Jump to content
SAU Community

Recommended Posts

So you guys have heard from Matt??

yeah, as i was saying a few posts back... if there are supply issues from Germany, unfortunately it can take a while. Basically something along the lines of they won't make SK's shocks specifically, they have to like tack on the order onto a bigger order. SK did mention something about it near the beginning of the thread.

Sorry you guys had to run into the Bilstein issue

  • Replies 322
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

So you guys have heard from Matt??

yeah, as i was saying a few posts back... if there are supply issues from Germany, unfortunately it can take a while. Basically something along the lines of they won't make SK's shocks specifically, they have to like tack on the order onto a bigger order. SK did mention something about it near the beginning of the thread.

Sorry you guys had to run into the Bilstein issue

You mean they won't send SK his shock order as it is not big enough?

Then does that mean all Bilstein Skyline shocks come with SK's specs from Germany? even though they may not be sold through SK? e.g. through other Bilstein suppliers such as Fulcrum/Quadrant/Heasmans?

So you guys have heard from Matt??

yeah, as i was saying a few posts back... if there are supply issues from Germany, unfortunately it can take a while. Basically something along the lines of they won't make SK's shocks specifically, they have to like tack on the order onto a bigger order. SK did mention something about it near the beginning of the thread.

Sorry you guys had to run into the Bilstein issue

Well, the following parts were missing from my order:

KCA348 Front Camber kit $183.00

KCA347 Rear Camber Kit $123.00

KCA349 Rear Subframe alignment kit $105.00

Not sure if the supply issues from Germany would affect me..

Plus i was given part KCA332 instead of KCA331 thats listed in the first post - can anyone confirm whether im supposed to get part KCA331?

I ordered to full kit and paid in May, didnt get my parts until July only to find out im missing a few parts. It is now September and i have not received any form of communication from Matt or Gary...its getting ridiculous. Its funny how before i paid i had no problems getting replies from Matt/Gary, but as soon as i pay then all replies ceased...

If anyone has any contact numbers or emails for Matt/Gary, could you please PM me

So you guys have heard from Matt??

yeah, as i was saying a few posts back... if there are supply issues from Germany, unfortunately it can take a while. Basically something along the lines of they won't make SK's shocks specifically, they have to like tack on the order onto a bigger order. SK did mention something about it near the beginning of the thread.

Sorry you guys had to run into the Bilstein issue

I'm not sure why you keep mentioning 'Sydneykid's bilstein specs' ... the shocks from what I understand are just the normal Bilstein shocks. What Sydneykid does is, he orders the extra circlip groves so that the car can be lowered and provides some specs that you should aim for with the help of caster/camber kits and wheel alignment...

I don't think there's anything special about the shocks themselves though, someone correct me if i'm wrong.

On another note, can all the people still waiting for their goods please contact me by PM?? I'd like to know just how many people are in the same situation now and what was the excuse you were given?

I was told (mid august or so) that the delay was due to "Bilstein engineer was on holiday for 2 weeks" which sounded like a really stupid excuse that made no sense to me. So I'd like to know what excuse everyone else has been given, if any.

I'm running out of patience and WILL take this guy to court unless I get my money or the product soon or atleast some sort of reliable ETA.

Edited by Delta Force

sorry, i got things backwards a bit. They are probably a 'not ordered much' bilstein shock, whatever the model # that fits the R34, but then i think an engineering company here Oz re-valves the shocks to SK's specs. I can't be assed, but it's somewhere near the beginning of the thread. I think that's how it works. so normal shocks from germany, then revavled in oz

so, no, i don't think you can get these shocks anywhere else in oz

sorry, i got things backwards a bit. They are probably a 'not ordered much' bilstein shock, whatever the model # that fits the R34, but then i think an engineering company here Oz re-valves the shocks to SK's specs. I can't be assed, but it's somewhere near the beginning of the thread. I think that's how it works. so normal shocks from germany, then revavled in oz

so, no, i don't think you can get these shocks anywhere else in oz

I have heard otherwise from other sources.

Can Gary/Matt confirm this?

