Jump to content
SAU Community

Recommended Posts

hi,

ive been a lurker on these forums for a while...

i know there is a user here who is able to look up this information but i can not remember their name.

i urgently need to know the date of manufacutre of this 1990 GTR

BNR32-007802

if anyone can point me to the month of manufacutre i will be very very gratefull

cheers,

Lang

Link to comment
https://www.sau.com.au/forums/topic/56398-urgent-month-of-manufacture-bnr32/
Share on other sites

i am very very gratefull funky.

i bidded on this car at auction today i am yet to hear if sucessfull.

if i had not have found out the month i woudnt have been able to bid at all so i cant thank you enough..

if he buys now he shouldn't have any problem. if they change the law, just write in a letter to dotars with a copy of the recipt of puchase and exact date of purchase and they should theoretically allow you to bring it in under the current laws.

BUT.......it is stated on the doatars website, and in written correspondance that I am no doubt many others have recieved..........NOT to purchase 1990 model vehicles under the presumption they will allow them.......

I would think this would enable them to refuse approval, given that we were warned......

I myself have avoided purchasing 1990 model vehicles for this reason.

Perhaps you could ellaborate on your reasoning funky? Have you recieved in writing something to follow up what you have stated? I am VERY interested to know :rofl:

I'm thinking that Shan was thinking along the lines that DOTARS won't penalise you (by refusing import approval for a car you've bought already).

When they changed the 15 year rule from year of manufacture to month and year, initially DOTARS did not allow any exceptions. However they decided to amend that for people who had bought cars already in the few months surrounding the announcement of the new rule.

However, another chain of thought has me seeing that since DOTARS have forewarned ppl they may not be able to get 1990 cars in, like RiverSide said..

I wish they'd make up their mind already!

RiverSide, show me this notice on the dotars website or any copies of this written notice that you have recieved. To date I haven't seen any (then again I haven't been into work for a few days now).

RiverSide, show me this notice on the dotars website or any copies of this written notice that you have recieved. To date I haven't seen any (then again I haven't been into work for a few days now).
ALERT - IMPORTATION OF VEHICLE 15 OR MORE YEARS OLD

The Government is currently considering the responses to the discussion paper on the Importation of Vehicles 15 or More Years Old and the options outlined in the paper.  

Prospective importers should be aware that there may be changes to the current regulations. You should not assume that vehicles manufactured in 1990 will be allowed to be imported should the regulations be changed.  

Source: http://www.dotars.gov.au/transreg/vsb/vsb_10.htm

ouch... there goes that idea then ;)

that's strange tho, I've searched thru all the parliamentary transcripts and I still can't find any conclusive bills etc. wierd.

Funky.......As far as I am aware, no concise bills have been passed at this stage. The warning is shown on their website as posted above......from what i can gather you are in the business of importing, I am surprised you did not recieve direct correspondance from Dotars stating the same thing.

Last years AMENDMENTS to the ruling were a very quickly sorted matter, as the ruling had always stated that the month of manufacture was required, however this was only enforced as of Sept 2nd. Due to the surprise nature of that announcement it was not surprising that Dotars allowed vehicles to be imported via the "loophole".

This time around however we have all been forewarned. I personally do not feel confident enough to risk purchasing 1990 model vehicles until a firm ruling has been announced.

Lang.......I sincerely hope this works out for you, last thing I would like to hear is of people losing money due the change in legislation. As you mentioned, you were aware of the possibilities and have found it to be a viable risk. Good luck.

We've recieved a verbal warning from a dotar's representative, we requested it in writing but to my knowledge nothing was recieved, unless it was in the last week as I haven't been in because I was sick.

Will check on it tomorrow when I get into work tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...