Jump to content
SAU Community

Recommended Posts

Found this...

18x9.5 +15

post-16535-0-03996200-1311747147.jpg

post-16535-0-17972900-1311747172.jpg

Not what i'd call a "dick load", some camber and you'd get em under. Depends what you're after exactly. RPF1's are the shit though, and worth the effort. They look good on anything.

Theres more here in this thread.

http://www.sau.com.au/forums/topic/372204-r32-gtst-fitment-pics-please/

Edited by R31 drift pig

And you forgot the part where he says it doesn't have camber arms etc, so some camber and suddenly they're not sticking out.

2.5 - 3 degrees up front and a smidge in the back and done. Dynamic camber will take care of the rest.

Be pretty silly to put them on and not put in a decent alignment.

Cheers for the replies.

Wanted to go 18s in the RPF1s but dont think they have anything that will fit the 32 or without them going ummm concave out wards if that makes sense. feel they look ugly going that way

So my choice, i think my only choice are 17x9 +22 all round?

Will these be ok? any other choices?

Skyline model = R32 GTR
Wheel diameter = 17
Wheel width =9
Wheel offset =+22 TE37
Tyre size =255/40/17 nankang ultra sport NS II
Modifications to fit = none

003XetH.jpg

rear:

z9R1kBf.jpg

front: kind of sunk in

YjLzbXy.jpg

Erxv6Au.jpg

*Looks 10x better than above setup.

Skyline model = R32 GTR
Wheel diameter = 18
Wheel width =9.5
Wheel offset =+12 Advan RG
Tyre size =265/35/18 Advan AD08R
Modifications to fit = light fender roll. Just the lips, nothing more. A few degrees of camber could also maybe fix the problem. I am not sure of my current specs.

Front:

RnPzL4z.jpg

Rear: Perfectly flush

ostZl4r.jpg

ZAihvJ9.jpg

DzD09LO.jpg

WG4gf0O.jpg

hTAkKuW.jpg

Edited by JTCC
  • Like 1
  • 3 weeks later...

Recently came across this car while browsing on a used car trading website in HK. I understand the pictiure is kinda grainy, but could anyone make out the approx wheel and tire specs on the car? Also does anyone know what brand of wheel it is. Looks good imo. Thanks!

post-141346-0-22857500-1445483485_thumb.jpg

Edited by roy2535

Hey guys I've got my mind set on Enkei's RPF1's in 18's. I'm having trouble finding what offset I need and I don't want to roll the rear guards. Also I want the correct tyre sizes because I want a functional setup.

It's asking for a lot, but I want it to be perfect.

Edit: 18x9's all round be asking too much?

Edited by Dan93

Damn no good. Those tyres will be too skinny.

At the moment it's got 17x8.5's on the front with 235's I think and 17x9's on the rear with 255's.

No idea on offset, but you can get a slightly angled finger in between the rear tyre and guard.

It all comes down to usage/what you want.

End of the day you can get a better 235/40/18 that will grip more than a 255 for the same price due to the common size discount.

I ran 235 NT05's, low with a decent sussy setup (6/8 coils, camber bushes, pineapples, sways, hicas lock) and had traction right through second with 330rwkw

I don't like the idea of a tyre being smaller than it should be. I obviously want it to look good and tyre fitment needs to be spot on. I'm not worried about paying more for a wider tyre.

What kind of power are we talking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
    • Hi Jasmine. How's the war going?
    • I'm extremely suspicious of the VPP stuff. Best I can tell, you surrender any and all control of your panels and battery to the VPP, because there's no way that anyone could write a sufficiently useful set of "rules" as to how much you would be willing to let out of your export meter at any given time. If one of your main interests is to have enough in your battery every evening to get you through the night without having to import, you could easily find yourself with nothing in your battery at the end of the day, or part way through the night, and then be paying import pricing instead of paying nothing. I cannot see how this cannot come to pass.
×
×
  • Create New...