Jump to content
SAU Community

Recommended Posts

  • Replies 153
  • Created
  • Last Reply

Top Posters In This Topic

rb20 injectors are 14ohms, gtr injectors are 4 ohms hence 10 ohm is needed

I=V/R

12V / 14 ohm approx 10 ohm resistor + injector (4 ohms)

= 0.857A

P=VI

12V X 0.857A

=10.3 Watts

same as everyone else, 10W and 10 Ohm

Edited by Rolls

rb20 injectors are 14ohms, gtr injectors are 4 ohms hence 10 ohm is needed

I=V/R

12V / 14 ohm approx 10 ohm resistor + injector (4 ohms)

= 0.857A

P=VI

12V X 0.857A

=10.3 Watts

same as everyone else, 10W and 10 Ohm

Thanks for that mate.

How did you guys go about getting the car to run with these injectors? On the first page it sais the car may not run at all, I have a re tune booked but wanted to install these before the tune but if the car wont run with them then its gonna be kind of hard to get the car to the tuner?

edit : also i have a safc 1 installed already so is there something i can do here to make it run well enough to get it to the tuner? im trying to save a bit of cash by doing some things my self but the next tune is just for the bigger fuel pump, i wanted to get the gtr injectors in and maybe even my z32 AFM as i wont have the money to get these done by the tuner on the day.

You will almost certainly have to trailer the car there, if it runs it will be horribly rich and no doubt foul the plugs and stall multiple times, I wouldn't bother trying to drive it. If you change the AFM as well then forget about it, definitely will not run.

Edited by Rolls

This is prob a stupid question, but why can't you just replace the standard injector resistor on the rb20 with the rb26 one?

You can, but most people sell them for $100, so if you can do it yourself for $10 why not?

Also the standard one doesn't use a resistor as they are normal impedance.

Edited by Rolls

Its just that i saw this ebay auction which lead me to believe that the rb20 did have a resistor. Just out of curiosity what actually is this part?

http://www.ebay.com.au/itm/Nissan-Skyline-R32-RB20-RB20DET-Injector-Resistor-/360376003973?pt=AU_Car_Parts_Accessories&hash=item53e8156d85

hey mate ive just acquired some 33gtr injectors to go into my rb20 what resisters did you use? as i want to make one as well.

10W 10ohm from Jaycar, cost like $11 for 6 of them

Have since found a better range of boxes to house them at Altronics

As for getting the car to run I have NIStune and a Tuners license so I can get it running well enough to get to the tuners, will be a couple more weeks till I kick it in the guts though (pipes to be welded).

  • 4 weeks later...

Its just that i saw this ebay auction which lead me to believe that the rb20 did have a resistor. Just out of curiosity what actually is this part?

http://www.ebay.com....=item53e8156d85

Its a resistor for something else and not to the injectors as it only has 2 wires

  • 9 months later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...