Jump to content
SAU Community

Recommended Posts

Camtech 272 duration 9mm lift cams, std rb20det with highflow manifold/turbo/exhaust :)

And Toffy unfortunately it isn't, im not quite there yet with that one, not far off though :thumbsup:

was going to install my safc today but didn't want to risk stuffing it somehow anyone know who can install & tune them? im going to give gt a call monday but wanted to know if there's anyone were else who can do it.

so instead i pulled all my ugly S1 interior out & put in the S1.5/S2 interior i got off petethumbsup.gif

Edited by Autumn33

fianly got a new core for my turbo. rebuilt it and fitted it up. hopefully be the last time i put a turbo on it for a while.

sold off my injectors to make way for some 1000cc jobies.

then to rewire it to tidy up the mess under the dash.

ive almost finished a super light loom for Pete Nunns car. ill be building a similar one for my car. we were able to make it around a third of the original weight. the loom i biult for Bens targa car was about half the original. maybe a bit heavier with the extra bits we needed.

once loom is done ill get a retune then some body work and it will be ready to enjoy.

ah you have to love cars.

.25 of a kg ha ha ha ha ha ha ha ha ah aha ha....

Don't eat dinner the night before... more weight saving! :nyaanyaa:

Ah i get this all the time. this joke is seriously old.

less weight is free power and free brakes. its simple phisics?

how do you think an rb20 powered r32 can lap basky in the times it does? no rb20 r32 has ever done it before? it doesnt have massive hp or belistic brakes?

its not the .25kg from one thing either its .25kg from everywhere.

its not possible to run Nos everywhere Justin. if it was it would probably have it.

sounds good. what kind of weight have you saved with the custom loom?

cheers

the original 32 gtst loom is around 25kg including all the small ecu and control units. bens targa car had to have a fair bit of stuff added over the top of what was stripped out plus it still runs electric windows and mirrors ect.

once you have stripped a car of the easy cheap to remove weights it is hard to find 16odd kg on one area that doesnt cost a bomb so we are pretty pleased with the result.

im yet to do a r33 so im not sure what the starting weight would be.

aparently the r35 has a tun of wiring weight but because of its complexity no one has tampered with it much.

uhhh rightio, good stuff. not something I'm going to worry about unless my wiring ever gives me grief. easy for you i guess as your a auto leccy. I still have a lot of easy crap to kick out so i better attack that first.

Ah i get this all the time. this joke is seriously old.

less weight is free power and free brakes. its simple phisics?

how do you think an rb20 powered r32 can lap basky in the times it does? no rb20 r32 has ever done it before? it doesnt have massive hp or belistic brakes?

its not the .25kg from one thing either its .25kg from everywhere.

its not possible to run Nos everywhere Justin. if it was it would probably have it.

Has Brad taken it to any other tracks? or is it fresh and soley setup for symmons atm?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...