Jump to content
SAU Community

Recommended Posts

R34 GT-T (NEO) '98 Manual

Stock Turbo

Greddy FMIC

Greddy Profec B EBC

Walbro Fuel Pump

Nismo 480CC Injectors

Greddy E-manage Ultimate

Z32 AFM

3 inch AM performance front/dump, high flow cat, 3 inch zaust.

Apexi Intake

208.3kw @ wheels on 12 psi on a 40 degree day.

UPDATE!

HKS GT2835 Pro S

Carbon Fibre Air Box with CAI

Tuned on 13psi made 244kw's at the rears. Injectors were maxing out and he wasn't gonna push more boost into it without either a bigger set or a FPR. Hoping for 270+ in the near future! :woot:

97 s2 33

stock turbo

stock ecu

stock internals

Tpiece set for 10psi

3 inch cat back

pod

trust fmic

Ran 228.3hp on dyno at powercruise was pretty hot at the time. no scanner handy to post sheet.

R34 GT-T (NEO) '98 Manual

Stock Turbo

HDI Hybrid FMIC

HKS Evc 5 EBC

Walbro Fuel Pump

OEM Injectors

Apexi Power FC

OEM AFM

OEM front/dump, high flow 4" HJS cat, 4" Futsitsubo catback

HKS Intake

Greddy style plenum

170kw @ wheels on 11 psi

Edited by Akis

very old dyno test.

october 2008.

96 s2 33

stock turbo

stock ecu

stock internals

Stock boost

3.5 inch cat back

pod

standard intercooler

hot day +35degrees

212hp/ 158.1rwkw

one of the best standard dynos ive seen

Same car as above ^^^ 2 months later hot day in summer30degrees and very humid

96 s2 33

stock turbo

stock ecu

stock internals

Tpiece set for 10psi

3 inch turbo - cat, 3.5 catback

pod

Just jap stealth fmic

192.5rwkw still a great result

R33 RB25

Standard bottom end.

Ported and Polished Head

HKS 256/264 cams

HKS GT-RS Turbo

Front Mount

Apexi Power intake

Apexi Power FC

Nismo 550cc Injectors

Nismo Fuel Pressure Regulator

Walbro Pump

Full zorst

Splitfires

Plazaman Plenum

Z32 AFM

337.1 rwhp (253rwkw) @ 1 Bar rev limited to 7000rpm - Ill scan and post dyno sheet soon

Same car. Same mods running 11psi on a different dyno...

310 rwhp(232rwkw) @ 11psi

R33 S2

HKS 2835 PRO S

Nismo 555cc injectors

Splitfire coilpacks

HKS FMIC

3" Turbo back exhaust

HKS Pod filter

Intank fuel pump

Wolf V500 ECU

359rwhp (268rwkw) @ 16 psi

Edited by SkyDragon

1997 R33 GTS25t

Unopened RB25DET, 165,000kms

Stock coil packs with some silicone goo to beef up insulation, stock intake and exh manifolds

BP Ultimate 98 Fuel

Nismo 555cc injectors

Walbro 255lb/hr fuel pumpfgvbbbb

GTSLink Plugin ECU

Apexi AVC-R boost controller with Norgren pressure relief valve aiding spool

Cheap random 600x300x76mm front mount intercooler

K&N filter with 4" intake

Garrett GT3076R .82a/r Internally gated turbo

Trust Power Extreme 2 exhaust

lith_dyno284.jpg

1998 R34 GTT

Standard RB25DET, ~112,000kms

Standard coil packs, 98 octane fuel, K&N pod, ARC front mount intercooler and trust exhaust

Standard turbo, injectors and ECU, Turbotech bleedvalve

219rwkw @ 12psi

Upgraded GT3071R turbo and Nismo 480CC injectors driven by Nistune Type 4 board

278.5rwkw @ 17psi

http://forum.nistune.com/viewtopic.php?t=950

Next up will be fitting cams and also some extra tuning for the VTC since theres a bump in the current dyno curve where it was left stock. Also looking into tweaking the factory boost control solenoid via factory ECU with variable boost control rather than using the Turbotech valve

Hey guys. got my R33 GTS-T Series II dynod last friday at R E

Mods,

Cooling Pro FMIC

Apexi Bov

Cat back exhaust

Gredy Profec B 2 boost controller 12 Psi

175Kw ATW

heres a vid to go with it.

