Jump to content
SAU Community

Recommended Posts

Looks like I've got a VG20DET turbo coming, its a mild upgrade for the old RB20 - bigger than an RB20DET turbo, a little smaller than an RB25DET one.

If I can finalise my campus loan soon it might get more interesting, lol.

I have just gone for a Garrett GT30/40

Won't go in the car until about August (Tax return time :P)

With S/S High Mount

Probably a Tial Wastegate

Get it tuned at pro and see how the injectors hold up.

Predictions of approx 250 at the wheels on 14-15 psi.

Should be fun in a HR31

  • 5 weeks later...

Bit quiet on the home front eh? Well I should be recieving a new front driveshaft for my gts4, cant wait to get back in amongst it :laugh:

Although, had a bad day yesterday - came back to my car and some jerk had dinged it, on the good side too - previosly some filthy criminal tried to nick the wing with a screwdriver. The disrespect just makes me mad, we spend so much time and effort on our machines and then these little -Grr, insert profanity- decide that they would like to ruin something that isnt thiers. Bring back national service I say, ship the little buggers to Iraq.

Sorry for the rant (again) just a bit sick of this sort of shite.

  • 3 weeks later...

The Passage GT will be getting dyno tuned soon... Would love to see some good results, keep all the R31 boys smiling. I'll leave it alone for a while once this is done, its taken me long enough :laugh: Just mild upgrade for the little 2 litre, rb25 turbo, malpassi fuel reg, Trust 3" exhaust, apexi avcr, apexi safc 2, mines ecu, still on the *cough*factory intercooler*cough* hopefully will be around 160+rwkw once tuned on mild boost setting.

Edited by frigjam

Have just done my timing belt, water pump, tensioner and idler bearings, painted my timing belt cover :( and just fitted an R34 turbo (28,000km's) last night...

I will be fitting my GTR injectors and getting a Dump/Front pipe and a Z32 AFM very soon... (The will get it retuned by Dr Drift).

Also going to do a plug and oil change... think this stuff is too thick.

Hay Todd Just got the same parts for my R32, Rebuilt R34 Turbo 550cc Sards Z32 AFM Tomie cams and gears, Taking my car over to sams on the boat this week end to get are tune , I can not wait, keep you posted on how it go’s

Cheers Raymond

sweet dude! can't wait to find out!!

I am hoping for / expecting around 180-190rwkw...

I just got a new dump pipe from xrated so will be fitting that tomorrow! Now I just need to get the AFM and injector resistor pack!

I am going to wait for sam to come back down though, worth the wait to save the $$... would even be cheper to use someone elses dyno and pay for his flight! :dry:

Well my car was stolen last saturday night and they did some damage in the process.

I was lucky that they only got 100 odd metres down the road before being chased off by mr plod.

But the 2 damaged locks, the broken ignition barrel, broken rear quarter window and some other bits and piece's put the rebuild even further behind than what i was.

Have spoken to a certain Dr that is going to look into a new motor package for me which should see me back out and about (just have to come up with the cash) and also get that certain Dr behind the wheel at the next DrifTas event.

So i'll be hunting down some parts and also calling in a few favours in the next couple of months so i can hear that sweet sweet sound of limiter and gate :D

Other than that im looking for a job so if anyone can help me out let me know :D

Cheers GMB

what kind of work are you after B?

Sux to hear about the car, I hope (as I am sure you do too) to see it on the road soon!

I send the D.O.C and email but didn't get a reply yet! Am I right when I hear he may be back down soon and could possibly do a tune or two?

oh, and I just fitted an aftermarket dump pipe to my car tonight!! (ordered it off Justin 'XRATED')

goes well but won't be able to feel the full potential of it until I get new coils (sh*ts itself past 4g's!)

what kind of work are you after B?

Sux to hear about the car, I hope (as I am sure you do too) to see it on the road soon!

I send the D.O.C and email but didn't get a reply yet! Am I right when I hear he may be back down soon and could possibly do a tune or two?

ANYTHING really mate.

something that will pay the bills and i wont want to shoot myself out of bordem at the end of the day :D

Sam and Nick are flat out at the moment with a fair bit on.

Sam is planning on coming back down but not 100% sure about the dyno as yet.

Chance's of using another dyno are pretty slim after talking to a few poeple.

But both DrifTas and i belive Kamikaze are looking at doing something with Sam.

Either way there will be another tuning weekend in the next few months :D

Cheers GMB

Ha, well you won't want anything at my work if you don't want to have to shoot yourself... admin work is pretty boaring and the IT dept it all full :) getting sick of that too though! (there could be an opening soonish... shhhhhh ;) )

I can't wait for a retune!!!! All I need now are coilpacks, AFM and injector resistor pack!

ANYTHING really mate.

something that will pay the bills and i wont want to shoot myself out of bordem at the end of the day :D

Sam and Nick are flat out at the moment with a fair bit on.

Sam is planning on coming back down but not 100% sure about the dyno as yet.

Chance's of using another dyno are pretty slim after talking to a few poeple.

But both DrifTas and i belive Kamikaze are looking at doing something with Sam.

Either way there will be another tuning weekend in the next few months :D

Cheers GMB

Well after the car was stolen i have it home and have started to clean up the mess.

I need to get a few things (new locks and rear 1/4 and fix the ignition barrel) and pull the flat battery out charge so i have a working alarm again!!!

Once i clean everything up i will start pulling everything off/out to get ready for a new motor.

Then comes the decision to keep the car or sell and start with something else (new bike :()

I will have a few things for sale again mostly to suit R32 but will have both my turbo's and my new 2 way up for grabs as well.

Cheers GMB

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...