Jump to content
SAU Community

Recommended Posts

Hi guys,

I noticed today that where the passengers feet go, it is leaking water(or something).

Im assuming that the big white box under there is the air con?

I had a look under their and its coming from the white box (air con? again not sure).

Can anyone help me resolve this problem?

Thanks

Stel

Link to comment
https://www.sau.com.au/forums/topic/99121-leaking-liquid-under-passengers-feet/
Share on other sites

I had a look under their and its coming from the white box (air con? again not sure).

Yes it's the aircon unit (evaporator) and the water is probably due to a blocked drain hose. Condensation from the evaporator drops to the bottom of the box and drained to the outside of the car through a rubber hose that passes through the firewall into the engine bay. The hose will be attached somewhere near the bottom of the box. You need to check it isn't blocked in the engine bay (look for a black hose coming fom the firewall on the passenger probably with a right angle bend toward the road), or by crap that gathers in the bottom of the box after many years of use.

Yes it's the aircon unit (evaporator) and the water is probably due to a blocked drain hose.  Condensation from the evaporator drops to the bottom of the box and drained to the outside of the car through a  rubber hose that passes through the firewall into the engine bay.  The hose will be attached somewhere near the bottom of the box.  You need to check it isn't blocked in the engine bay (look for a black hose coming fom the firewall on the passenger probably with a right angle bend toward the road), or by crap that gathers in the bottom of the box after many years of use.

Thanks for the info mate.

I will have a look tomorrow.

Thanks for the info mate.

I will have a look tomorrow.

There is another possibility....heater core. In that case tho the leaking fluid will be either green if your using coolant (although some coolants are red) or rust coloured water if your not (and that would probably explain the leak). Let's hope it's not the heater core.

yeah could well be heater core so check for loss of coolant....and if it is get ready for a big labour bill from the mechanic or a frustrating weeekend if you do it yourself.

All for a couple of cm of rubber pipe.....

oh man. heater core replacement is generally about 10 hours labour if you are using a good, quick mechanic. if they are slow, it will be more.

when the heater core exploded on our daihatsu we just looped the hoses and bypassed it. not recomended though as the heater can be useful for demisting the screen. either way you need to get it seen to asap.

My heater core went a little while ago... haven't gotten around to replacing it yet - just looped the coolant lines until I can be f**ked ripping the dash out...

yep...

by passed it today...

I just couldn't be bothered mucking around with taking the dash out.

I got quoted from 2 mechanic's, one 700 (performance mechanic) and another mechanic (who im selling his business for him) 1300.

FU*K THAT! lol

I think i would rather freeze in winter....

Thanks for the help guys :blink:

Stel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...