Are the shocks delivered these days from Germany already valved to your specs? just simply circlip grooved here?

I understand that a few years back they used to get revavled here in Australia when delivered from Germany. However, now all Bilstein R34 (and probably most Skyline ones) shocks sold in Australia come valved to your specs as they come in.

OK lets stop stuffing around people. Contact Matt and Gary here if you have issues with stuff not being delivered etc.

Superior Suspension

4 Lincoln St Minto NSW 2566

(02) 9603 0100

Thanks vidospace.

I've spoken to Matt, looks like my order is ready they're just waiting for the shocks which should be in this week hopefully.

Now that wasn't so hard .. that's all I wanted, to speak to someone and find out what's going on rather than be ignored for weeks and weeks.

We are currently suffering from out of stock on some springs, some alignment products and some shocks absorbers, which is holding up about 20 deliveries, some for over 6 weeks. So we haven't been taking new orders, it's not fair on the guys who are waiting on their stuff. Springs are gradually arriving, they are made in Europe, so delivery takes time. The bush production is getting back on stream after the amalgamation of the Noltec and Whiteline alignment products, the new combined range is called Whiteline Plus. Some are due this/next week. That leaves us with a few kits that will be waiting on selected Bilstein part numbers. I am on the suppliers case daily as many of the guys are, understandably, getting impatient and they send multiple PM's every day, this fills up the inbox faster than we can reply.

It's a temporary situation caused by a number of unrelated issues, once we are passed that we will take some new orders. The bonus is there are a number of new and improved products that we will be able to include in the various Group Buys.

Cheers

Gary

Hey mate, couple of questions u might be able to answer.

I have a R34 GT-four, I brought nismo front and rear sway bars (R34 GTT), the rear fits fine but the front seems too big for the clamp that goes around the bush. Would i need a R34 GTR sway bar, or could i use a whiteline sway bar?

The front has R33 GTR cusco caster arms, and looks like GTR lower control arms.

Also the rear subframe alignment kit, what are the bushes made of?

Thanks Luke

nope, spoke to Matt on friday and was told he's gonna take the missing shocks from someone elses order which was still missing some other parts and ship it out to me on fri or today .. didn't happen, again.

OK just called them and a pallate of springs has finally arrived. They believe I will have everything by Friday. We will see....

  • 2 weeks later...

The shocks are apparently "trickling in" so they get one set every week or so. There are 3 or 4 people still waiting on R34 suspension including myself.

Deltaforce has recieved his stuff now which is good news. And apparently I am next on the list

:P

Hey Sydneykid, not sure if you remember me and our tlaks about my RB26DETT build in my Silvia, well that project is still in the making but I have since sold my S15 daily and bought an R34 GTT. It came in about a month and a half ago and I want to change out somt suspension stuff on it for new items. Can you give me some advice on how I should set it up? It is my daily and I may once in a while hit the strip, but my main purpose is to have a streetable setup that can corner well and have good traction. It came equipped with Nismo Coilovers and Nismo front tension rods, everything esle seems stock at the moment. I have been searching and came across your thread with the GTT bits. What you recommend and can you send me prices of items shipped to me. I have a slight noise that I have to check on the left rear side when going over bumps, sounds as if sometihngis loose, I am hoping maybe a slack coilovers top or maybe the rear subchassis bushings. I am thinking about dropping the entire rear end and replacing all bushings on the diff and the four rubber bushings and also upgrade the bars one time. Let me know what you recommend and prices shipped to me in Trinidad in the West Indies. My address is below for shipping,

Jason Jagdeo

c/o Citibank trinidad and Tobago Limited

#12 Queens Park East

Port-of-Spain

Trinidad, W.I.

TT.

Thanks,

Jason.

I tried Pming you but your inbox is maxxed so I just pasted it here, sorry.

just wanted to say that Heasmans are a bit of a rip off when it comes to installation of these kits .. I was charged close to $1000 for installing the shock, caster kit and camber kit (he said 8 hours??) and nothing else (not even springs) on an R34 GTT and they didn't even get the height correctly because both my front and rear are the same height now when the front is supposed to be 1cm higher...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...