Jump to content
SAU Community

Recommended Posts

I want to buy my partner wheels for his R33 GTR skyline can you please help with a few questions - Do the rims need to be the same width all round? Or can you use narrow rims on the front with the same width tyres? Also if going to 19” rims what size tyres should I get him?

I have spoken to a major tyre shop and they were very unhelpful. Thank you very much!

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/
Share on other sites

Guest two.06l
Thank Richard!! The rims will probably be 8.5" so what size would you suggest??

P.M. Wreckedhead as he has R34 GTR rims with tyres ready to go. Its widely recognised that these rims look hot on a 33 GTR.Heres a link. http://www.skylinesaustralia.com/forums/sh...ead.php?t=56621

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1113434
Share on other sites

JustJap also have a set of R34 GTR rims for $3K (they're 18x9) and look hotness.

For 9" wide you should get 235's stretched, or 245's. I'd get the 235's stretched as there's no sidewall flex, problem with this is that you gotta make sure you know how to park otherwise you'll gutter rash them to hell and back.

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1113454
Share on other sites

Don't get 8.5" wide, get at least 9" wide since thats stock width, OR 10" wide fit as well..

same size wheel AND tyre all the way around...

Go witha good brand, not something cheap like ANZ etc... It may be worth asking your bf what he wants, it would suck to spend 4k on wheels/tyres to have your bf not really like them :D

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1113465
Share on other sites

Thank Richard!! The rims will probably be 8.5" so what size would you suggest??

no worries, happy to help PK.

Like the other lads said, I'd suggest 9inch wide +. For me I think 18X9 is a good size for a 33GTR and the tyres will be a little more affordable than for the 19s. If he's really keen on some BIG wheels though, then 19s would be the way to go.

happy wheel hunting.

Richard

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1113490
Share on other sites

I second/third that you will need all the same all around.

I also think that if you're going to the trouble to get new wheels for him that they should be wider. 9" or 10" would look really hot, especially with a 235 or 245 width tyre stretched across them.

I'm not sure about offset as I've never owned/fitted a skyline let alone a GTR!

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1113493
Share on other sites

If your going for a 19 inch rim best bet would be to go for a 19x91/2 with a offset of plus 11 for a 33 or 34 GTR and the correct tyre is a 275/30ZR19 this will give you the closet to the correct height this is what Rays Engineering recommand for a 33 or 34 GTR, for 18 inch most use 18x9 with a 265/35 tyre i wouldn't go under 245 as this is what 33 and 34 GTR's came with so if you wanted to keep costs down go for a 245/40ZR18 . Also the PCD is 114.3

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1113971
Share on other sites

r u guys sure the wheels have to be the same size? cosa the ones on my car are 8.5 on the front with 9.5 on the back, with 255s all round

and the tyre placard says the tyres are different sizes, like rear was about 15mm wider, can't remember exactly what size, i'll have to check tomorrow

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1114073
Share on other sites

Nuh if you have different widths on a gt-r the attesa 4wd can stuff up. All gt-rs should have the same width wheels

yeah the torque split gauge goes crazy. It happens on a friends car who has different sizes.

As for the 19's I agree with gtr13, go for 275/30/19 on 9.5 inch rims.

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1114200
Share on other sites

I thought the GTR's came with wider on the back standard.

This is what I've seen on every GTR.

Could you show us the GT-Rs you've seen with different wheel widths front and rear? It's possible you saw GTS-ts or GTS25t's that had GT-R badges on them... not GT-Rs.
Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1114299
Share on other sites

hmm you're looking at a big tyre bill.

thats for sure, especially for 19" rims. I would go for 265s at least...depending on how much hp the car has or will have. Cost big $$$, but has a sweet footprint.

I have 265's all round on my gts-t (bit of over kill seeing as only driving the rears) but looks hot with the wide treads.

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1114773
Share on other sites

Hey guys, thankyou all VERY much, you'ra great!. Just one more question - Is there a measurement or what is it called when one wheel looks narrower but isn't - sorry if this doesn't make sense, but at the moment the car has the same size rims on it, but the spokes on the front wheels are closer out to the tyres, while the spokes on the back wheels are a lot deeper in.

Thanks again!

Link to comment
https://www.sau.com.au/forums/topic/57911-girl-needs-help/#findComment-1114780
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1680, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
    • hahah when youtube subscribers are faster than my updates here. Yes some vid from the day is up, here:  Note that as with all track day videos it is boring watching after the bloopers at the start.  The off was a genuine surprise to me, I've literally done a thousand laps around the place and I've never had instability there; basically it rolled into oversteer, slipped, gripped and spat me out. On the way off I mowed down one of the instructor's cones and it sat there all day looking at me with accusing cone eyes as I drove past. 1:13:20 was my fastest lap, and it was in the second session, 3rd lap.  It (or me!) got slower throughout the day as it got hotter.      
×
×
  • Create New...