Jump to content
SAU Community

Rb25 Turbo Upgrade, All Dyno Results


Recommended Posts

Stock rb25 det neo.( BP Ultimate)

Power FC.

HKS Gtrs - 15 psi.

Nismo 480cc injectors.

HKS fmic type s.

HKS extension and front pipes hiflow cat trust PE 2.

Tomei fuel pump.

Splitfires.

Greddy profec B.

228.9 kw @ the wheels on 15 psi.

post-41127-1191908082_thumb.jpg

Responsive setup, lag is not an issue. Gtrs is a beautiful turbo on an rb25 :thumbsup:

Edited by silverr34gtt
Link to comment
Share on other sites

1996 R33 GTS-T

* Garrett GT3540

* 3 inch full exhaust system

* Apexi PowerFC with hand controller

* Turbosmart Eboost Controller

* K&N Air filter

* Front Mount Intercooler

* Wastegate/BOV

* Fuel regulator

* Larger Fuel injector

* Fuel pump

* Z32 AFM

282.6KW@18PSI

post-42905-1192104208_thumb.jpg post-42905-1192104241_thumb.jpg post-42905-1192104278_thumb.jpg

Link to comment
Share on other sites

1993 r33 gts-t

T04e garrett turbo

high mount manifold

38mm turbosmart external wastegate

turbotech boost controller ( not all its wrapped up to be)

turbosmart stage 1 BOV

hks FMIC

bosch 040 fuel pump

full 3 1/2 inch exaust

198 rwkw at 14psi (safe tune)

Link to comment
Share on other sites

R33 4door factory 5speed manual

rb25

standard high flow turbo

full3inch zorst with HKS split dump pipe

555cc nismo inj

600+300+80mm cooler

Power FC

apexi power intake filter kit

stock bottom end

standard head

15pound made 299.4rwhp

18pound went 320rwhp

dont have scanner to post up sheets but not telling lies

as Matt Sprite at P.I.T.S auto tuned my car and he is very very good.

car currently off the road getting

Garrett 3540 fitted on highmount with 42mm turbosmart gate

custom plenum made with bigger TB.

will have it back by wed will post up sheets of dyno once tuned. post-36101-1192517778_thumb.jpg

post-36101-1192517815_thumb.jpg

Link to comment
Share on other sites

  • 3 weeks later...

Thought I would post mine up then!

R33 GTST

Front to back

Big FMIC

Apexi Power Cone thing

Custom made hard pipe off the turbo

Nismo 555cc's injectors

Some kind of turbo, looks standard but it aint!

Turbo Elbow with screamer pipe

Full kakimoto exhaust from elbow back

Apexi Power FC

Greddy Profec B spec 2

255lbh Walbro Fuel pump.

@ 0.85 this made 299bhp

@ 1.bar this made 336.3bhp (247kw)

all at the fly.

Link to comment
Share on other sites

2nd Time Round

List as Follows:

KKR-480 (Otomoto)

Custom Tuned Length S/S Turbo Manifold

New 3" Exhaust, 3" Cat, No Mufflers

Custom Intake/Fmic Piping, Fmic Tube/Fin

600cc Injectors

Cleaned/Smoothed Plenum/Runners/Throttle Body

Apexi Power Intake

Z32 AFM

Adjustable Exhaust Cam Gear

Apexi Power Fc

Ebc Dual Boost/Scrammble Switch Soon to be upgraded to greddy profec b

Just Jap Tube and Fin Pressure drop from Just Jap Kit (Soon to be upgraded to Otomoto 5" Core)

Cars Tuned got 258rwkws Unique Autosports Tune but that was on 91ron Standard unleaded Petrol Little to no Timing at all

Had to earth out walbro fuel pump (max voltage) plus problems with walbro not keeping pressure up, evident on dyno. Must admitt is a clean smooth powerline. Runs 20psi but drops to 16psi due to walbro.

Lol Didnt get what i WAS expecting from the KKR-480 :w00t:, KKR 480 is really responsive on the rb25 comes on boost at 3000rpm full boost at 4400 rpm did change fuel pump now holds 20psi all the way to redline which is great, got 275/18 and even at 100klms or so 3rd spins lol satified me for 1 day.

3rd Time

So now i have the kkr-560 but its been modified/machined housings so should see close to if not over 300rwkws easily, couple of weeks and we will find out. But ill spend the money this time on 98octane fuel lol

Boost comes on later around 3300rrpm and now i have serious problems with fuel on lappy drops to 10psi almost soon as it hits fullboost (Thats with a brand new walbro 500hp pump), will get bigger/better pump (bosch 044) also some Tomei poncams amd maybe nos to get this big suckers of a turbo spoolin up 1000rpms more or so.

