Jump to content
SAU Community

Recommended Posts

R34 GTR rims are 18x8 +30 offset from memory. They should sit nicely in a GTT. I've seen a few GTTs running around with GTR wheels. If you are looking at fitting 18s on the GTT, anything at the front with offsets +40, +35 should fit assuming they are 18x8s. You will also need to check on front brake caliper clearance. I have tried two sets of +

35 offset on my fronts before one did not clear because it did not have high disk clearance. Jap wheels can be very tricky in this respect. Best advice is try before you buy...which can be hard when you are importing or buying second hand. I've learnt this the hard way :)

34 GTR wheels are 18X9 not 18X8. you may have some trouble with the fronts, but i'm not entirely sure. best way to find out is to see if you can try a pair on. With some low profile 235s on the front they will probably be ok.

34 GTR wheels are 18X9 not 18X8. you may have some trouble with the fronts, but i'm not entirely sure. best way to find out is to see if you can try a pair on. With some low profile 235s on the front they will probably be ok.

This is such a great forum and many experts opinion. Question is how is the alignment setting and whether the handling is effected compare with the stock standard rims or other after market rims? The design looks great and had offers for a set atm. One last question, if I change the GTT fenders to the GTR ones while still retaining the stock GTT bumpers & bonnet, will there be gaps during fittings? The GTR fender do balance the car up with the GTR rims and will not hit the inside while turning. The GTR bumpers are pretty low for everyday driving.

Thanks in advance for the pros....Cheers!

34 GTR wheels are 18X9 not 18X8. you may have some trouble with the fronts, but i'm not entirely sure. best way to find out is to see if you can try a pair on. With some low profile 235s on the front they will probably be ok.

Sorry my bad...18x9 :P

i have seen a 33 gtst with them in japan ( with stock 245x45x18 tyres) and i have a picture but not 100% sure if they will hit , probably hit the front inner guards . If you want to see the pic p.m. me your email and i will send it to you .

Just to confirm , they are 18x9 and +30 offset .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
×
×
  • Create New...