Jump to content
SAU Community

Recommended Posts

  • Replies 102
  • Created
  • Last Reply

Top Posters In This Topic

Actually the RB26 i had in it for the weekend blew, so the RB20 is going back in for this weekend, far stronger motor at the numbers im pushing:)

And it wasnt fuel, it was a popped intercooler hose:( Its time i get it fixed, as the same pipe lets go every track day:(. it was on the 2nd last lap of the day so didnt bother me:)

And i agre with Marcus. My car is lighter, has bigger rotors, MOtul RBF600 fluid with Comp 9 pads and they struggled. I thought they were fading but it turns out i was just braking too late...once i got my braking points sorted the car stopped pretty consistant, but the blue hue to the rotors shows they were incredibly hot...flat out the place is just hard on brakes:(

hahah was this in the arvo after the rain? once it rained i went home... did many people get back out?

can't belive he ran out of fuel - lucky his engine didn't go bang!

Did you have fun on the way home, i was in the red R33

How did you go with your times marcus?

Anyone know what times the Silver SS commodore ended up with?

John wasnt it? I was speakign to him about his CSC brae upgrade. The thing had 300rwkws (maybe it was flywheel?!??) and he said he was struggling in the wet. He didnt mention a lap time though.

I wonder when Maserati will put up the lap times, i was using my lap timer to record mine, but if the Maserati people time me just 1/10 quicker then ill be in the 1:29s and ill take that time thankyou:)

What did i get, im in Adelaide and wont see them until next week:(

Did they give me a tenth or two for tryign so damn hard:)

Troy arvo sessions, in decreasing order (not running order) - 1:30.64 / 1:32.37 / 1:32.65 / 1:33.20

They were all your times in the 1:30's in the arvo :)

Cool... it looks like the hand timed laps match up pretty well.  In the only dry session in the morning did they have me as a 1:30 or 1:29? (crosses fingers)

1:28.54

...hang on, actually I made that up... sorry.

I don't have the results at work

:)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...