Jump to content
SAU Community

Stagea Brakes

Sydneykid
 Share

Recommended Posts

  • Replies 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

chuckie
chuckie

IT is in a 1700KG WAGON & one built in 1998, with 298 mm Rotors ,just wonder off & play please .

Daleo
Daleo

We really are lucky to have you here to tell us how it is. Where have you been all my life? Also; Tyres, not tires. Welcome to Australia.

scotty nm35
scotty nm35

You put Bendix pads on a Brembo setup? Sacrilege...

Posted Images

FIA510 Contributor

FIA510

Posted
Posted

Which rear twin piston calipers run the 14mm bolts as against the 12mm R33 rears.

I tried to swap the R33 calipers to the rear of my M35 & found the bolts too small. (12 >14mm) Looking for a cheap upgrade for the rear brakes.

Are the R34 GTR rears running the 14mm bolt ?

M35woah Rising Star

M35woah

Posted
Posted

Which rear twin piston calipers run the 14mm bolts as against the 12mm R33 rears.

I tried to swap the R33 calipers to the rear of my M35 & found the bolts too small. (12 >14mm) Looking for a cheap upgrade for the rear brakes.

Are the R34 GTR rears running the 14mm bolt ?

I think someone on the forum makes a sleeve for the bolt so that they can run other brakes?

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I make the sleeves, but that won't help you run the 33/34 rears on your M35, they have a different spacing and won't fit without an adapter bracket. Either just run the fronts, with the stock rears, or find some 350z Brembo rears, as they bolt on.

stevennnree Contributor

stevennnree

Posted
Posted

Hello everyone I'm selling my Brembo brakes they come off a 350z so they bolt straight onto the m35 they come with brand new dimpled and slotted rotas and brand new bendix brake pads for 1300 if you have any inquiries don't hesitate to contact me on 0412638517

  • 3 weeks later...
StageIan Rising Star

StageIan

Posted
Posted

I'm in the process of installing R34 front calipers coupled with 300mm DBA Rotors.

The standard M14 bolts off the stagea fit but were only grabbing 1/3 of the thread so I ordered R34 bolts.

When fitting the calipers up I noticed the were fouling on the front of the rotor.

I believe I am missing the spacers that slip over where the bolts fit.

Duncan Grand Master

Duncan

Posted
Posted

I'm in the process of installing R34 front calipers coupled with 300mm DBA Rotors.

The standard M14 bolts off the stagea fit but were only grabbing 1/3 of the thread so I ordered R34 bolts.

When fitting the calipers up I noticed the were fouling on the front of the rotor.

I believe I am missing the spacers that slip over where the bolts fit.

have you got a pic? do you just mean the bolts are too long and go through the hub and then all the way to the disc? If so, replace with a shorter bolt (any bolt shop should have something to match, even Bunnings might), just make sure it is grade 8.8 or higher

StageIan Rising Star

StageIan

Posted
Posted

have you got a pic? do you just mean the bolts are too long and go through the hub and then all the way to the disc? If so, replace with a shorter bolt (any bolt shop should have something to match, even Bunnings might), just make sure it is grade 8.8 or higher

Having trouble loading pics atm, bolts I have are fine in length.

The part that is fouling on the Disc is the inside/front of the Caliper where the disc feeds into it.

There is like 5mm clearance for the disc when I mount the calipers.

I'm starting to think I have mismatched the discs.

StageIan Rising Star

StageIan

Posted
Posted

? 5mm clearance is not fouling!

Hey Bob, I just re-read my previous post.....5mm should be plenty 2.5 mm either side, if the rotor was centered with the caliper, but thats not what I'm getting.

The inside face of the caliper hits the front face of the rotor, it doesn't sit centered like it should.

All the pics of R34 calipers I have found dont show any type of spacer like the standard stagea calipers. The spacer fits between the hub mount ahd the caliper where the bolts fit.

Anyways, gonna give it another try this week end, maybe I don't have the rotor pushed in far enough, I'm thinking if I fit the wheel and tighten the wheel nuts it will bed the rotor as far in as it will. Remove the wheel and try fitting the caliper again.

Duncan Grand Master

Duncan

Posted
Posted

Yep it really sounds like you have the wrong disc for the caliper, ie the offset of the disc to the hub is incorrect.

If it is out by a mm or 2 and I couldn't return/replace the discs I would space it out with a washer (in fact the d2 kits come with shims for that purpose)

StageIan Rising Star

StageIan

Posted
Posted

Yep it really sounds like you have the wrong disc for the caliper, ie the offset of the disc to the hub is incorrect.

If it is out by a mm or 2 and I couldn't return/replace the discs I would space it out with a washer (in fact the d2 kits come with shims for that purpose)

Thanks Duncan, I originally thought about doing this but the washers I had were way too thick.

I'll have another dig around in my 'random stuff' box and see if I can find some thinner washers to suit & hopefully post up some pics for good measure..

StageIan Rising Star

StageIan

Posted
Posted

OK, so I have confirmed I have the incorrect rotors for my caliper set up.

I was originally told the calipers were R33 calipers and with this info ordered rotors to suit.

I have since found out that the bolts are M14 indicating they are R34 calipers........DAMMIT

The rotors are at best 300mm x 30mm - the pads only partially cover the disc.

I need 310mm x 30mm, time to dig out the invoice and see if I can return them and swap them out for the correct rotors.

Very frustrating seeing as the stagea has been on stands for over 2 months now, I just want this done so I have a car while I get the mazda's issues sorted.

Looking like at least another week before I get this sorted

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...