Jump to content
SAU Community

Recommended Posts

Hey Guys,

After reading a lot of the threads around here, a lot of poeple have put a lot of emphasis on getting the oil changed as soon as the car arrives before driving it.

After owning several imports, I have driven cars that have come into the country and have not had the oil done, and havent had any problems. I know that most import car dealers dont change the oil in the cars once they arrive..

But how concerned should I be about the oil in the gtr, considering the car has been sitting dormant for 6 months? Assuming the car is running well, I was going to drive it from the compliance center in brisbane to gavin wood at the gold coast to get all the fluids and a service done before I get it registered.

is there much risk, would anyone get it towed instead?

i personally got mine towed and as soon as it arrived i changed every fluid possible. I cant see a problem as long as the engine oil isnt black and thick as a mofo. I know many ppl who have driven from docks or from here to there without changing fluids yet and have had no problems so its up to you.

I didn't worry about driving mine....of course I do now have a blown engine.

Surely you would just drive it to the complier and do the oil change straight away? Just don't give it any on the way from the dock

I drove my car from depot, to my house, around a bit to show my mates, to compliance and back. maybe 200kms. Then i changed the oil.

It's really an unknown, you don't know when the oil was last changed, then you have to factor in for the car sitting in dealership, at docks, on boat etc. usually the car will be sitting idle for 3-6 months.

Oil will go bad over time, even if car is not driven, which is why oil change intervals is "5000kms or 6 months whichever comes first". So, worst case scenario, assuming owner properly maintaned it, was that it was just due for an oil change when it was sold, so 9-12 months without oil change.

I personally wouldn't worry about it, just open oil cap, and feel oil, if it's smooth and doesn't smell burnt, then keep it, if it's gritty or smells burnt, then get it changed. just take it to a local mechanic - dont bother changing filter. then when you do proper service, change filter and put decent oil in.

i'd just do the change yourself, it's a 30 minute job, and will cost you less than $50, if you have a mate nearby where you're picking it up, just do it at his/her place.

Its a risk that you take which personally in something like a GTR I would be avoiding.

Is it really worth risking an engine rebuild for the sake of being able to have a quick spin in your car when it arrives?

No.

Just check it.. I didn't change mine for about 2 months, even when it got here (although I didn't drive it much). The exhaust will probably smell like crap because of the old oil, but once you change it, should be back to normal.

But wouldn't be fanging it. If the oil has broken down over time, it's only likely to get worse when booted.

don't be a tightwad. you own a GTR FFS. nothing is going to be cheap. an oil change on a car that realistically hasn't had one for 12 months should be a pleasure, it will cost you only $100 and you can do it yourself if you want. mate, if you are tight on engine oil, things are only going to get worse from here on in.

once you've done that look at doing all the other fluids too (or at least test the clutch and brake fluid to see how much water they've absorbed).

i dont think its a case of him been tight man i think its just the pleasure and ease of actually driving it rather than paying for a tilt tray to gavin woods.......

and if he is taking it to gavin he's not a tight ass anyway so i think he just wants to take her for a maiden voyage :( go for it i rekon as long as u check the level of fluids and that the oil hasnt gotn totally bad i rekon youll be okay....(just dont fang it)

personally i rekon a good drive and a bit of heat and then dump the oil os the way to go because it will loosen up any bits that have settled and theyll come out with the oil and change it then your set :)

mmmgtir: Hmm, what WHITER32 said..

I would have actually thought that by letting the car idle for a few minutes, and then being very gentle with her the whole way, get some heat through the old oil before dropping it out the bottom.

Is there a definite risk I can blow up my engine simply by having old, broken down oil in the car?

I probably wouldnt be taking it over 4,000rpm until the new oil was in it.

i think oil will break down from getting too hot and been too old and copping a flogging before just sitting for 6 months or so would make it break down... you look at how long some of the q fleet and govt cars sit around sometimes and cars at some yards before they sell i bet they dont change the oil because they have been sitting for 6 months or so... sure they get started every now and then but thats not going to stop oil breaking down....

put it this way... if i was you and i was going to baby it and i just wanted a drive id drive it...

im going to drive my new silvia home from the docks about 2 hrs drive as long as the fluid levels are ok and it runs ok...

but remember in the end the decision is yours because if anything happens (which i honestly doubt) youll have to pay to repair it.....

Hows this for a comparison -

Would you drink a old stale beer thats been left open for 6 months on a warf/ship, absorbed all sorts of shit out of the air etc or would you rather wait for a nice cold one, even if you have to wait a extra day or pay a bit more for it?

Food for thought

Personally I'd tow it........

Might get away with a quick check of the dipstick, if it looks reasonable then it may be ok to drive, over just take a jack and change it before driving it

Might pay to take a jerry can of petrol too :rant:

Would you drink a old stale beer thats been left open for 6 months on a warf/ship, absorbed all sorts of shit out of the air etc or would you rather wait for a nice cold one, even if you have to wait a extra day or pay a bit more for it?

err.. no :Oops: when you're desperate for a beer, you're desperate for a beer.. ! hehe

It is a 15 year old GTR and going what others say about the condition of their GTR just tow it as Chris32 said, a tow is a lot cheaper then a engine rebuild.

I have know cars to make it 14 klm's from picking it up and another engine blew due to the tune of the HKS computer leaned out to much.

We bring cars in and are fully checked in Japan by a mechanic at his work shop with even photos of the dipstick showing the detail they go to and we still dont drive the vehicles till they have had a full fluid cange and service.

Tilt tray or rebuild and I have known of a car being written off going from docks to workshop and of course no insurance.

I towed my GT-R from the docks to the compliance centre. Most people thought I was nuts since the drive was so short (docks --> Grey Imports = 5 minutes MAX) but as everyone else has said, the $55 bucks it cost to tow it was nothing compared to

a) the purchase price

B) the cost of an engine rebuild

c) the cost of maintaining a GT-R

Keep in mind that the car will be extremely low on fuel too, which will mean you will have to stop for fuel and refill: if your car is highly tuned you might have the issues DRIFTT described.

Edit: I did have to drive it between the docks proper and the steam cleaning place though. That was about a 5 minute drive (because I had to find where to go). I kept it to 3000RPM and below, taking it extremely slowly.

LW.

  • 2 weeks later...

WOW, did had no idea about all this oil implication!! Ive imported 6 cars already, all had no problems except for one which may explain y.

In fact ive imported a 300zx and was stored in japan for over 10 months and after compliance i drove like normal not changing oil 2000km later.

But with my other 300zx i thrashed it all the way home, 20km drive, and the more i drove the car days later the crapper it felt. Then one day it didnt start at all!!

Lucky i saw this thread cos i got a 400hp R33 coming and not knowing all this i would have given it a good flog home.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...