R34 GT-T (Manual)

Blitz LM Pod Filter with Cold Air Feed

HDI GT Spec Intercooler

Custom 3" Turbo Back Exhaust

Stock Turbo

Stock Internals

Stock Boost Controller

207.9 RWKW @ 11 PSI

Installing PfC today and will chuck up DynoSheet After Tune! =D

R33 RB25

Standard bottom end.

Ported and Polished Head

HKS 256/264 cams

HKS GT-RS Turbo

Front Mount

Apexi Power intake

Apexi Power FC

Nismo 550cc Injectors

Nismo Fuel Pressure Regulator

Walbro Pump

Full zorst

Splitfires

Plazaman Plenum

Z32 AFM

Gizmo EBC

337.7rwhp @ 16.5psi (the nipple on the compressor housing had blown its bung off, so it was holding 16.5psi, but running alot more fuel They said it was running extremely rich, and now i know why)

Dyno run from the weekend... pitty i found the turbo leak after this run lol

1255261231.jpg

And the computer screen of the 2 pulls....

1255470015.jpg

On the rollers at the Buddys fire car show

1255308417.jpg

1997 Series 2 R33 Manual

RB25DET

Nismo 740CC Injectors

Haltech E11V2 with Airtemp sensor & 3bar MAP.

Garrett 3076R(3037S) 0.82 @ 15psi

NGK Iriway7 Sparkplugs

Superspark Coils

FMIC with Stock piping

Turbotech Boost T

Full boost seen around 3.5k-4k rpm

2 Degrees Extra Timing

Car is making 265rwkw

Dyno sheet was taken after the 265rwkw run was done

post-a252105-262rwkw-Dyno-Sheet-Edit.jpg

Edited by Aberax
  • 4 weeks later...

s2 rb25det

hiflow turbo

sard 750cc

sard P/R

walbro H/P fuel pump

3inch turbo back

upgraded stronger acturator

ems

safc

frontmount

16psi makes 326hp at the wheels with AUTO just did the manual box made 378hp

then week later the turbo f##ked up so looking for upgrading to a gt3540 with .82

does any 1 think its laggy um and when does boost kick in

if some 1 can help us out cheers

if some 1 can help

Performance Modifications:

ACL Race Main Bearing Kit

ACL Race Conrod Bearing Kit

APEXi Power FC & Hand Controller

ARP Head Studs

Blitz Air Pod

Blitz Cat-Back

Chasers Motorworks Custom Airbox

Chasers Motorworks Custom Intake Piping

Chasers Motorworks Custom Intercooler Piping

CP Forged Pistons

Cusco High Pressure Radiator Cap

Cusco Oil Catch Can

Dayco Fan Belt

Dayco Power Steering Belt

High Energy Oil Sump (7L)

HKS EVC-S

HKS GT-RS

GReddy Oil Cooler

Monza Intercooler

N1 Oil Pump

N1 Water Pump

Nismo 740cc Injectors

Nismo Fuel Pump

Nismo Fuel Regulator

NGK Spark Plugs

Pivot Raizin Volt Stabilizer

Plazamaman Plenum

R.E.V I-Beam Conrod

Tomei Metal Head Gasket 1.2mm

Tomei Pon Camshafts (IN,EX 256 Lift)

Tomei Z32

X-Force Front/Dump Pipe

X-Force High Flow-Cat

Power Output:

280.4 rwkw on 20psi

R33

RB25DET

Standard internals

Standard Injectors

Standard fuel pump

Standard fuel pressure reg

jjr dump

jjr cat

3-3.5" apexi/jasma exhaust

pfc

boost tee

jjr turn flow intercooler

jjr oil cooler

apexi pod

plugs gaped at .8

187rwkw @ 12 psi on stock turbo

215rwkw @ 14 psi on hypergear high flow

P1851_21-11-09_1.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...