Jump to content
SAU Community

Recommended Posts

R34 RB25DE+T

turbonetics stage 2 T3 to4 turbo ext gate

gtr fuel pump

nismo fuel reg

stock injectors & afm

emanage ultimate

jjr fmic

apexi super intake pod

turboback (2.5" dump/front & cat tho) catback is 3"

184 rwkw @ 9psi

Update:

3" dump/front pipes (still with 2.5" cat tho)

Profec B Spec 2

14psi

562.4nM

201.2rwkw @ 174KPH

just had a full retune.... (not a cleanup, full delete and start fresh)

car has:

hks 2835 pro s

greddy rb26 ex cam gear

3" exhaust

hybrid gt fmic

nismo 555cc injectors

nismo fuel pump

z32 afm

splitfires

bcpr7es @ 0.8

pod in box with cai

power fc

fc datalogit

blitz dsbc spec s

car made 280rwkw on BP ultimate 98 and 320 on united e85

very happy with the results as it's a very safe tune.... pulled 2 deg timing out of the top end and only lost 5kw, fixed all the cruise and idle issues, cleaned up a boost spike and got the car running absolutely perfectly.

my thanx again go out to trent & cat @ status tuning, who always go well out of their way to make sure my car is perfect! :)

all graphs are in sae correction mode so the results are the same as dyno dynamics in shoot 6

med_gallery_36777_3194_124976.jpg

med_gallery_36777_3194_29295.jpg

med_gallery_36777_3194_64781.jpg

med_gallery_36777_3194_73268.jpg

arias pitons

1.8mm cometic head gasket

spool H beams

arp head, main and rod studs

greddy inlet plenum

80mm throttle body

sard 800cc side feed injectors

040 pump

GT35R with 1.06 exh housing

Vipec ecu

tial 50mm external 'gate

nismo twin plate clutch and billet flywheel

splitfire coils

fully blueprinted

std crank

std head

std fuel pressure reg

+ probably other stuff i cant think of atm

BP ultimate

440 rwhp at 22psi (running out of fuel from the pump)

wasnt done in shootout mode either, was just while tuning, didnt get time for a proper run...

Edited by cuzz_33
  • 2 weeks later...

1995 series 1.5 R33 Gtst stock internals

(vitals)

- GReddy T67-25g 10cm rear high mount, with external gate/screamer

- modified stock plenum, 90mm throttle body

- splitfires, NGK iridium sparks

- 660cc Sard injectors

- Power Fc+Hc, boost controller

- external 040, internal walbro copy

- Greddy front mount

- stainless high mount manifold

- HKS Pod

- 22-20psi

- BP Ultimate 98

303.6rwkw

1995 series 1.5 R33 Gtst stock internals

(vitals)

- GReddy T67-25g 10cm rear high mount, with external gate/screamer

- modified stock plenum, 90mm throttle body

- splitfires, NGK iridium sparks

- 660cc Sard injectors

- Power Fc+Hc, boost controller

- external 040, internal walbro copy

- Greddy front mount

- stainless high mount manifold

- HKS Pod

- 22-20psi

- BP Ultimate 98

303.6rwkw

EDIT external bosch 044

Edited by R31Nismoid

1996 R33 GTST S2

Unopened RB25DET, 188,000kms

Splitfire coil packs

BP Ultimate 98 Fuel

Nismo 555cc injectors

Walbro 255lb/hr fuel pump

PowerFC

profec 2 spec B

FMIC

Mesh air filter with CAI

z32 afm

Garrett GT3071R

3" turbo back exhaust

Adj Exhaust cam gear

243KW@wheels

Previously on stock turbo, injectors afm & fuel pump was making 209kw @ wheels on 11psi

1996 R33 GTST S2

Unopened RB25DET, 188,000kms

Splitfire coil packs

BP Ultimate 98 Fuel

Nismo 555cc injectors

Walbro 255lb/hr fuel pump

PowerFC

profec 2 spec B

FMIC

Mesh air filter with CAI

z32 afm

Garrett GT3071R

3" turbo back exhaust

Adj Exhaust cam gear

243KW@wheels

Previously on stock turbo, injectors afm & fuel pump was making 209kw @ wheels on 11psi

