Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 155
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 2 weeks later...

Another excellent caliper painting thread here:

http://www.skylinesaustralia.com/forums/in...p;hl=duplicolor

The paint schmiddy suggests is absolutely brilliant. Avoid VHT like the plague and use what schmiddy says. :)

good guide, but my main suggestion would be do not do it with the callipers on the car, and definately not with the wheels on the car. no matter how carefull you are there will be overspray. plus you really dont want to be painting them with pads and rotors, suspension etc all around. spend a little extra time and remove the calipers. :ninja:

good guide, but my main suggestion would be do not do it with the callipers on the car, and definately not with the wheels on the car. no matter how carefull you are there will be overspray. plus you really dont want to be painting them with pads and rotors, suspension etc all around. spend a little extra time and remove the calipers. :D

How would one remove the calipers? Hard? Easy? Someone (if they have time) post up a tut on caliper removing? Thanks!

How would one remove the calipers? Hard? Easy? Someone (if they have time) post up a tut on caliper removing? Thanks!

takes 5minutes...

- remove rims

- pull out wire clips from caliper

- remove 1 pin

- remove backing plate (prevents it flicking out)

- remove 2nd pin

- remove pads and shim plates

- undo 17mm (i think) nuts around the back.

- banjo bolts for brake line (make sure to have an empty bottle nearby to put the bolt in.

  • 2 months later...

to remove calipers ther are two 17mm bolts on the back us a 1/2 inch breaker with small extention crack it then use ur ratchet to take off. dont let the caliper swing on the brake hose..

the front su can turn the hub. get a rattlegun in ther and do it that way.. well u can on toyotas.. :(

i reckomend a die grinder to etch out NISSAN after u painted over it.. :(

Better than a die grinder is a piece of wet and dry and a cork block.

Just rub the paint back until you get a nice shiney "nissan"

But be careful, one touch of your nice fresh paint will piss you right off :D

  • 3 months later...

Yep,

Get yourself some Wet and Dry, quite fine grade.

Also, get cork or wooden block.

Wrap wet and dry around the wooden block and carefully sand back the paint.

This is exactly how I did it to mine. The Nissan come up looking brushed and it really makes the calipers look great.

i just removed wheel .. covered hub in news paper and wheel arches and side of car and sprayed in my garage with no wind ..

make sure u tape correctly and make sure you get all the paint off if you didnt mask the disc could smell funny or cause irregular braking which you obviously dont want

I used a wire brush on a drill.Went right back to bare metal.

The paint was great and still is quite good.the rears are pretty much as anodised red as they were when they were first done.though the fronts are faded due to track days and instead of being anodised red they have faded slightly.but still resemble the red colour.i will post up before and now shots tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...