Jump to content
SAU Community

Recommended Posts

Hey all.. Just went in to my local Autobarn for some hose and enquired about brake pads for my S2 C34 Stagea and "it just so" happened that they had a set of Bendix ones, the are DB1170's but looking here I think they may have given me the wrong ones? Can anyone confirm if DB1170's are right for a 2000 model Stagea?

Hey all.. Just went in to my local Autobarn for some hose and enquired about brake pads for my S2 C34 Stagea and "it just so" happened that they had a set of Bendix ones, the are DB1170's but looking here I think they may have given me the wrong ones? Can anyone confirm if DB1170's are right for a 2000 model Stagea?

1. Return shitty pads

2. Order remsa pads from GSLRallysports (sp?)

3. Fit remsa pads

4. ?????????

5. Profit

Yeah I took them back, turned out to be bloody 200sx pads or some shit... Just gonna order some cheapy QFM ones from gsl

Remsa is only $10 more than the qfm hpx and are supposed to be a bit better again

Either way you can't go wrong

Dust?

As far as I'm concerned; if brakes don't dust up, you can't really expect anything to special out of them.

They are a bit dusty, nowhere near as dusty as TRW/Lucas pads, but if you had white wheels; well, you wouldn't anymore... Having said that; it just washes off with soapy water.

In any case, with slotted rotors, you have to expect some dust.

That's why my wheels are painted Toyota Tungsten, and not white. :ninja:

As far as I'm concerned; if brakes don't dust up, you can't really expect anything to special out of them.

They are a bit dusty, nowhere near as dusty as TRW/Lucas pads, but if you had white wheels; well, you wouldn't anymore... Having said that; it just washes off with soapy water.

In any case, with slotted rotors, you have to expect some dust.

That's why my wheels are painted Toyota Tungsten, and not white. :ninja:

Ah. I remember when I had white wheels.

But alas, that was two weeks ago, when I last washed it.

  • 3 weeks later...

For some of you who had fitted an R34gtt calipers and rotors(front only) on to their PNM35/NM35, can you tell me how much you had to grind off on the bottom steering knuckle/hub to clear the rotor? to stop it from rubbing. When I trial fitted my calipers and new rotor from r34gtt it rubs on the dust shield and the offending knuckle/hub. And when I tightened the wheel nuts on the rotor I can still slightly spin the rotor, so this indicated to me that only a few mm will need to be gring off? Obviously dust shields will need to be trim as well.

For some of you who had fitted an R34gtt calipers and rotors(front only) on to their PNM35/NM35, can you tell me how much you had to grind off on the bottom steering knuckle/hub to clear the rotor? to stop it from rubbing. When I trial fitted my calipers and new rotor from r34gtt it rubs on the dust shield and the offending knuckle/hub. And when I tightened the wheel nuts on the rotor I can still slightly spin the rotor, so this indicated to me that only a few mm will need to be gring off? Obviously dust shields will need to be trim as well.

They clear the knuckle fine; it the dust shield that is the issue.

I cut the dust shield away almost completely; if you rotate the wheel with everything fitted you'll get a witness mark on the dust shield. Cut a couple of mm inside the mark.

Either that or measure the id of the back of the rotor, and transfer that dimension onto the dust shield. Cut accordingly.

They clear the knuckle fine; it the dust shield that is the issue.

I cut the dust shield away almost completely; if you rotate the wheel with everything fitted you'll get a witness mark on the dust shield. Cut a couple of mm inside the mark.

Either that or measure the id of the back of the rotor, and transfer that dimension onto the dust shieldy. Cut accordingly.

Yeah I rotated the rotor and it scored the dust shield nicely so i can cut nicely around it. The new rotor will also need to be skimmed before it gets fitted on. The r34 back ID rotor is alot shallower compare to the stagea rotors. It just Im not sure how much is needed to grind off the knucke. Will it weaken it? It seems ARX-four maybe has a different offsets or knuckle/hub assembly?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...