Will see closer to 330rws+ without nos thanks to Pulse Racing at Menai!

Edited by INFRNT
Link to comment
Share on other sites

Update - new figures

R33 S1 GTS-t

rebuilt motor

fully balanced bottom end

CP forged pistons

k&n pod filter with CAI

3.5" turbo back exhaust + high flow cat

front mount intercooler

bleed valve boost controller

bosch 040 fuel pump

apex power fc

nismo fuel pressure reg

Z32 air flow meter + tomei plug

hiflowed turbo with VG30 exhaust housing

241.6kw

ill add the dyno link into my sig when i upload it

Link to comment
Share on other sites

r33 gtst series 1

stock motor

XTR to4e highflow

denso 800cc injectors

trust drag spec 110mm fmic

split dump into 3" front pipe and 3.5" hks cat back

apexi power intake

walbro 600hp fuel pump

blitz dual sbc boost controller

z32 afm

power fc

252.9rwkw on 1.1bar

Edited by scarface
Link to comment
Share on other sites

1994 series 1

Power fc

Stock turbo

Split dump pipe

Hi flow cat

3" exhaust

Front mount intercooler

GTR fuel pump

Nismo fuel reg

Stock injectors

Tuned by Hitman tuning in penrith

Oil filter relocator

222kw at the wheels on 12 psi

post-31615-1195376437_thumb.jpg

Link to comment
Share on other sites

1993 R33 GTST

Stock Turbo with some home mods

Stock ECU, fuel pump, injectors,ignition coils

Spilt dump....over 20kw improvement from that!

3 inch exhaust, Hiflow cat, Nismo muffler.. very quiet!

Turbosmart boost controller

Adjustable Exhaust cam gear set at -2deg.

Hybrid front mount Intercooler 800x600x75

Iridium Spark plugs at 0.8mm

K&N Panel Filter

Modified air intake hose to Turbo

Valvoline Syn Power motor oil

Tuned on Shell V power

211rkw at 10psi CO 10.8

510Nm

Link to comment
Share on other sites

post-24130-1196066567_thumb.jpgpost-24130-1196066609_thumb.jpg

post-14443-1133252135.jpg

Main mods are:

Nismo fuel pump

Full exhaust

Custom Garrett turbo - full boost by 3.1 k

z32 AFM

Blitz FMIC

AVC-R

Power FC

Radiator upgrade

Nismo 555cc injectors

Tomei Cams

Splitfires

Stock internals

Made 295 rwkw at 17 psi

Clutch starting to slip though (on road, was OK for dyno run) :teehee: so time for another upgrade - not making excuses though, very happy with the results as usual

post-24130-1196066644_thumb.jpg

Link to comment
Share on other sites

Car: 1989 cefiro

Engine: rb25/rb26 hybrid

Power: 580whp 434ft/lbs TQ @ 1.2bar C16 gas

Performance Mods:87.25mm wiseco forgies 9.8:1, egale H beam RB26 rods, acl bearings, N1 oilpump, R32GTR crank:with custom collar, block line bored, and extra oiling for 26 crank, head quench removed, three angle valave job, hks 272 dur 8.5 lift cammies, hks springs & retainers, Tomei adj cam gears, tomei 2mm head gasket, ARP head studs, GReddy TD06H-25G 16cm turbine, GReddy SS exhaust mani, GReddy GT 50mm wastegate, 555cc injects, rb26 power fc de-jetro, Splitfire coil packs, GReddy intake Mani with Q45 TB, nismo intank fuel pump, bosch inline fuel pump, nismo fpr, power enterprise timing belt...etc...

Dynoed:UNNATURAL INC. Portland, Oregon, USA

When: NOV 12 2008

Mode:awesome

dynosheet.jpg

Edited by cefirosliderRB2.7
Link to comment
Share on other sites

r33 gtst

split dump pipe

apexi front pipe

xforce cat back with xforce high flow cat

stock turbo at 12psi on GFB bleed valve

stock computer with SAFC2

Apexi power pod with custom heat shield

walbro 550hp fuel pump

npc ceramic 5 puck clutch

red line old tune, blue new tune

290rwhp or 216rwkw

post-24566-1196397398_thumb.jpg

Edited by Pal
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×
×
  • Create New...