Jump to content
SAU Community

Recommended Posts

just for your information, gary...

both times i recieved items they were sent with toll priority

they actually screwed me around both times. first time i was home and they didn't ring the bell and jsut left a note. then they wouldn't deliver when i was home next so i had to go pick them up form the depot

second time, i hadn't recieved anythign, so called them about the consignment number you ave me. they claimed that they came 3 times and no one was home. but, i was home each time, no doorbell was rung. no note was left. slack barstards. so again, i had to pick it up from the depot.

toll priority = lazy as shit

i recommend changing couriers for future deliveries in your group buys

regards

Warren

There is only 1 (yes ONE) set of R32GTST rear Bilsteins left in stock at Bilstein. There are no shipments planned and there is no production schedule. So when this set is sold I will close the Group Buy.

:/ cheers :)

are they sold yet Gary?

Gary,

I would like to buy the following if still available

1. Front and Rear Bilstein shocks and Whiteline springs

2. Bump stops and dust covers to suit.

This car is predominantly street driven but I enjoy tacking it to the drag strip every so often. Will this setup be ok for the strip or am I better off replacing the springs/shocks for periods where I plan to drag race. The car currently runs an Rb25 with GT35R but will soon be replaced with a built RB30 so I will be looking for good launches at the strip.

Sorry, tried to PM but your inbox must be full.

Will make full payment on Monday if the stock is still available.

Thanks for your time.

Best regards,

Ben

hi sk i am after a set of shocks with bump stops for a r32gtr can you advise avail and price del tp sunshine coast qld 4556 thanks

PM sent, prices are in the R32GTR Group Buy thread

:thumbsup: cheers :laugh:

just for your information, gary...

both times i recieved items they were sent with toll priority

they actually screwed me around both times. first time i was home and they didn't ring the bell and jsut left a note. then they wouldn't deliver when i was home next so i had to go pick them up form the depot

second time, i hadn't recieved anythign, so called them about the consignment number you ave me. they claimed that they came 3 times and no one was home. but, i was home each time, no doorbell was rung. no note was left. slack barstards. so again, i had to pick it up from the depot.

toll priority = lazy as shit

i recommend changing couriers for future deliveries in your group buys

regards

Warren

Hi Warren, I am sorry that you had problems with Toll. There have been well over 100 deliveries on the suspension Group Buys and yours is the only complaint I have received. Nothing, not a single package, has gone missing and everyone has been very happy with Toll's service. So I can only suggest that your particular local Toll courier is the exception. The rest of them have done a pretty damn good job.

:thumbsup: cheers :laugh:

Gary,

I would like to buy the following if still available

1. Front and Rear Bilstein shocks and Whiteline springs

2. Bump stops and dust covers to suit.

This car is predominantly street driven but I enjoy tacking it to the drag strip every so often. Will this setup be ok for the strip or am I better off replacing the springs/shocks for periods where I plan to drag race. The car currently runs an Rb25 with GT35R but will soon be replaced with a built RB30 so I will be looking for good launches at the strip.

Sorry, tried to PM but your inbox must be full.

Will make full payment on Monday if the stock is still available.

Thanks for your time.

Best regards,

Ben

Yep, I have been away In Canberra since Thursday. So at 30 to 40 PMs a day, my inbox fills up pretty quick.

The Group Buy kit was engineered (by me) to give a sporty ride for the street and at the same time suite the sorts of things that Skyline owners use their cars for (road drag and circuit). It a great all round kit. I have done an 11.9 at 120 mph with a 1.8 second 60' on a Group Buy kit in the R34GTT. So I don't see a problem using it for occasional run down the 1/4.

PM sent with prices.

:thumbsup: cheers :laugh:

Sorry, this Group Buy is closed for shocks as there is no more stock of rear R32GTST Bilstein. I will re-open it for shocks when the next shipment is confirmed.

The other items (springs, bushes and stabilser bars) are still available however.

:( Merry Xmas to all at SAU :)

  • 2 weeks later...

Sorry guys I have been on holidays since the 20/12, I will get around to the hundred or so PM's over the next few days.

No news from Bilstein Germany on the rear shocks production, I will post it here when I do. All other items for R32GTST's are available.

:) cheers :(

Garry,

Can you please let me know when you get front shockers for R33 GTS4 so I can buy the whole package As I told you in PM,

*Both front and rear shocks + front & raer springs + Dust cover & Bump stops + standerd strut tops....

Garry,

Can you please let me know when you get front shockers for R33 GTS4 so I can buy the whole package As I told you in PM,

*Both front and rear shocks + front & raer springs + Dust cover & Bump stops + standerd strut tops....

