Jump to content
SAU Community

Recommended Posts

Can anyone confirm this?

I have been insured with CGU through EBM brokers for the last year and today I went to query them on my policy renewal and they reckon CGU is no longer doing import cars and they will have to search for other insurers.

So far they have got "Torque underwriters" I think. Anyone heard of them??

And a $300 dollar increase on the policy too, great!

No crash, no claims, higher premium. Damn this import game really sucks balls.

Any feedback would be good, and other recommendations handy aslo.

$1300-ish I am looking at paying at the moment.

Cheers,

tAy

Link to comment
https://www.sau.com.au/forums/topic/58800-cgu-no-longer-insuring-import-cars/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Yeah Niz, I'm pretty sure once your policy expires CGU won't renew it.

EBM/CGU are pretty good, although my policy expires in less than a week (much less) and they hadn't bothered to inform me of these changes until I called them up today.

Doing the big quote fest right now. Hopefully I can keep the premium around the $1000 dollar mark which seems to be the going rate.

insurance contracts act states you require 2 weeks minimum notice on changes to the insurance companies policy in the form of a derogation notice in your renewal.

did you receive a renewal??

EBM or CGU should have sent you a renewal at least 2 weeks before the renewal

i think you could be entitled to free cover hmmmmm free cover larghalarghalargha

contac the ICA insurance council of Australia and ask them what the deal is with no advice of changes from CGU or EBM cos they are essentially the broker and your insurance company

I didn't get any renewal but I knew it was due so I double checked and the called them. Hmm Ok I'll do some investigations, see what I can come up with. Free insurance cover....tell him his dreamin'

If you didn't have a policy with them and tried gettin one then no good :) I used to be insured with them bout a year ago and sold my old r33 and then only just bought another one bout 4 months ago and was told they don't do them anymore.

They got bought out by sgio. my broker told me that they will not insure any imports at the moment .

hbf will though and are quite cheap. downside no boost controller or no aftermarket ecu :P

try hbf

DON'T!!!!!

The insurance policy is not worth poo. They took over 6 months to get my car back on the road. I had to argue with them to get the repair done properly. After selling my car they continued to direct debit my bank account for several months and then had the gall to ask me to prove I had sold the car!

They might be cheap but, their insurance is worse than paying for repairs yourself, at least you don't have to wait 6 months.

The joys of havin a 4 door...................$895 Insurance even covers my GF (under 25). :looney:

4 door r33 $750 Unique Car Insurance for $18,000. Stay away from HBF. Was with them for 2 years, unblemished record and then they wanted to stick it to me.

Then they had the gall to phone and query if I was renewing after I had told them that I was going elsewhere. The dumb bitch asked who I was insuring with and when I told her and how much I had been quoted, she said that they would match it. Yeah right. $uck on this.

Unique are pretty good with mods also. Don't know what they are like with the youngsters.

DON'T!!!!!

The insurance policy is not worth poo. They took over 6 months to get my car back on the road. I had to argue with them to get the repair done properly. After selling my car they continued to direct debit my bank account for several months and then had the gall to ask me to prove I had sold the car!  

They might be cheap but, their insurance is worse than paying for repairs yourself, at least you don't have to wait 6 months.

ive already had an 8k claim with them previously , choice of repairer who i new so no problems with the work , no issues with the claim , done in a couple of weeks .

but insurance companys can be like that i guess , hot and cold

ive already had an 8k claim with them previously , choice of repairer who i new so no problems with the work , no issues with the claim , done in a couple of weeks .  

but insurance companys can be like that i guess , hot and cold

Sorry mate but, I have to rant here.:P

HBF have no idea what a quality repair is believe me I know. They don't supervise the repair at all. They send an assesor out, he screws the repairer down usually on the quality of the repair materials used, approve the claim and walk away. Good if you break an indicator lense, bad if you have major panel work and engine repairs. You might get your car back in two weeks ( I would have ) but, you'll have more bog than metal in your car and be worse off than you started with the mechanicals.

I had choice of repairer also, infact my brother worked at the shop. What they attempted to do to me they would have got away with if it wasn't for the fact that I am not the average customer. I actually have a technical understanding.

I would find it hard to believe the repair you got was with anything but second hand parts and lots of bog knowing HBF. I got mine repaired the way I wanted too , only after pointing out the legal position they were in and after an independent engineers report.

If anyone is prepared to do what I did for a claim to be propperly repaired go HBF, you will get what you pay for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...