Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 2 months later...
  • 1 month later...

Past \"Hot Topic"\ Sticky Threads


13.4 second 1/4 for your 'stockish' R33. (A how to guide).

Project: 12sec Daily Driver R33 GTS-t

Whats is G-Reddy E-Manage?

Low RPM Stalling Saga in your Skyline - Possibly Sorted

Oil control in RB's for Circuit/Drag/Drift



General Questions Topics

Free Boost Mod

What mods to do first???

DIY 100,000km Service

Upgrading Fuel pump? Dont forget to increase Voltage

$22 Boost Controller

Auto --> Manual Conversion Questions

R33 GTS-t Flat Spot Fix

Mis-Fire under boost?

Fixing a leaking BOV

Backyard Race Fuel

Resetting the Stock ECU

Nissan Patrol Clutch - does it fit my skyline?

Poor Fuel Economy - O2 Sensor

PowerFC Software

PowerFC FAQ

PowerFC DIY Tuning

PowerFC - Road Tune

NISTUNE - All information

Emanage - Everything you need to know

450-500HP turbo, Internal or External Gate?

ECU for my AUTO
ECU for my AUTO #2
ECU for my AUTO #3


z32 AFM Install
z32 AFM Install #2

RB30DET(T) into a GTR

Consult LCD Display

RB25 turbo onto RB20DET - Exactly what is needed

Spark Plugs - Types, Gaps, Duration

Metal Head Gaskets

Intercoolers - Everything from A-Z about them






Engine Bolt-On's and Upgrades


Forged Piston Discussion

RB26 - Dump/Front Pipes

GTR Injectors into RB20

External Wastegate Sizing

Upgraded Fuel pump - Correct voltage is essential

$350 Turbo - 250rwkw (RB25DET)

Manifolds

Front Facing Plenum Install - Full Writeup

Garrett GT30 Thread - Full Writeup





RB26DETT

HKS T04R

HKS T04Z

JUN 2.7ltr Stroker/T04Z

First set of Turbos, many options

300-340rwkw A guide for your RB26




RB25DET

RB25 Dyno Results

HKS 3037 on an RB25

HKS 3040
HKS 3040

RB25 Flat Spot



RB20DET

RB20 - 200rwkw, how too

GT28rs (discopotato)

260rwkw+ RB20 Club

RB20 with RB25 Turbo/Cam Gears - Results

RB20 with RB26 Cams



Before & After

RB25 - Dump pipe

Ex Cam Gear - Before/After

R33 GTS-t SMIC Upgrade to R34 SMIC

Edited by Scott Black
  • Like 2
  • 2 weeks later...

Hi guys just thought i would post a couple of videos with the little mods i have done

Only mod i had done before these was when i boosted the stock turbo to around 11 psi

This is when i took off the old exhaust and before i installed the 3" exhaust

This is when i installed a 3" turbo back exhaust

My cousin had a VL High flow turbo that i decided to put in, with a few mods we made it fit.

i had to get a new oil line ($120) made, because my dump pipe from the turbo to the cat was 1 piece i had it get that modified to suit the VL dump pipe ($250 exhaust mod), had to find the a VL dump pipe and saw a few days earlier that one sold on ebay for $80 but after 1 day of searching on a friday and having to have the car running over the weekend i ended up buying the only i could find for $300 and all the extra piping for the intake and in-between the compressor housing and intercooler which worked out to be around another $50.

Total spent $520 plus what ever my cousin wants for the turbo which he said he paid around $500 which apparently was run for a round 5000km's and rated to 25 psi.

A lot more turbo lag in 1st and 2nd it wont start boosting until 3000 rpm but 3rd gear and over it boosts well. Only running it at just under 8 psi it is significantly faster then before. the night i left i raced another r34 and he told me he had a 3" exhaust and he had boosted it to 10 psi, he had me on take off but as soon i started boosting there was clear winner :) …… it wasn't a proper race it was like a slow rolling start but you could clearly see the improvement.

This was just me taking of from a friends house

Now i really want a FMIC and probably need a fuel reg can anyone recommend brands?

my cousin also said he has a O2 censor that goes to lcd screen so we can work out how much more we can boost it safely……………….does anyone know a safe limit to boost it too once i get an intercooler assuming i have enough fuel being available?

  • 8 months later...
  • 1 month later...
  • 9 months later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...