin holes with a single stage putty first then keep going. 
×
×
  • Create New...