Jump to content
SAU Community

Recommended Posts

spose ill update lol,

new hks2530 was put in a month or so back same with bosche 040 pump.

have powerfc, injectors and z32 waiting to go in as well as an oil cooler/reloc kit.

new body kit is being worked on and nearly done.

suspension should be here soon..hopefully!

nothing happening to the rx7, but plenty on the mitsubishi side of things... the lancer will soon be ready for new paint.

the skyline goes into the bodyworks for tidy up soon too.

post-5400-1226035624_thumb.jpg post-5400-1226035640_thumb.jpg

  • 2 weeks later...

So...

- Now have a TT 5sp Soarer

- Have pulled the turbos off

- Am just about to fit TR43i, stainless manifold, 50mm gate, Walbro pump, FMIC and make custom exhaust and cooler piping

- Just shopping for an adj fuel pressure reg and ecu/piggy back

Also, just picked up our new family bus.

stagea1yw5.jpg

stagea2vo4.jpg

well pick up my car today with the new turbo fitted :) trail fitted the body kit side skirts and rear bar very very average fit :down: will be fitting bonnet tonight, so ill wait and see how good that fits

got the rx7 back with the engine removed! (was going to do it myself but no time at the moment and need to get things cracking if its gonna make the start line next season!)

will now strip the engine of all the crap on it and the gearbox then its off for freshening!

the engine bay is pretty tidy, but will clean it up and repaint.

got the rx7 back with the engine removed! (was going to do it myself but no time at the moment and need to get things cracking if its gonna make the start line next season!)

will now strip the engine of all the crap on it and the gearbox then its off for freshening!

the engine bay is pretty tidy, but will clean it up and repaint.

There will be nothing left if you do that Stu :)

I need a knock sensor to finish my car off :down:

well few pics from todays vist :D

Body kit fitment not to bad side skirts need a fair bit of work but front and rear just a lil trim here and there and will be a perfect fit,

few pics to give you a rough idea of what it will look like when finished :down:

DSC00677.jpg

DSC00679.jpg

DSC00681.jpg

DSC00682.jpg

Guess i better do an update on mine, it's sat in a corner of the shed since i picked it up from having the cage done, so this weekend i pulled my finer out and gave the inside a cleandown and started painting it. at this stage it won't be back on the road til jan, but hopefully before christmas. On another note, anyone interested in buying it?

post-25384-1227418248_thumb.jpg

post-25384-1227418363_thumb.jpg

post-25384-1227418459_thumb.jpg

post-25384-1227418585_thumb.jpg

^^^ love the bonnet and a nice choice of kit, 34's can look horribly wrong but that kit makes it look wider and neater.

GT-R made 270kw on 15psi and made 1547.3 n.m of torque.

will wind up the boost (around 22-23psi) next tune to see what i can get out of it.

^^^ love the bonnet and a nice choice of kit, 34's can look horribly wrong but that kit makes it look wider and neater..

thanks mate :thumbsup: well car is now fixed no more break down at 4600RPM coil packs FTL :huh: but all good now :ph34r:

Mines coming back together now. fitted new radiator and put all the loom back and other bits and peices that were removed for the respray. should be on target for a pre christmas finish. anybody got a interior carpet for sale?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...