Jump to content
SAU Community

Recommended Posts

RS4s wheels are 17 x 7.5 +30 I just replaced mine recently. Don't have them anymore as I sold them so I can't be much help on the measurement side of things.

what are you running now and what are your clearances?

If you have a look on page 8 there is some pics of my car there with rims on it. In terms of fitment my guards are standard e.g. no rolling. The front outside edge of the rim is pretty much flush with the guard. The rear is in ever so slightly, maybe 10mm. On the inside I reckon I have close to an inch of clearance from the inside of the wheel to the shock body. The overall height of my wheels is near enough identical to the 215/50/17 inch tyres I had on the car before.

I could have my car alot lower without any clearance issues, I used to have it alot lower on my 17's but i kept scraping the underneath when going into the driveway and over speed humps so I raised it about an inch. Heres a couple of pics

(FYI I run Greddy coilovers so not sure how this would compare to standard struts).

post-39581-1250229527_thumb.jpgpost-39581-1250229603_thumb.jpgpost-39581-1250229643_thumb.jpg

im looking at buying a rs4s and ive got a set of rims in mind that are 19x8 with +35 offset, do you think i'll have issues? or will they sit too far in, eg look crap

it's probably pretty clear by now that my wheel fitement standards are a little more agressive than the majority of you blokes and that by my standards they really will look sunken to all buggery

look at petes white rs4s a few posts back, the wheels you are looking at will sit 39mm in from them :S inner clearance will be about the same

hmmmm

i just looked them up and it appears they will extend out further than the standard rims by an ENTIRE 1mm !!!

but the rims im looking at dont seem to be available in a smaller offset :(

anyone else running on aftermarket wheels that only just extend out or are the same as the standard rims??? .....with pics???

at the moment im looking at either Konig - Hotswap Silver or Vault Crystal, both are 19 x 8 with +35 offset. also considering the vaults in 20 x 8.5 +35 but im not sure if they will foul the strut

i know its been a long three or so years, most certainly glad to be back

i put down a deposit on the new stagea today

Great to hear Andy.

Mikey is going to help me fit something to the yellow pig soon....when they are in stock so if you want to come over and share a beer and wave your hands around and point while I flounder around you are more than welcome.

  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah that is not actually a lot. Just painting my GTR frontend and the little bits to make sideskirts/nismo flare pieces work correctly/fit on the sedan/mount up correctly came to about $7000. Is it a lot? Sure. None of this is economical. Economy would be shelling the car and buying a 2010 Corolla to commute in. The perspective of all of this is different.
    • I have the 2025 build re003s’ on my 06 XT Forester Turbo and I quite rate them for street wet and dry
    • I don't see any issues here. I've been saying all along this is a big job, the price reflects that.  When the car comes back perfect I'm sure it will feel like money well spent. 
    • Remember, take original quote. Double it. Then add a bit more. It's how any project goes.
    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
×
×
  • Create New...