Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Gareth - here's a special picture for you.

DSC_0192.jpg

In some senses you may be slightly lucky. Here's the lines from the black rex and you can see where he's hit.

DSC_0187.jpg

Now at Sandown if you hit a wall you will be billed for repairs to the wall because they can't have any structural damage. Now from memory they cost is about $800 per panel to repair. And those bills are the last thing you need after a non insured accident.

Ok - if you want to see exactly how it happened in real time clicky on the link!

http://users.net2000.com.au/~mrwhite/carnage/Sandown carnage.mov

If you'd like a link that works: http://users.net2000.com.au/~mrwhite/carna...own_carnage.mov :D

I'd like to see the few seconds before the clip shows, what they were doing before they lost control. The vid only shows them once they have lost control. Painful to watch :P

Agreed....in the case of the wrex appears to be a rear-end lose through the fast left-hander at then end of the back straight. Probably got in too hot, had the line wrong, etc, etc GTR probably the same but had almost recovered it - then run out of room. You become a passenger once its on the grass :(. As someone else said, _very_ lucky not to have rolled it.

A few years back someone did some fairly substantial re-arrangement of the armco at Sandown (may have been a John Mott event) and was presented with a fairly substantial bill just to add insult to injury.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...