Jump to content
SAU Community

Recommended Posts

spose ill update lol,

new hks2530 was put in a month or so back same with bosche 040 pump.

have powerfc, injectors and z32 waiting to go in as well as an oil cooler/reloc kit.

new body kit is being worked on and nearly done.

suspension should be here soon..hopefully!

nothing happening to the rx7, but plenty on the mitsubishi side of things... the lancer will soon be ready for new paint.

the skyline goes into the bodyworks for tidy up soon too.

post-5400-1226035624_thumb.jpg post-5400-1226035640_thumb.jpg

  • 2 weeks later...

So...

- Now have a TT 5sp Soarer

- Have pulled the turbos off

- Am just about to fit TR43i, stainless manifold, 50mm gate, Walbro pump, FMIC and make custom exhaust and cooler piping

- Just shopping for an adj fuel pressure reg and ecu/piggy back

Also, just picked up our new family bus.

stagea1yw5.jpg

stagea2vo4.jpg

well pick up my car today with the new turbo fitted :) trail fitted the body kit side skirts and rear bar very very average fit :down: will be fitting bonnet tonight, so ill wait and see how good that fits

got the rx7 back with the engine removed! (was going to do it myself but no time at the moment and need to get things cracking if its gonna make the start line next season!)

will now strip the engine of all the crap on it and the gearbox then its off for freshening!

the engine bay is pretty tidy, but will clean it up and repaint.

got the rx7 back with the engine removed! (was going to do it myself but no time at the moment and need to get things cracking if its gonna make the start line next season!)

will now strip the engine of all the crap on it and the gearbox then its off for freshening!

the engine bay is pretty tidy, but will clean it up and repaint.

There will be nothing left if you do that Stu :)

I need a knock sensor to finish my car off :down:

well few pics from todays vist :D

Body kit fitment not to bad side skirts need a fair bit of work but front and rear just a lil trim here and there and will be a perfect fit,

few pics to give you a rough idea of what it will look like when finished :down:

DSC00677.jpg

DSC00679.jpg

DSC00681.jpg

DSC00682.jpg

Guess i better do an update on mine, it's sat in a corner of the shed since i picked it up from having the cage done, so this weekend i pulled my finer out and gave the inside a cleandown and started painting it. at this stage it won't be back on the road til jan, but hopefully before christmas. On another note, anyone interested in buying it?

post-25384-1227418248_thumb.jpg

post-25384-1227418363_thumb.jpg

post-25384-1227418459_thumb.jpg

post-25384-1227418585_thumb.jpg

^^^ love the bonnet and a nice choice of kit, 34's can look horribly wrong but that kit makes it look wider and neater.

GT-R made 270kw on 15psi and made 1547.3 n.m of torque.

will wind up the boost (around 22-23psi) next tune to see what i can get out of it.

^^^ love the bonnet and a nice choice of kit, 34's can look horribly wrong but that kit makes it look wider and neater..

thanks mate :thumbsup: well car is now fixed no more break down at 4600RPM coil packs FTL :huh: but all good now :ph34r:

Mines coming back together now. fitted new radiator and put all the loom back and other bits and peices that were removed for the respray. should be on target for a pre christmas finish. anybody got a interior carpet for sale?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...