Jump to content
SAU Community

Girl Needs Help!

PK2
 Share

Recommended Posts

PK2 Apprentice

PK2

Posted
Posted

I want to buy my partner wheels for his R33 GTR skyline can you please help with a few questions - Do the rims need to be the same width all round? Or can you use narrow rims on the front with the same width tyres? Also if going to 19” rims what size tyres should I get him?

I have spoken to a major tyre shop and they were very unhelpful. Thank you very much!

Link to comment
Share on other sites
CerealKiller Veteran

CerealKiller

Posted
Posted

JustJap also have a set of R34 GTR rims for $3K (they're 18x9) and look hotness.

For 9" wide you should get 235's stretched, or 245's. I'd get the 235's stretched as there's no sidewall flex, problem with this is that you gotta make sure you know how to park otherwise you'll gutter rash them to hell and back.

Link to comment
Share on other sites
ferni Grand Master

ferni

Posted
Posted

Don't get 8.5" wide, get at least 9" wide since thats stock width, OR 10" wide fit as well..

same size wheel AND tyre all the way around...

Go witha good brand, not something cheap like ANZ etc... It may be worth asking your bf what he wants, it would suck to spend 4k on wheels/tyres to have your bf not really like them :D

Link to comment
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted
Thank Richard!! The rims will probably be 8.5" so what size would you suggest??

no worries, happy to help PK.

Like the other lads said, I'd suggest 9inch wide +. For me I think 18X9 is a good size for a 33GTR and the tyres will be a little more affordable than for the 19s. If he's really keen on some BIG wheels though, then 19s would be the way to go.

happy wheel hunting.

Richard

Link to comment
Share on other sites
someonestolecc Grand Master

someonestolecc

Posted
Posted

I second/third that you will need all the same all around.

I also think that if you're going to the trouble to get new wheels for him that they should be wider. 9" or 10" would look really hot, especially with a 235 or 245 width tyre stretched across them.

I'm not sure about offset as I've never owned/fitted a skyline let alone a GTR!

Link to comment
Share on other sites
gtr13 Proficient

gtr13

Posted
Posted

If your going for a 19 inch rim best bet would be to go for a 19x91/2 with a offset of plus 11 for a 33 or 34 GTR and the correct tyre is a 275/30ZR19 this will give you the closet to the correct height this is what Rays Engineering recommand for a 33 or 34 GTR, for 18 inch most use 18x9 with a 265/35 tyre i wouldn't go under 245 as this is what 33 and 34 GTR's came with so if you wanted to keep costs down go for a 245/40ZR18 . Also the PCD is 114.3

Link to comment
Share on other sites
KILL HSV Proficient

KILL HSV

Posted
Posted

r u guys sure the wheels have to be the same size? cosa the ones on my car are 8.5 on the front with 9.5 on the back, with 255s all round

and the tyre placard says the tyres are different sizes, like rear was about 15mm wider, can't remember exactly what size, i'll have to check tomorrow

Link to comment
Share on other sites
GTR R32 Collaborator

GTR R32

Posted
Posted
Nuh if you have different widths on a gt-r the attesa 4wd can stuff up. All gt-rs should have the same width wheels

yeah the torque split gauge goes crazy. It happens on a friends car who has different sizes.

As for the 19's I agree with gtr13, go for 275/30/19 on 9.5 inch rims.

Link to comment
Share on other sites
Rezz Grand Master

Rezz

Posted
Posted
I thought the GTR's came with wider on the back standard.

This is what I've seen on every GTR.

Could you show us the GT-Rs you've seen with different wheel widths front and rear? It's possible you saw GTS-ts or GTS25t's that had GT-R badges on them... not GT-Rs.
Link to comment
Share on other sites
HypeR33 Mentor

HypeR33

Posted
Posted
hmm you're looking at a big tyre bill.

thats for sure, especially for 19" rims. I would go for 265s at least...depending on how much hp the car has or will have. Cost big $$$, but has a sweet footprint.

I have 265's all round on my gts-t (bit of over kill seeing as only driving the rears) but looks hot with the wide treads.

Link to comment
Share on other sites
PK2 Apprentice

PK2

Posted
  • Author
Posted

Hey guys, thankyou all VERY much, you'ra great!. Just one more question - Is there a measurement or what is it called when one wheel looks narrower but isn't - sorry if this doesn't make sense, but at the moment the car has the same size rims on it, but the spokes on the front wheels are closer out to the tyres, while the spokes on the back wheels are a lot deeper in.

Thanks again!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Daleo
      Exemplary Сasual Dating - Real Women

      By Daleo · Posted

      Embrace the freedom of casual encounters on the best dating app in town! Verified Maidens Superlative Сasual Dating
    • dyl33
      Creative in cabin amp locations

      By dyl33 · Posted

      Slimline sub on the rear parcel shelf is doable. Pioneer TS-WX140DA is only 70mm high.   
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      People like Johnny Dose Bro might be laughing at my post because I accidentally added 100mm to my numbers. 350-355 is indeed the lower limit. 450 is off-road Skyline spec.
    • GTSBoy
      Pillowball/Hardened Runner Hybrid Approach

      By GTSBoy · Posted

      What is the "compromise" that you think will happen? Are you thinking that something will get damaged? The only things you have to be concerned about with spherical jointed suspension arms are; Arguments with the constabulary wrt their legality (they are likely to be illegal for road use without an engineering certificatation, and that may not be possible to obtain). A lot more NVH transmitted through to the passengers (which is hardly a concern for those with a preference for good handling, anyway). Greatly increased inspection and maintenance requirements (see above points, both).   It is extremely necessary to ask what car you are talking about. Your discussion on strut tops, for example, would be completely wrong for an R chassis, but be correct for an S chassis. R32s have specific problems that R33/4 do not have. Etc. I have hardened rubber bushes on upper rear control arms and traction rods. Adjustable length so as to be able to set both camber and bump steer. You cannot contemplate doing just the control arms and not the traction arms. And whatever bushing you have in one you should have in the other so that they have similar characteristics. Otherwise you can get increased oddness of behaviour as one bushing flexes and the other doesn't, changing the alignment between them. I have stock lower rear arms with urethane bushes. I may make changes here, these are are driven by the R32's geometry problems, so I won't discuss them here unless it proves necessary. I have spherical joints in the front caster rods. I have experienced absolutely no negatives and only positives from doing so. They are massively better than any other option. I have sphericals in the FUCAs, but this is driven largely by the (again) R32 specific problems with the motion of those arms. I just have to deal with the increased maintenance required. Given how much better the front end behaves with the sphericals in there.....I'd probably be tempted to go away from my preference (which is not to have sphericals on a road car, for 2 of the 3 reasons in the bulleted list above), just to gain those improvements. And so my preference for not using sphericals (in general) on a road car should be obvious. I use them judiciously, though, as required to solve particular problems.
    • joshuaho96
      Misfire/stalling issues

      By joshuaho96 · Posted

      Easiest way to know is to break out the multimeter and measure it when cold, then measure all the resistances again once it gets hot enough to misfire. Both the original ignitor and the J Replace version. Factory service manual will have the spec for the terminal measurements.
×
×
  • Create New...