Jump to content
SAU Community

Recommended Posts

I was just up at Barbagallo raceway having a look at the HSV day. I saw this white R33 GTS-T (i thought).

I waited until he went out on the track and spotted twin pipes at the rear. Then he layed into it and i thought this sounds odd. He came around and nailed down the front straight. I just stood there mouth open and said SHIT. No blow offs, nor turbo whine nothing.

went into the pits and there it was dare i say it. a 5.7 litre V8 in a R33.

Has anyone heard about this car before, it was road reg but i can't remember the plates.

Also interested in peoples thoughts on this conversion

Link to comment
https://www.sau.com.au/forums/topic/91316-v8-skyline-gts-57/
Share on other sites

Its a street force car from a tuning workshop in Wangara. The LS1 being an all alloy block is actually lighter than the RB25DET motor itself which makes it an interesting conversion considering how much power one can make and how much off the shelf aftermarket parts are made for it now. All in all not a bad conversion

I would like to see a Ferrairi with a Windsor in it. It might do the 1/4 mile in forty secs with a windsor in it. quicker than standard.

I am sure there is a few WRX's out there that may be a bit bruised after meeting this thing on the street.

Yeah I remember seeing this car at the Burswood motor show a while back as well. Still can't decide whether I like it or not. They've even replaced the little 'GT' badges on the sides (underneath the indicators) with chevrolet badges.

"My cat's breath smells like cat food."

sorry to hijack your state :(

but vuster posted this car up in sau a little while ago with some build pics from the ls1 forum.

Its interesting, not alot of room for more pipework and twin turbo's in there, but im sure it could be done.

Nice car, but ... it has a gen 3 in it, nuff said ... *vomits*

Hey guys, I better start by saying that I have a bit of respect for the Gen 3, being that they can make a lot of power, but they don't have much tourque/power down low, the most important quality about a V8. . .

Although you can make a lot of power with one, you can make plenty of power/torque with a RB series motor anyway, so why bother?

I wouldn't be surprised to find they did the engine swap to annoy purists like me, cos there is just something fundamentally wrong with a V8 'Line, they have had sixes from the 60/70's onwards, and they have been great motors. . .

just my 2c . . . :P

Didn't see the other thread, but this is the workings of Brett from PSI performance from memory. Was actually going to grab the 25 that came out of this. The owner had the GENIII in an ss ute previously, had the 33 and decided to join the two so I was told... I really like the idea. Can't go past the feel of the turbo though. It's not really a "which would you prefer" thing though. Both would be a blast to own/drive...

Deano

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...