Jump to content
SAU Community

Recommended Posts

Received my pipes today,

slight mix up when posting so I got a set without a flange but the guy was a champ when i rang him & refunded me the price of itthumbsup.gif

hopefully I'll get a chance to dummy fit them tomorrow thumbsup.gif

20120110143050resize.jpg

nice pipes mate :thumbsup: cut the inside off about 20 mill get some offset going :D

Howdy,

Couple of questions. I've got an Nm35 Stagea

Where's the best place to get an immobilizer/alarm installed? Do most of you buy a kit off ebay and then get a place like Hobart Audio to install it? I recently imported the car and it's come with an alarm (and maybe an immobiliser) but my insurer quoted that I needed an 'Australian Standard immobiliser,' which has me worried if it got knocked off.

Also, where's the cheapest place to get a dump and catback installed? I rang up Moonah Mufflers and Carline and the latter seems the cheaper for an install.

Cheers

best bet is to get onto some1 on here thats down thay way and is a wizz on the welder / tig and get them to do it / make one, the exaust shops will cost you 10x wat there worth :) i dont know any1 down hobart way sorry

I'm sourcing the exhaust and dump in SA and VIC from those that have already custom built them for the m35. Just need someone to install them.

I'll pop into Auto Addiction and see what they can do for me.Cheers

I'm sourcing the exhaust and dump in SA and VIC from those that have already custom built them for the m35. Just need someone to install them.

I'll pop into Auto Addiction and see what they can do for me.Cheers

I have no idea how difficult this would be in an m35 but I change the r33's exhaust over about once a month and am a self maintenance newb. I have a track exhaust which gets shoved on and then I have my stock one for normal driving, keeps the neighbours/police/wife happy ;)

Prop her up on some axle stands and have a good look how difficult it is, if it doesn't have a robotic goat under there bleating at you about safe sex you're probably going to enjoy doing it yourself. I'd be keen to help out (goat aside) if you want a hand, and I'm sure I can volunteer another few people off here too :)

I've been told that changing the dump on a m35 is not a fun task at all

I hereby retract my offer of help. Your goat is outside my area of expertise.

Go somewhere like here http://www.yellowpages.com.au/tas/kingston/kingborough-exhausts-12099199-listing.html

soo finaly got all my hids in ! LB is 10000K 35w kit and HB is 6000K 100W kit :) ill have to take a pic at night befor the std HB didnt make any diff oer the LB hids but now all i can say is it rapes signs and cooks ppls eyes thought id add a pic so you can see the diff the left side is with both hid kits if on :) if your a night driveing bandit like me i would get these 100w hids :) best thing iv ever done no more roo hitting because i didnt see them on the road

HID4-1.jpg

cut it from where the flange bend goes to the smaller pipe and weld the it back on? or you want it so you can swap at times?

Yeah i was going to do that but thought might be safe to have it so if i need to change them over i can thumbsup.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...