This is the R32GTST thread. Better to watch the R33GTST thread and that will tell you when the Bilsteins have been cleared through customs. I am in Melbourne from Sunday to Thursday and may not have internet access for much of that time.

:laugh: Cheers :laugh:

This is the R32GTST thread. Better to watch the R33GTST thread and that will tell you when the Bilsteins have been cleared through customs. I am in Melbourne from Sunday to Thursday and may not have internet access for much of that time.

:P Cheers :(

Oops I moved to r33 gtsts thread as you said Garry. :P

Hi all. I have decided in light of purchasing the kit to do a review of the overall characteristics and my honest opinion of the kit as i have noticed no one has done so yet specifically on the R32Gts-T.

Being a young bloke, i was 16.5 (im 19 now) when i first bought my Skyline. That sed, the car came reasonably standard, with only 3 inch exhaust all the way through, coilovers, and some rather large rims. On first approach, the excitement of owning your first car seems to overwhelm your intuition as i soon realised some of the problems with the suspension. I have had 2 sets of Coilovers in an attempt to get the ride i wanted. Tein Coil-overs and HKS-Hipermax-D coilovers. These coilovers have their great attributes, however in my opinion the negatives far outweigh the positives outcomes. The Harsh, bone shattering ride of the Teins seemed to do nothing but either spin the wheels when the power was put down, or bounce over any bump larger than a minor divit in the road. It was uncomfortable and unefficent. In the attempt to rectify this i went for a set of HKS' which had fully adjustable dampening. An upside i thought at the time as i cud adjust the "harshness" of the ride. Once installing them, they were only marginally better than the Teins, and even more so seemed to promote more understeer than the Teins when going for spirited drives through some of the hills around my area.

I did some searching round, and finally came upon this group buy. I read through the posts and listed the upsides and downsides of the kit. However really you were hard pressed to find many downsides. The only one i could find is degree of resolution(difference between smallest increments of adjustment) of the Bilsteins isnt quite as fine as the coilovers. A mere trade off for legality (coilovers are generally illegal without modifications). If you wanted just a "set and forget" suspension height then there really is no use in these japanese coilovers and you are not utilising the adjustability. Everything else in the kit really had no downsides. Upgrading sway bars for example is a well known way to cure many handeling problems, upgrading bushes to a aftermarket polyurethane or the like is a known way to minismise the "looseness" in a chassis' handeling characteristics. So on an so forth.

So i decided to go ahead with the kit. After purchasing, everything was delivered to my door no hassles.

The kit was installed. This included, bilsteins all round, whiteline springs all round, whiteline sway bars front and rear, whiteline camber (front and rear) kits, whiteline castor kit, whiteline subframe alignment kit, and i had already had front and rear strut braces.

Initially, hopping in the car and taking her round the block, you notice (going from coilovers) the ride is smooth, subtle, and on the whole an enjoyable ride. Every part does its job the way it should.

The bumps are soaked up in the shock and spring, rather than being passed into the chassis with the coilovers. The sway bars do the work of minimising body roll instead of using rediculous spring rates to attempt to cure this problem. The bushes minimise the "squirm" of teh chassis upon turn in and hard cornering loads rather than trying to do this via the stupidly high spring rates. Coilovers would be a reasonable option in Australia if all our roads were perfectly smooth and minimal immperfections were apparent. But both you and i know this is not the case.

This kit has transformed my car without a doubt. Driving it most days (i go to uni so finacially its not feasible to drive everyday) its a comfortable ride. Firmer than stock, but at the same time its "nice" type of firm. It feels surefooted and allows you to have confidence in the car. Something in racing (i race Sprint Karts) that is without a doubt paramount to having a quick car. I know i wont be racing this car, but when on these spirited drives it does help to feel confident in the car that it can handle what you will throw at it. If your going to be driving your car everyday, or even "every now and then", this is the kit for you as its an awsome performer in all fascets you will drive your car in. SydneyKid has done the time testing this kit on the road, and i have no doubt that every member on here will vouge for him that he does know what he is doing and he does what he does well. How many other kits can you find that have the extensive testing and development this one has? Youd be hardpressed to find any more than you can count on your hands.

Anyone looking at buying this kit to replace stock suspension, or replace coilovers, I URGE you to at least talk to Gary(SydneyKid) bout this kit as its probably the best money you will spend on your car over the period of owning the fine automobiles Nissan created. I know this is a bit long, but thanks for listening and i hope at least a few of you take the time to look into this groupbuy.

Cheers, David

Edited by R32Abuser
Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...