Jump to content
SAU Community

Recommended Posts

Anyone able to tell me how 18x9.5 +22 front and rear would go on a 32 GTS-4?

If anyone's running that or similar on their 32, what tire sizes are you running and how much work if any was needed on the guards?

  • 2 weeks later...

if you know the offsets of your current rims, go here http://www.1010tires.com/WheelOffsetCalculator.asp and it will tell you how the other rims will sit relative to your current ones

Found a photo of a 33 with D1R's at 18 x 9 +32 which look fine

Used that tool suggested above and seems the 8.5's will sit 10mm further in the guards....

Thats not to bad I guess unless I just get 9's all round

Thought there was a difference between the position of the front and rear hub, but I guess not. Theres a fair few people running Identical wheels front and back that look fine

Thanks for that tool pistol-pete, good enough to work out from the photo i found how it will look :blink:

might find the offset for my wheels and check out comparison for them to when i find the time

look for my car 18x10 + 20 rear

front is 18x9.5 +15 w/ +25mm front fenders or look for hamish (joeyjoeyjoe's) car he is similar specs to what yo are after.

to answer your question is yes it will fit, yes you will need to roll and probably pull fronts a bit yes will look good

Hmm not sure of current offset might check it out another day

If +30 is flush for 9's then I dont mind if they sit 5mm in the guard if that's true lol

Found a photo of a 33 with D1R's at 18 x 9 +32 which look fine

Used that tool suggested above and seems the 8.5's will sit 10mm further in the guards....

Thats not to bad I guess unless I just get 9's all round

Thought there was a difference between the position of the front and rear hub, but I guess not. Theres a fair few people running Identical wheels front and back that look fine

Thanks for that tool pistol-pete, good enough to work out from the photo i found how it will look :)

might find the offset for my wheels and check out comparison for them to when i find the time

I have D1R in 18x9+32...they sit flush at front, but the back could be spaced out about 15mm or so...might be worth going 9.5 in the rear? I'm going to buy spacers for the rear. Doesn't look bad as it is though, unless you're one of those hella flush people who have to have to have the guard rubbing tyre before it is considered cool :banana:

Will need to roll guards if you're sitting lowish though...I kept scraping when cornering.

Hey everyone,

Looking at ROTA G-Force 18x9 5x114.3 wheels in gunmetal

Would a +27 offset fit? I was recommended by ROTA for the +27s, but i was told by tyrepower that my guards would need to be rolled with +27s, and that i should stick with something from a +30 to +40 offset, so i was initially going to go for the +35 offset on those ROTA's

Anybody know which fits better?

Thanks everyone

Hi Guys, I have read a fair bit of this topic but am still struggling to figure out what offset etc to get. I want to get a set of TE37's in 18's for my R33gtst. It only has coilovers and isnt crazy low and I dont want to roll the guards or anything like that. What would be the best width and offset for the front and back? I know it depends on what sort of look you want as well , i just want something that sits neat in the guard if you know what I mean. Thanks for the help.

Hi Guys, I have read a fair bit of this topic but am still struggling to figure out what offset etc to get. I want to get a set of TE37's in 18's for my R33gtst. It only has coilovers and isnt crazy low and I dont want to roll the guards or anything like that. What would be the best width and offset for the front and back? I know it depends on what sort of look you want as well , i just want something that sits neat in the guard if you know what I mean. Thanks for the help.

Roll the guards - it doesn't hurt in anyway. You can go 9" front and 10" at the back +30 to 39 for both front and back which would be fine

Hey everyone,

Looking at ROTA G-Force 18x9 5x114.3 wheels in gunmetal

Would a +27 offset fit? I was recommended by ROTA for the +27s, but i was told by tyrepower that my guards would need to be rolled with +27s, and that i should stick with something from a +30 to +40 offset, so i was initially going to go for the +35 offset on those ROTA's

Anybody know which fits better?

Thanks everyone

27s are fine you might need to roll your guards but thats no big deal. back i wouldnt think need rolling depending on your ride hieght you can go much lower offsets too.

Hi Guys, I have read a fair bit of this topic but am still struggling to figure out what offset etc to get. I want to get a set of TE37's in 18's for my R33gtst. It only has coilovers and isnt crazy low and I dont want to roll the guards or anything like that. What would be the best width and offset for the front and back? I know it depends on what sort of look you want as well , i just want something that sits neat in the guard if you know what I mean. Thanks for the help.

look for dezz he had te's on his 33 and try find sizes they sat exactlty as your asking but i dunno what specs or pm him .. either way. id suggest something along th lines of 9+30 (f) and 9.5 +15 ® should be safe could go slight higher if offfset if your worried like +35 front and +20/25 rear

Roll the guards - it doesn't hurt in anyway. You can go 9" front and 10" at the back +30 to 39 for both front and back which would be fine

look for dezz he had te's on his 33 and try find sizes they sat exactlty as your asking but i dunno what specs or pm him .. either way. id suggest something along th lines of 9+30 (f) and 9.5 +15 ® should be safe could go slight higher if offfset if your worried like +35 front and +20/25 rear

Thanks guys much appreciated. I'll post what what I end up getting which may be awhile becuase I want TE37's in black which are proving to be hard to get unless I order them brand new. Thanks again

Cale

Vehicle: 1992 HCR32 GTS-t

Wheels: Work Emotion XD9

Sizes: 18x9+20 front and 18x10+18 rear

Tyres: Bridgestone Potenza GIII's 235/40/18 fronts and 245/40/18 rears (minimal stretch)

Guard modifications: Fronts - mean fitment/no rubbing, rears - rubbed shitloads until we rolled and flared the rear guards. now barely ever rubs unless i go over a big bump on the road at over 70-80kms

Height: Slightly above legal limit

Comments: Front didn't change much in terms of camber etc but rears cambered in a little and produced a bit of toe-in once we dropped the jack. never got around to buying a camber/toe adjustment kit but it didn't feel like it affected the cars handling very much so i didn't bother.

Pics are in my signature/blog page

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...