Turbo Specs: Comp is .50AR

unsure of turbine AR, but either .64 (more likley) or .71 i have heard thrown around.

post-14968-1262692219_thumb.jpg

1998 R34 GTT

unopened RB25DET Neo, 80,000kms

shell Optimax 98 Fuel

stock injectors

stock fuel pump

nizmo Fuel Pressure Reg

powerFC

greddy boost controller

hks FMIC

hkd pod

z32 afm

Garrett GT3071R

3.5" turbo back exhaust

261KW@wheels @15psi

post-68229-1262951293_thumb.jpg

  • 2 weeks later...

1996 R33 GTS25T S2 - 92000km

STOCK TURBO

Z32 ECU - NISTUNE

FMIC JJR RETURN FLOW TYPE

K&N PANEL

EBC - Bit under 12psi

3 INCH EXHAUST

SPLIT FRONT/DUMP

187rwkw

Cant say i was over the moon with the result. Oh well.

R34 RB25DET NEO (In R32 GTST)

3" Exhaust

Front Mount

Stock everything except for fuel pump

Adjustable exhaust cam gear

BP Ultimate

Greddy Profec B Spec II (12psi)

Pod filter

Nistune ecu

32NEOCompare.jpg

Stock boost/tune then 12psi and nistuned.

Edited by Hibino

R34 GT-T

RB25DET Neo

Fujitsubo Turbo back exhaust

Apexi Pod Filter

i think stock boost 7-8psi, was a dyno day so dyno operator didnt get time to get boost reading.

Standard ecu, turbo, smic

BP Ultimate

167.1rwkw

post-29432-1264410598_thumb.jpg

1996 R33 GTS25T S2 - 92000km

STOCK TURBO

Z32 ECU - NISTUNE

FMIC JJR RETURN FLOW TYPE

K&N PANEL

EBC - Bit under 12psi

3 INCH EXHAUST

SPLIT FRONT/DUMP

187rwkw

Cant say i was over the moon with the result. Oh well.

Upgrade Fuel pump and Z32 Airflow now has 207rwkw on a touch over 12 psi! same dyno. now im happy

1998 r34 gt-t

248rwkw

HKS GT-RS turbo

pod filter

FMIC

Apexi Power FC

forged internals

cat back exhaust cannon style

fuel pressure reg

walbro fuel pump

stock injectors (to be changed to 600cc with new turbo)

stock AFM (to be changed with new turbo)

Just wondering i have sold my GT-RS turbo to make more power was thinking of putting on a garret GT3582 to make the 300rwkw+ mark but would i have a real unresponsive lag monster???? what turbs would people recommend for more power but still responsive?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hot tip, stop picking at shit. Live in bliss instead   From my recent experience in rust repairs, white it may seem to not go much further back, you'll still need to cut back a bit further.  From what I can see there, the outer skin, and the inner is rusted too. From what I can see you've got the inner one which is all structural, and window likely affixes too.   If tag Murray Calavera here, but my phone won't let me tag him, he'd probably be able to give the best advise.   I do know, welding roof panels is a right pain in the bollocks! Very heavy to heat distort the roof and warp it all.
    • Some of the filler.   Also if I look under the top flap of metal it starts looking good quite close to the edge. I get the feeling it doesn't go much further.
    • So, I finally started digging at the bit of my roof that was cracking and bulging a bit. Well, it was just thick filler that was covering some pretty bad rust. I didn't find the edges, I was too bummed to keep going.  There are a few holes as you can see. There was just so much filler but looks like no attempt under the filler to prime or use rust converter, just slapped filler on exposed rust.  Anyway, I'm going to take the windshield out and find the edges. I'd love to fix this myself as I'm pretty sure it'll be expensive to get done properly. I was thinking I could just get a cut piece from another E39 and just weld it in place as it would be the right size and shape.  Thoughts?
    • This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
×
×
  • Create New...