Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 155
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...

Another excellent caliper painting thread here:

http://www.skylinesaustralia.com/forums/in...p;hl=duplicolor

The paint schmiddy suggests is absolutely brilliant. Avoid VHT like the plague and use what schmiddy says. :)

good guide, but my main suggestion would be do not do it with the callipers on the car, and definately not with the wheels on the car. no matter how carefull you are there will be overspray. plus you really dont want to be painting them with pads and rotors, suspension etc all around. spend a little extra time and remove the calipers. :ninja:

good guide, but my main suggestion would be do not do it with the callipers on the car, and definately not with the wheels on the car. no matter how carefull you are there will be overspray. plus you really dont want to be painting them with pads and rotors, suspension etc all around. spend a little extra time and remove the calipers. :D

How would one remove the calipers? Hard? Easy? Someone (if they have time) post up a tut on caliper removing? Thanks!

How would one remove the calipers? Hard? Easy? Someone (if they have time) post up a tut on caliper removing? Thanks!

takes 5minutes...

- remove rims

- pull out wire clips from caliper

- remove 1 pin

- remove backing plate (prevents it flicking out)

- remove 2nd pin

- remove pads and shim plates

- undo 17mm (i think) nuts around the back.

- banjo bolts for brake line (make sure to have an empty bottle nearby to put the bolt in.

  • 2 months later...

to remove calipers ther are two 17mm bolts on the back us a 1/2 inch breaker with small extention crack it then use ur ratchet to take off. dont let the caliper swing on the brake hose..

the front su can turn the hub. get a rattlegun in ther and do it that way.. well u can on toyotas.. :(

i reckomend a die grinder to etch out NISSAN after u painted over it.. :(

Better than a die grinder is a piece of wet and dry and a cork block.

Just rub the paint back until you get a nice shiney "nissan"

But be careful, one touch of your nice fresh paint will piss you right off :D

  • 3 months later...

Yep,

Get yourself some Wet and Dry, quite fine grade.

Also, get cork or wooden block.

Wrap wet and dry around the wooden block and carefully sand back the paint.

This is exactly how I did it to mine. The Nissan come up looking brushed and it really makes the calipers look great.

i just removed wheel .. covered hub in news paper and wheel arches and side of car and sprayed in my garage with no wind ..

make sure u tape correctly and make sure you get all the paint off if you didnt mask the disc could smell funny or cause irregular braking which you obviously dont want

I used a wire brush on a drill.Went right back to bare metal.

The paint was great and still is quite good.the rears are pretty much as anodised red as they were when they were first done.though the fronts are faded due to track days and instead of being anodised red they have faded slightly.but still resemble the red colour.i will post up before and now shots tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi. This is just my curiosity because iam sure the tuner figure something out...but either way i want to ask. The "problem" is that the Nistune ECU (Stagea FW and RB25DET NEO from Stagea) sees many times the speed than the speedo does(he says the speedo show 120 km/h - correct speed and the ECU shows like 510km/h ) I told him that this car/tranny getting speed from rear diff. If iam not mistaken the RB25DET NEO "need" to see tranny speed sensor? (my tranny has the plug for it). So couple of "question" If he connects/wire the speed sensor to the tranny...are the signals gonna intervene and if...what if he disconnects the rear diff one and the speedo stops working? Or the "new" sensor from the tranny "take over" and will not going need the one from diff? As i said i know he figure/get that done...iam just curious to know what are the solutions 🙂 
    • Your IACV is set to idle too low. You need to adjust it via the screw Duncan mentioned. From memory it should be 650rpm with the valve electrics unplugged. What is it trying to idle at with the IACV plugged in?
    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
×
×
  • Create New...