Jump to content
SAU Community

Recommended Posts

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

not this one :)

Yeah, I was watching most of the afternoon nursing a massive hangover in the shade (under the big grand stand) and your car looked like it was only puting out 50% if that. Any problems on the day?

Troy, did you have a skid mark at the end of the front straight? I saw you brake a lil late on one lap and left a puff of smoke, was it a close call?

Not so good watching as driving, really started getting depressed half way through the day thinking about my baby all sick at home (car that is)

....

Troy, did you have a skid mark at the end of the front straight? I saw you brake a lil late on one lap and left a puff of smoke, was it a close call? ...

 

Oops, thats two people that saw that:) Snowman told me of the first time he went flat down the straight only too find that he was too hot for turn 1...lol, well that makes two of us:)

If i didnt lock up i would have gone close ot hammering thru turn 1, but because i pinched the brake i ran a bit wide onto the grass:( So wast really that big a moment except for the fact that it was my first flying lap and i flat spotted the front left tyre leaving me with a bad front end vibration all day:(

Was the brake lock up that bad/smokey, it didnt feel too bad, but i suppose the physical evidence i left behind tells the whoel truth:)

Its got a horrible vibration now, and its really bad under brakes...lol i drove the rest of the day on it and it was ok, it wasnt down to the canvas or anything:)

Yeah, I was watching most of the afternoon nursing a massive hangover in the shade (under the big grand stand) and your car looked like it was only puting out 50% if that. Any problems on the day?  

...

I had some *ahem* temp issues and brakes going away issues...

In the morning session 4 laps was all it took to get oil to 120 (with a cooler) and water to 110...

Plus when I was on the front straight in the morning we had a *moment* coming up on that red maserati where he was braking, I was braking... and he was slowing down faster than me... I pushed the pedal harder... and got... nothing. All I saw was dollar signs coming up towards him but he turned in just in time :) I on the other hand had the GTR sideways on the far ripple strip trying to wash of speed like a crazy bastard :P

In the arvo went out for one warm up, 2 flying and one cool down and by the end of the first flying (turn 1) I had no brakes again :rofl:

How did you go with your times marcus?

I think I did something like a 1:38? Funny that last time I went out with less power and farked suspension I did 1:33... :Oops:

As I keep saying, car is capable of sub 1:30, it's the operator who isn't!

Have you upgraded your pads and used racing brake fluid?

Sounds like you have cooked the pads and boiled the oil.

I had some *ahem* temp issues and brakes going away issues...

In the morning session 4 laps was all it took to get oil to 120 (with a cooler) and water to 110...

Plus when I was on the front straight in the morning we had a *moment* coming up on that red maserati where he was braking, I was braking... and he was slowing down faster than me... I pushed the pedal harder... and got... nothing.  All I saw was dollar signs coming up towards him but he turned in just in time :( I on the other hand had the GTR sideways on the far ripple strip trying to wash of speed like a crazy bastard :rofl:

In the arvo went out for one warm up, 2 flying and one cool down and by the end of the first flying (turn 1) I had no brakes again :)

I think I did something like a 1:38? Funny that last time I went out with less power and farked suspension I did 1:33... :Oops:

As I keep saying, car is capable of sub 1:30, it's the operator who isn't!

Did anyone take photos on the day, or have links to a website with photos?

I took a few photos but mainly just of the crashed ferrari.

attachment.php?attachmentid=34797&stc=1

attachment.php?attachmentid=34798&stc=1

attachment.php?attachmentid=34799&stc=1

Mustang sliding around the final corner.

attachment.php?attachmentid=34800&stc=1

Roy's car being towed off the track.

attachment.php?attachmentid=34801&stc=1

attachment.php?attachmentid=34802&stc=1

That's why you should buy Castrol SRF :P

Hey Al, Castrol SRF was in mine on Sunday and still cooked 'em :Oops:

I was running Endless CC-X ceramic carbon pads, and Nismo braided lines with Cusco brake cylinder stopper. Last time out at sandown was running RB74s and cooked them too, with Motul 5.1 fluid.

I believe that I have done as much as possible with the existing brake setup, and that my brake issues stem from the tiny disk so will have to look at alternatives

;)

Why did Troy get towed off?

Yeah, Troy, why did Troy get towed off?? Didn't tell me that part did you?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...