Jump to content
SAU Community

Recommended Posts

I've moved 12+ times. All I can say is let them unpack the white goods. Anything broken when you open a box = not their fault. Not sure how companies work as the Defence always booked ours, however, we always bought them drinks and offered to buy them lunch - This seemed to always put them in good spirits and they normally only have cooler bags so if it's stinking hot - chances are their drinks are warm.

sweet. Have cool drinks for them.

I can do that.

The furtherst i have ever moved is from kaleen to belconnen haha

It seems like the closer we get to moving the faster to days go.

I have a phone interview for a job in melbourne tomorrow so hopefully that goes smoothly.

Fellaz anyone know how to troubleshoot a crank with no start issue. Checked injectors using CAS method and they're worrking. Pulled out the coils and tested for spark and there's none. All fuses on the driver side door related to ignition are connected. I'm thinking maybe the harness is kaput or something inbetween.

Any ideas please

no not really :(

anything prior occur to not starting?

has it been difficult to start ?

Is it cranking over and not starting or is it DEAD! ?

have you checked the fuses/relays in the engine bay

is the plug connected to the CAS properly

hows the -/+ cables to the battery. Battery itself ?

If it cranks and doesn't start - What are the plugs like?

Is fuel flowing through?

Edited by Sinista32

You could try some contact cleaner on the plug where the coil pack harness plugs in to the main loom. Could have some stuff in it maybe or could just be stuffed.

I think it is quite common for them to go due to heat.

The CAS could be kaput as well.

i did have problems starting but they fixed it
its cranking over but not starting the sound of the cranking of so close to starting

i checked all fuses today pulled them all out
I took out the CAS in attempt to see if the injectors were working it was fully plugged in

Also changed the plugs the ones i took out were still in good condition no signs of blow out etc.
I took out the supply line and primed it and a lot of fuel came out.

anymore ideas, its kinda really weird for a car that was running fine.

edit: im thinking its the CAS too just have to sure before buying a new one. Any ways of testing them?

i did have problems starting but they fixed it

its cranking over but not starting the sound of the cranking of so close to starting

i checked all fuses today pulled them all out

I took out the CAS in attempt to see if the injectors were working it was fully plugged in

Also changed the plugs the ones i took out were still in good condition no signs of blow out etc.

I took out the supply line and primed it and a lot of fuel came out.

anymore ideas, its kinda really weird for a car that was running fine.

edit: im thinking its the CAS too just have to sure before buying a new one. Any ways of testing them?

Would it have anything to do with clouds of oil smoke billowing out your exhaust?

And, yes it was oil for sure, i could taste it, more than that i was choking on the sht, if you were in my car youd agree its oil. :yes:

Here is my sleep pattern normally, go to bed at 10ish get up at 2 get home from work 6-7pm and start again

Except last Thursday I was at the cop shop till 10:30, asleep by 10:45 work alarm goes off at 11:30, go to Mitchell meet the cops in Mitchell at 12:10 back home asleep by 1am, slept till 4am, go to work and then home at 5:30pm

Ugh glad I have a week off

Workdays, up at 6am, start work at 7am, home by 4pm, string the evening out (my time) for as long as I dare, bed by midnight, up at 6am...repeat.

Now I have a month off, do what you wanna do, be what you wanna be yeah, ooooh. :bunny:

Got up after 10am yesterday and 9:45am today. :thumbsup:

Would it have anything to do with clouds of oil smoke billowing out your exhaust?

And, yes it was oil for sure, i could taste it, more than that i was choking on the sht, if you were in my car youd agree its oil. :yes:

It's not oil because it doesn't do that when I'm on 98. Just unburnt fuel.Only does it when decelerating from WOT. If I ease up normally it doesn't do it. Will check compression just incase something is wrong with the rings.

Here is my sleep pattern normally, go to bed at 10ish get up at 2 get home from work 6-7pm and start again

Except last Thursday I was at the cop shop till 10:30, asleep by 10:45 work alarm goes off at 11:30, go to Mitchell meet the cops in Mitchell at 12:10 back home asleep by 1am, slept till 4am, go to work and then home at 5:30pm

Ugh glad I have a week off

Bed and 10pm and get up at 2am? Do you work 16 hours or something?!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...