Jump to content
SAU Community

Recommended Posts

have a read of the latest SPEED magazine.

says 99.3% sure of being a 3.5 ltr v6 turbo based on the VQ35 engine. aim is for 300kw, awd mainly taken from the R34 gtr.

that was the good news from nissan in the uk.

nw the bad nissan US will be getting a n/a V8 gtr and Australia if it gets the GTR will be getting the V8 as nissan US is the parent comany to Nissan Australia.

worse it will be a 6 speed manual (kewl) or a 4 speed auto (yuk)

Link to comment
https://www.sau.com.au/forums/topic/7000-more-r35-gtr-rumours/
Share on other sites

Taken from Auto Express:

----------------

----------------

British Call The Tune On New GT-R

It's set to be Japan's fastest and most advanced supercar - but look under the skin and it's Britain's brains which will power Nissan's new GT-R!

Exclusive pictures in the current issue of Auto Express magazine show how the new supercoupé will look when it storms on to our roads, and the cutaway detail reveals the technology which is set to make it the most advanced car in the world. But it's not only Nissan engineers who can claim the credit - our sources say British legend Cosworth has been called in to help tweak the engine, while Lotus is involved in fine-tuning the suspension.

The 'International Specification' GT-R, which will be sold throughout the world for the first time, is set to get a version of the 3.5-litre V6 engine used in the 350Z coupé, but will have electrically assisted twin turbochargers to boost power without sapping too much energy. Cosworth's expertise will be used to make sure the V6's block, head, pistons and crank are all strong enough.

Nissan knows it has to do something really special with the next GT-R, partly because the 350Z performs so well, but also as it's the first globally oriented version of the car, and expectations are high among the 'Playstation generation' of buyers who are familiar with the model from video games consoles.

The company has asked for around 400bhp and 490Nm of torque, but more realistic figures given emissions regulations are 350bhp and 450Nm. To reach production, the car must meet strict Euro4 exhaust regulations. The V6 will be mated to a six-speed Getrag gearbox, with a CVT due a year after launch in early 2005. The auto is undergoing final development, but apparent slippage trouble due to the excessive power has been plaguing prototypes. Insiders have confirmed the GT-R will incorporate an updated version of Nissan's Atessa 4WD system with an active limited slip differential. This new arrangement means torque is distributed between the front and rear wheels not only in response to traction loss, but also as a result of changes in the engine's output.

The FM platform used in the new range of Skyline and Infiniti G35 coupés in Japan and the US is basically good enough, but needs some fine-tuning to handle the extra power - and that's where Lotus comes in. A new hydraulic active suspension system, co-developed with Lotus, will feature. The Norfolk firm's expertise in this area will ensure the car handles like no other GT-R before, and can satisfy the soft-riding expectations of American buyers with the traction and high-speed handling required by the British and German markets.

Its brakes promise to be special, too, with larger Brembo discs controlled by a newly revised brake-by-wire unit which promises to give the sporty feel and feedback enthusiastic drivers demand.

But while the dynamics are groundbreaking, many fans will be disappointed by the looks. Although the car is clearly linked to the 2001 Tokyo Motor Show concept, some of the more aggressive touches have been watered down in favour of a more mainstream appearance. The final production version will debut at next October's Tokyo event.

Peter Lyon

-------------------------

-------------------------

From what I've read elsewhere, there is little to no chance of the R35 being released locally. The 350ZX will be Nissan's sports "marque" for Australia and what they'll be pushing at the top of their range for wow factor. Nissan hasn't had much of a good run in Australia over the last few years. You never know, if the ZX sells very well, they might consider a limited run of Skylines for Australia again, but the chances are slim.

Its back to the import scene, although now we're probably talking 150k+ for an R35 GT-R and I don't imagine too many people going for that. The level of affordance for the everyday buyer just won't be there. Its more moving up into the porshe, etc pricing area to match the performance.

My thoughts anyway.

I will be very dissapointed if the new GT-R is a n/a or does not have a turbo... I think without a turbo and the round back lights its just no GT-R. I think nissan should stop stuffing around and build the car upon the previous GT-R's and not make another shocker like the now 'Z' car...

hmmmm....depends, to me the GT-R is pretty dead..or at least when it does come back it will be in a totally different form..because it won't be an RBxx engine. Its always going to happen sooner or later.

To me, its all really to do with emission guidelines and things, which are of course much tougher in Japan, Europe, US, and other parts of the world to Australia. In a way they've had to totally re-engineer new engines from the ground up to meet all emissions and push them forward into the 21st century. Of course with that has to come changes in the power, or the creation of that power.

More speculation is that if it does come here it will only be the n/a V8 auto. Australians' preference for auto cars these days and the small market means we won't get both. The auto will only come with the V8 (that's the word at the moment). It would be marketed as a luxury coupe like an SC430 I would imagine, not a Porsche beater. :(

Whats wrong with the new 350Z then? I think its a wondeful car! I testdrove the Nismo 350Z demo car the other day and its much more fun to drive than a 996 carrera. I think Nissan knows exactly what to do with the V35 GT-R and I'm sure they will not screw it up.

Sure the RB has gone, nothing much anyone can do about that. Keep in mind that the first generation of GTRs had the N/A inline 6, then the second generation had the RB26DETT....now its time for the third generation, so we shouldnt really be scared of a new engine.

From all the info I have gathered the GT-R will be sold world wide. Unfortunately I can only recall the US, European and Japanes markets being mentioned, nothing on the Australasian ones....so no idea if it will be sold officially downunder.

I personally have faith in Nissan. I know they will not dissapoint their loyal GTR customers!:(

  • 8 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...