Jump to content
SAU Community

Recommended Posts

R33 - 1998 Series II GTSt

Stock Turbo - boost 12psi (bleeder)

FMIC

APEXi Pod

Power FC (Hitman tuned)

3" turbo back zorst

194.6 rwkws (feels awesome !)

Recently

Upgraded to HKS 2535 but only on R32 actuator 10psi.

Needs a retune but feels nice.

Can't wait to hit around 250rwkws.

Have GTR fuel pump, S15 injectors and Z32 waiting to go in. Yeehar !

Doing everything myself which can be slow going but very rewarding.

iLEC : Looking forward to your results dude :)

1999 R34 GTT 2 Door Coupe

Stock Turbo

Power FC

12 PSI boost with AVCR

FMIC

3inch Turbo Back exhaust + Screamer Pipe

Apexi Pod Filter

= 218.7RWKW

1234dynosn4.jpg

Edited by anDru

R33 gts-t

apexi power fc

blitz frount mount cooler

nismo fuel pump

z32 AFM

AVC-R

Split dump pipe

Custom Garrett highflow turbo

Thermo fans

Stock internals

Stock injectors

256 rwkw at 1 bar

Will post new dyno sheet when I scan it in.

Thanks to Paul Fisher at Pulse Racing (Menai - Sydney) - Definately knows his stuff, i would not go anywhere else.

R33 gtst s1

wiseco pistons 20thou

acl race bearings

Trust 1.4mm head gasket

gates timing belt

walbro fuel pump

700cc inj

power fc

avcr

GT3040 .63

s/s manifold

tial 38mm external wastegate

bov

k/n pod

4" intake pipe

Q45 afm

custom fmic

full 3" exhaust

Just tuning no power runs as such we made 240rwkw on just under 14psi, due to missifre problems we couldnt wind the boost up anymore and get some good power runs DOH

Next mods....tomei poncams

splitfire coils and more boost

Edited by sinistagtst

ECR33 Type M

Blitz LM FMIC

Turbo-back 3" exhaust

Splitfire DIS coils

APEX'i Power Intake Pod filter

UAS cold air box

GReddy Profec B-Spec II

GReddy e-Manage Ultimate

Tomei exhaust cam gear

Walbro fuel pump

0.85bar

205kW

http://members.optusnet.com.au/govich/after.jpg

Edited by govich

rb25 s2

wolf v4

fmic

040

blitz sbc id3

3" straight through with highflow cat - no mufflers

old turbo off my rb20(highflow n shiz)

555inj

gates timing belt

ss intake pipe(fluuttEr yo)

stock internals

sticky wastgate

200kw

to come;

custom cai and a fixed wastegate!

hks 3037 pro s turbo with custom housings..

big shout out to vic at EAS Performance!

S13 Rb25 DET

Stock internals

Stock turbo

Apexi Power Intake

FMIC in and out on the same side

Microtec LT12S

Splitfire coils

BATMBL dump and 3 inch Exhaust

12 psi boost HKS EVC IV

Bp Ultimate

Bosch 044

Malpassi

=209rwkw

96 series 2 r33

3 inch turbo back

fmic

stock turbo I think (has steel front wheel maybe series 1 turbo???)

profec b boost controller 12psi

high flow fuel pump

174.8 rwkw on 9 psi and 200.2rwkw on 12psi

havin trouble uploading at the moment.....

1996 Series 2 R33

Mods I have (In order of installation):

Car came with:

3.25 inch cat-back. (1998 5Zigen Border series)

K&N Pod filter.

Blitz SS B.O.V.

Mods I have installed so far:

Custom 3 inch dump pipe

Metal-cat (Magnaflow 650 CFM cat)

Garrett GT3076R w/IW turbo

Turbosmart Boost T

Hyperperformance Automotive FMIC (ebay choina)

Cold Air Induction (To underneath of pod from front bar.)

Exedy heavy duty organic clutch kit.

Will start at 8psi then go to 10psi then 14.7psi once more. Was running 1bar (14.7psi) before my clutch eventually wore out from slipping, I suspect I have a Fuel Cut Defender that I am not aware of.

Dyno this Friday if all goes well.

Edited by Pauly33GTS-t

R33 Gtst S1

Results as per my signature... currently 226.5RWKW (will scan dyno sheets in tonight)

More goodies being installed currently with ECU to be installed next week:

555 Injectors

External fuel pump

FPR

ECU (Adaptronic)

Custom Plenum

Metal Headgasket

Cam Gear

Cam Shafts

New hoses throughout engine just incase lol...

GT3540 for when Stage 3 highflow is max'd out

And then..... wait for stock internals to crap themselves before installing a RB30 bottem end :) (Dad won't help me build the bottom end whilst there is a perfectly good one still working in the car :P)

S1 1994 Gtst

Stock auto ecu (had manual conversion)

Stock turbo @ 11 psi on GBF bleed valve

Stock internals

Gates timing belt

Fmic

SAFC2

Split dump, hi flow cat, 3" cat back(front pipe still to do)

Xtreme 9 puck clutch

K&N panel filter

550hp warlbro fuel pump

271rwhp or 200rwkw

  • 2 weeks later...

R33 Gtst AUTO..Dyno'd at hitmans

-s2 running gear

-exhaust, split dump wrapped/two mufflers old cat, quiet restrictive.

-FMIC (copy hybrid)

-Hi-flow turbo (hi-flow front, vg30BB rear)

-rb20det acuator, running 10-12psi.

-SAFCII

-Pod Filter (not enclosed)

-Stock everything else

-BOOST98 fuel from United servo's.

234.9rwkw@10-12psi (315rwhp)

Please Note: Done in 3rd gear, car slowly ramped up in 3rd so it would not kick back into 2nd.

post-28122-1177649166.jpg

R33 S2 97

Mods:

FMIC

Splitfire coils

Walbro fuel pump

PFC

3inch dump to back (just found out that the cat is still 2.5inch!)

Stock turbo

Stock internals

Tuned by JEM, had over 200rwkw at 14psi but knocked it back to 13psi for a safe tune,

196.4rwkw.

Next mods to be made,

GT3037 turbo

Tomei poncams

550cc injectors

Anyone care to guess how much i'll be making then?

post-25507-1177649949.jpg

Okay just had a re-tune and it made 198rwkw at 12psi.

Edited by AdamsR33

In response to the call for a stock turbo dyno sheet, mild mods. See link below.

94' ECR33 gts25t Type M

KLS 600x300x76 FMIC

HKS Exhaust from dump, 3" to 3.5" superdragger High flow cat (was on car from japan, other than that it was stock)

K&N Pod.

AVC-R EBC.

it made 194rwkw @ 6200rpm. = 260.3 rwhp @ 13psi .

*after looking at the Dynosheet I noticed my AFR's drop quite low. Need a good tune as its runnin a little bit rich.

http://members.optushome.com.au/nastradama...dale260rwhp.jpg

this is my benchmark, will be udpating with all new mods when santa arrives :blink:

Edited by silverbulletR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...